Re: OpenBSD/octeon on EdgeRouter PoE - my experience

W dniu 2017-04-25 o 03:14, Doggie pisze:
> And here is a couple of suggestions after my thorough reading of
> "INSTALL.octeon" doc and experiments performed afterwards:
>
> - replacing all occurrences of "rootdev=sd0" with "rootdev=/dev/sd0",
> which fixes the issue with boot process stopping in the middle and
> asking for "root device:"
>
> - replacing all occurrences of "$loadaddr" with "${loadaddr}" - just a
> cosmetic change
>
> - putting an information that a kernel meant to be used, should actually
> be copied to MSDOS partition, so that U-Boot can load it upon boot, e.g.
> by doing this:
> mount /dev/sd0i /mnt && cp /bsd /mnt/bsd && umount /mnt

Apart from the above, I'd like to suggest more explicit information that
a switch in PoE is not supported at the moment - in this section of
"INSTALL.octeon" doc:

"Ubiquiti Networks EdgeRouter Lite / PoE
onboard serial port, Ethernet and USB controller are supported."

as this could be a deal-breaker for some ports hungry folks :)

--
Cheers,
Pawel Waga