Re: IPsec help: too much NAT!

> NET-P <x> GW-Q <-> internet <-> GW-H <x> GW-V <x> NET-V

> In the schematic above, '<x>' represents a NAT translation point.
> '<->' is a regular router interconnect.

Except for where I screwed up, of course. That should read:

NET-P <x> GW-Q <-> internet <-> GW-H <x> GW-V <-> NET-V

I.e. the GW-V <-> NET-V interface is native, not translated.

Sorry for the screw-up :-P