Hi Fabian,
the today posted patch from Marc Kettenis works on my system -
https://marc.info/?l=openbsd-tech&m=160383074317608&w=2
For test purposes you can download my build BOOTX64.EFI from
http://mailinglist.fusion-zone.net/BOOTX64.EFI
Just replace it in your EFI partition. Please make a backup of your
BOOTX64.efi or download the original BOOTX64.EFI from
https://cdn.openbsd.org/pub/OpenBSD/6.7/amd64/ (in case of an error) again.
Best regards,
Sven
On 10/27/20 9:30 PM, Fabian wrote:
> Hello misc,
>
> I recently upgraded from OpenBSD 6.7 release to the new 6.8 release on an Intel
> NUC Kit NUC7PJYH mini server. That machine ran OpenBSD without problems since
> version 6.5 and has been running 6.7 release (including all sypatches) until a
> day or so. The machine boots via UEFI and the disk is GPT partitioned. See
> below for a dmesg from OpenBSD 6.7.
>
> However, after I performed an interactive upgrade to OpenBSD 6.8 release, the
> machine remains stuck during boot after displaying the message "entry point at:
> 0x1001000", and nothing else happens. I have to long-press the power button to
> force it to shut down.
>
> I spent some time researching the issue, and I know the following so far:
> * The machine boots exclusively via UEFI. There is no legacy boot option
> available, as far as I can see, that could act as a temporary workaround.
>
> * The new boot loader version from OpenBSD 6.8 that is installed now on disk
> does not seem to be the problem. I can do various things in the boot menu,
> including changing the terminal configuration and all the other usual things.
> So boot loader stages 1 and 2 load fine. During my trials to debug the
> problem, I realised that I had an old OpenBSD 6.7 kernel file on disk in the
> form of a 'bsd.booted' file. Surprisingly, that kernel booted without
> problems using the new boot loader and with the latest release binaries. Of
> course, the booted system was not 100 per cent usable, because of the
> mismatch between kernel and binaries.
>
> * I had a look at the output of 'machine memory' in the boot menu, but could
> not see any obvious problems there.
>
> * The OpenBSD 6.8 ram disk kernel boots fine, but neither do the installed 6.8
> single or multiprocessor kernels. I tried both.
>
> * I noticed in the dmesg from the OpenBSD 6.8 ram disk kernel that the EFI
> frame buffer (efifb) is now recognised, which was not the case before. This
> probably has nothing to do with the boot problem, but I wanted to mention it
> for completeness.
>
> * There have been various reports of similar boot problems recently. Here are
> some examples:
> https://www.reddit.com/r/openbsd/comments/je7c8r/stuck_at_boot_after_upgrading_to_68/
> https://andinus.nand.sh/writings/2020/OpenBSD-6.8-EFI-boot-failure.html
> https://marc.info/?l=openbsd-misc&m=160376706629651
> https://marc.info/?l=openbsd-misc&m=160224393101534
> https://marc.info/?l=openbsd-misc&m=159147446008114
>
> * I saw the patches posted by Kastus Shchuka and Marc Kettenis, but I haven't
> had time to build a custom release yet to test them.
>
> I want to avoid rolling back to version 6.7 and figure out what the problem is.
> What else can I try?
>
> Cheers.
