Re: Cannot set swap priority to "move" swap on another disk.

Solene Rapenne wrote:
> Eric Huiban <grompf@grompf.net> wrote:
>> Hello,
>>
>> With "6.3 release" version, i'm unable to set swap priority with fstab
>> using the following :
>>
>> 2e04cb867188f137.b none swap sw,priority=0
>> e7f9094bf357d407.b none swap sw,priority=1
>>
>> I get the following result :
>>
>> $ swapctl
>> Device      512-blocks     Used    Avail Capacity  Priority
>> /dev/sd0b     21941640        0 21941640     0%    0
>> /dev/sd1b     62524916        0 62524916     0%    0
>> Total         84466556        0 84466556     0%
>>
>> Using "swapctl -a -p 1 e7f9094bf357d407.b" present the very same result.
>> Same for "swapctl -a -p 1 /dev/sd0b".
>> Also tried an hypothetic reboot...
>>
>> Do you have an idea on what i missed here ?
>>
>> Regards,
>> Eric.
> Hello,
>
> I tried on amd64 6.3 and on amd64 -current and I have not been able to
> reproduce the issue.
>
> What is the result if you remove your 2 swaps with
>
> # swapctl -d e7f9094bf357d407.b
> # swapctl -d 2e04cb867188f137.b
>
> and that you type
>
> # swapctl -A
>
> after this, you should see the priorities correctly assigned after
> typing "swapctl".
>
>
Hello,

I performed what you just suggested :

Tried to remove the two swaps : OK none remaining
Tried to reload the fstab : OK got priorities 0 and 1
Performed "halt -p" : OK computer dead like a stone
Power on...
Check swapctl : two swaps present with both priority at 0.

There's something i do not master within the boot process.

Note : this host has been freshly reinstalled with wiped out SSD.

Eric.