[ 0.000000] Linux version 5.9.8-gentoo-x86_64 (root@nana) (gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.34 p6) 2.34.0) #3 SMP Sun Nov 15 15:55:27 GMT 2020
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.9.8-gentoo-x86_64 root=UUID=45a4a2fb-15c5-4d51-85a0-7f405d596d12 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aff9e000-0x00000000aff9ffff] type 9
[ 0.000000] BIOS-e820: [mem 0x00000000affa0000-0x00000000affadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000affae000-0x00000000affdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000affe0000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: HP ProLiant MicroServer, BIOS O41 07/29/2011
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000430000000 aka 17152M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xaff90 max_arch_pfn = 0x400000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x37977000-0x37cb2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F8F50 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 0x00000000AFFA0100 00007C (v01 HP ProLiant 20110729 HP 00000097)
[ 0.000000] ACPI: FACP 0x00000000AFFA0290 0000F4 (v03 HP ProLiant 20110729 HP 00000097)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20200717/tbfadt-564)
[ 0.000000] ACPI: DSDT 0x00000000AFFA0620 006947 (v01 HP ProLiant 00000006 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000AFFAE000 000040
[ 0.000000] ACPI: FACS 0x00000000AFFAE000 000040
[ 0.000000] ACPI: APIC 0x00000000AFFA0390 000072 (v01 HP ProLiant 20110729 HP 00000097)
[ 0.000000] ACPI: MCFG 0x00000000AFFA0410 00003C (v01 HP ProLiant 20110729 HP 00000097)
[ 0.000000] ACPI: SPMI 0x00000000AFFA0450 000041 (v05 HP ProLiant 20110729 HP 00000097)
[ 0.000000] ACPI: OEMB 0x00000000AFFAE040 000072 (v01 HP ProLiant 20110729 HP 00000097)
[ 0.000000] ACPI: HPET 0x00000000AFFAB4E0 000038 (v01 HP ProLiant 20110729 HP 00000097)
[ 0.000000] ACPI: EINJ 0x00000000AFFAB520 000130 (v01 AMIER AMI_EINJ 20110729 HP 00000097)
[ 0.000000] ACPI: BERT 0x00000000AFFAB6B0 000030 (v01 AMIER AMI_BERT 20110729 HP 00000097)
[ 0.000000] ACPI: ERST 0x00000000AFFAB6E0 0001B0 (v01 AMIER AMI_ERST 20110729 HP 00000097)
[ 0.000000] ACPI: HEST 0x00000000AFFAB890 0000A8 (v01 AMIER ABC_HEST 20110729 HP 00000097)
[ 0.000000] ACPI: SSDT 0x00000000AFFAB940 000458 (v01 HP ProLiant 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000aff8ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042fffffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 211 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042fffffff]
[ 0.000000] On node 0 totalpages: 4063021
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11199 pages used for memmap
[ 0.000000] DMA32 zone: 716688 pages, LIFO batch:63
[ 0.000000] Normal zone: 52224 pages used for memmap
[ 0.000000] Normal zone: 3342336 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] [mem 0xb0000000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 48 pages/cpu s155928 r8192 d32488 u524288
[ 0.000000] pcpu-alloc: s155928 r8192 d32488 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3999513
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.9.8-gentoo-x86_64 root=UUID=45a4a2fb-15c5-4d51-85a0-7f405d596d12 ro
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 15876476K/16252084K available (12291K kernel code, 1839K rwdata, 3668K rodata, 1100K init, 2380K bss, 375348K reserved, 0K cma-reserved)
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x371/0x531 with crng_init=0
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] ACPI: Core revision 20200717
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.006000] tsc: PIT calibration matches HPET. 1 loops
[ 0.006000] tsc: Detected 1497.525 MHz processor
[ 0.000007] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x159600a168e, max_idle_ns: 440795246732 ns
[ 0.000056] Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.05 BogoMIPS (lpj=1497525)
[ 0.000101] pid_max: default: 32768 minimum: 301
[ 0.000208] LSM: Security Framework initializing
[ 0.000267] SELinux: Initializing.
[ 0.000442] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000569] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.001180] process: using AMD E400 aware idle routine
[ 0.001221] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.001259] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.001304] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.001347] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.001385] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.001610] Freeing SMP alternatives memory: 32K
[ 0.002060] process: System has AMD C1E enabled
[ 0.104668] process: Switch to broadcast mode on CPU0
[ 0.104714] smpboot: CPU0: AMD Turion(tm) II Neo N40L Dual-Core Processor (family: 0x10, model: 0x6, stepping: 0x3)
[ 0.104999] Performance Events: AMD PMU driver.
