There is a 6.5-current VM running with QEMU on linux host. Usually the
VM is being updated to the latest snapshot once per 10 days. Everything
was OK with with 2019-04-21 snapshot. The problem has been appeared
since 2019-05-01 snapshot.
The VM is installed on a dedicated drive with FDE. It is detected as sd0
by bsd.rd booted from install65.iso. But once installer is started the
drive disappears. Here is full output:
>> OpenBSD/amd64 CDBOOT 3.43
boot>
cannot open cd0a:/etc/random.seed: No such file or directory
booting cd0a:/6.5/amd64/bsd.rd: 3691345+1532928+3889096+0+598016
[373454+128+451752+300829]=0xa58318
entry point at 0xffffffff81001000
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.5-current (RAMDISK_CD) #50: Fri May 31 20:22:49 MDT 2019
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2130558976 (2031MB)
avail mem = 2062069760 (1966MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf5b10 (9 entries)
bios0: vendor SeaBIOS version "1.12.0-20181126_142135-anatol"
date 04/01/2014
bios0: QEMU Standard PC (i440FX + PIIX, 1996)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 2.5+, 2295.00 MHz, 06-06-03
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF,MELTDOWN
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: apic clock running at 1000MHz
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu at acpi0 not configured
"ACPI0006" at acpi0 not configured
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
"ACPI0010" at acpi0 not configured
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 0
int 11
"Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
vga1: aperture needed
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 08:00:27:77:c1:d5
virtio0: msix shared
virtio1 at pci0 dev 5 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus0 at vioblk0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct
fixed
sd0: 114473MB, 512 bytes/sector, 234441632 sectors
virtio1: msix shared
virtio2 at pci0 dev 6 function 0 "Qumranet Virtio Memory Balloon" rev
0x00
virtio2: no matching child driver; not configured
ahci0 at pci0 dev 7 function 0 "Intel 82801I AHCI" rev 0x02: apic 0
int 11, AHCI 1.0
ahci0: port 0: 1.5Gb/s
scsibus1 at ahci0: 32 targets
cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> ATAPI 5/cdrom
removable
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.5 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s
# bioctl -c C -l /dev/sd0a softraid0
bioctl: could not open /dev/sd0a: No such file or directory
# ls /dev
MAKEDEV cua01 klog rcd0c rrd0c rwd0g rwd0o ttyC0 wd0g wd0o
bio diskmap kmem rd0a rst0 rwd0h rwd0p urandom wd0h wd0p
bpf enrst0 ksyms rd0c rwd0a rwd0i stderr wd0a wd0i wskbd0
bpf0 erst0 mem rfd0a rwd0b rwd0j stdin wd0b wd0j wskbd1
cd0a fd0a nrst0 rfd0b rwd0c rwd0k stdout wd0c wd0k wskbd2
cd0c fd0b null rfd0c rwd0d rwd0l tty wd0d wd0l xf86
console fd0c random rfd0i rwd0e rwd0m tty00 wd0e wd0m zero
cua00 fd0i rcd0a rrd0a rwd0f rwd0n tty01 wd0f wd0n
Does anyone know the cause of this problem?
Thanks.
--
MS
No comments:
Post a Comment