> Fabian
>
> OpenBSD 6.7 (GENERIC.MP) #2: Thu Jun 4 09:55:08 MDT 2020
> root@syspatch-67-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8166744064 (7788MB)
> avail mem = 7906615296 (7540MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 3.1 @ 0x6bf67000 (49 entries)
> bios0: vendor Intel Corp. version "JYGLKCPX.86A.0055.2020.0603.1745" date 06/03/2020
> bios0: Intel Corporation NUC7PJYH
> acpi0 at bios0: ACPI 6.1
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT UEFI BGRT TPM2 DMAR WDAT WSMT
> acpi0: wakeup devices SIO1(S3) HDAS(S3) XHC_(S4) XDCI(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 19200000 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz, 1496.43 MHz, 06-7a-01
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu0: 4MB 64b/line 16-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 19MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz, 1495.87 MHz, 06-7a-01
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu1: 4MB 64b/line 16-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz, 1495.87 MHz, 06-7a-01
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu2: 4MB 64b/line 16-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Pentium(R) Silver J5005 CPU @ 1.50GHz, 1495.87 MHz, 06-7a-01
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu3: 4MB 64b/line 16-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (RP01)
> acpiprt2 at acpi0: bus -1 (RP02)
> acpiprt3 at acpi0: bus 1 (RP03)
> acpiprt4 at acpi0: bus -1 (RP04)
> acpiprt5 at acpi0: bus 2 (RP05)
> acpiprt6 at acpi0: bus -1 (RP06)
> acpiec0 at acpi0
> acpipwrres0 at acpi0: DRST
> acpipwrres1 at acpi0: DRST
> acpipwrres2 at acpi0: DRST
> acpipwrres3 at acpi0: DRST
> acpipwrres4 at acpi0: DRST
> acpipwrres5 at acpi0: DRST
> acpipwrres6 at acpi0: WRST
> acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS
> acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS
> acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS
> acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS
> acpipwrres7 at acpi0: FN00, resource for FAN0
> acpitz0 at acpi0: critical temperature is 95 degC
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> "ALPS0001" at acpi0 not configured
> "WCOM508E" at acpi0 not configured
> acpicmos0 at acpi0
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: SLPB
> glkgpio0 at acpi0: GPO1 uid 1 addr 0xd0c40000/0xcef irq 14, 80 pins
> glkgpio1 at acpi0: GPO0 uid 2 addr 0xd0c50000/0xaff irq 14, 80 pins
> glkgpio2 at acpi0: GPO2 uid 3 addr 0xd0c90000/0x7bf irq 15, 20 pins
> glkgpio3 at acpi0: GPO3 uid 4 addr 0xd0c80000/0x82f irq 14, 35 pins
> "INT0E0C" at acpi0 not configured
> "INT33A1" at acpi0 not configured
> "MSFT0101" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: Enhanced SpeedStep 1496 MHz: speeds: 1501, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x03
> inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 605" rev 0x03
> drm0 at inteldrm0
> inteldrm0: msi, GEMINILAKE, gen 9
> "Intel Gemini Lake CNVi" rev 0x03 at pci0 dev 12 function 0 not configured
> azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev 0x03: msi
> azalia0: codecs: Realtek/0x0235, Intel/0x280d, using Realtek/0x0235
> audio0 at azalia0
> vendor "Intel", unknown product 0x319a (class communications subclass miscellaneous, rev 0x03) at pci0 dev 15 function 0 not configured
> ahci0 at pci0 dev 18 function 0 "Intel Gemini Lake AHCI" rev 0x03: msi, AHCI 1.3.1
> ahci0: port 0: 6.0Gb/s
> ahci0: PHY offline on port 1
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 860, RVT0> naa.5002538e4021991a
> sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
> ppb0 at pci0 dev 19 function 0 "Intel Gemini Lake PCIE" rev 0xf3: msi
> pci1 at ppb0 bus 1
> rtsx0 at pci1 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
> sdmmc0 at rtsx0: 4-bit, dma
> ppb1 at pci0 dev 19 function 2 "Intel Gemini Lake PCIE" rev 0xf3: msi
> pci2 at ppb1 bus 2
> re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400), msi, address XX:XX:XX:XX:XX:XX
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> xhci0 at pci0 dev 21 function 0 "Intel Gemini Lake xHCI" rev 0x03: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> sdhc0 at pci0 dev 28 function 0 "Intel Gemini Lake eMMC" rev 0x03: apic 1 int 39
> sdhc0: SDHC 3.0, 200 MHz base clock
> sdmmc1 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
> pcib0 at pci0 dev 31 function 0 "Intel Gemini Lake LPC" rev 0x03
> "Intel Gemini Lake SMBus" rev 0x03 at pci0 dev 31 function 1 not configured
> isa0 at pcib0
> isadma0 at isa0
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: probed fifo depth: 0 bytes
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
> efifb at mainbus0 not configured
> fdc0: drive 0: unknown device type 0xf0
> sdmmc1: can't enable card
> ugen0 at uhub0 port 9 "Intel product 0x0aaa" rev 2.00/0.02 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (195431a84f9040b4.a) swap on sd0b dump on sd0b
> [drm] GuC: No firmware known for this platform!
> [drm] HuC: No firmware known for this platform!
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> fdc0: drive 1: unknown device type 0xf0
> hw.sensors.cpu0.temp0=41.00 degC
> hw.sensors.acpitz0.temp0=41.00 degC (zone temperature)
>
No comments:
Post a Comment