[ 0.105042] ... version: 0
[ 0.105052] ... bit width: 48
[ 0.105052] ... generic registers: 4
[ 0.105052] ... value mask: 0000ffffffffffff
[ 0.105052] ... max period: 00007fffffffffff
[ 0.105052] ... fixed-purpose events: 0
[ 0.105052] ... event mask: 000000000000000f
[ 0.105052] rcu: Hierarchical SRCU implementation.
[ 0.105052] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.105179] smp: Bringing up secondary CPUs ...
[ 0.105470] x86: Booting SMP configuration:
[ 0.105513] .... node #0, CPUs: #1
[ 0.000000] process: Switch to broadcast mode on CPU1
[ 0.106140] smp: Brought up 1 node, 2 CPUs
[ 0.107066] smpboot: Max logical packages: 2
[ 0.107104] smpboot: Total of 2 processors activated (5990.10 BogoMIPS)
[ 0.109110] devtmpfs: initialized
[ 0.109204] x86/mm: Memory block size: 128MB
[ 0.111699] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.111699] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.112093] xor: measuring software checksum speed
[ 0.122055] prefetch64-sse: 6344.000 MB/sec
[ 0.132055] generic_sse: 6008.000 MB/sec
[ 0.132093] xor: using function: prefetch64-sse (6344.000 MB/sec)
[ 0.132234] NET: Registered protocol family 16
[ 0.132471] audit: initializing netlink subsys (disabled)
[ 0.132535] audit: type=2000 audit(1605543206.138:1): state=initialized audit_enabled=0 res=1
[ 0.132535] thermal_sys: Registered thermal governor 'step_wise'
[ 0.132535] thermal_sys: Registered thermal governor 'user_space'
[ 0.133110] cpuidle: using governor menu
[ 0.133152] node 0 link 0: io port [1000, ffffff]
[ 0.133156] TOM: 00000000d0000000 aka 3328M
[ 0.133195] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.133198] node 0 link 0: mmio [a0000, bffff]
[ 0.133201] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.133204] node 0 link 0: mmio [f0000000, fe6fffff]
[ 0.133207] node 0 link 0: mmio [fe700000, fe8fffff]
[ 0.133209] node 0 link 0: mmio [fe900000, ffdfffff]
[ 0.133211] TOM2: 0000000430000000 aka 17152M
[ 0.133250] bus: [bus 00-1f] on node 0 link 0
[ 0.133251] bus: 00 [io 0x0000-0xffff]
[ 0.133253] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.133254] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.133256] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.133257] bus: 00 [mem 0x430000000-0xfcffffffff]
[ 0.133290] ACPI: bus type PCI registered
[ 0.133314] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.133359] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.133424] PCI: Using configuration type 1 for base access
[ 0.133589] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.134061] mtrr: probably your BIOS does not setup all CPUs.
[ 0.134099] mtrr: corrected configuration.
[ 0.136467] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.156062] raid6: sse2x4 gen() 4154 MB/s
[ 0.173064] raid6: sse2x4 xor() 1203 MB/s
[ 0.190059] raid6: sse2x2 gen() 4239 MB/s
[ 0.207055] raid6: sse2x2 xor() 3285 MB/s
[ 0.224057] raid6: sse2x1 gen() 2884 MB/s
[ 0.241056] raid6: sse2x1 xor() 2244 MB/s
[ 0.241093] raid6: using algorithm sse2x2 gen() 4239 MB/s
[ 0.241131] raid6: .... xor() 3285 MB/s, rmw enabled
[ 0.241690] raid6: using intx1 recovery algorithm
[ 0.241779] ipmi:dmi: Base address is zero, assuming no IPMI interface
[ 0.241854] ACPI: Added _OSI(Module Device)
[ 0.241893] ACPI: Added _OSI(Processor Device)
[ 0.241931] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.241969] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.242008] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.242056] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.242095] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.248672] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.249675] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.250038] ACPI: Dynamic OEM Table Load:
[ 0.250057] random: fast init done
[ 0.250103] ACPI: OEMN 0xFFFF8E5C9E17E000 000624 (v01 AMD NAHP 00000001 INTL 20051117)
[ 0.251949] ACPI: Interpreter enabled
[ 0.251997] ACPI: (supports S0 S5)
[ 0.252035] ACPI: Using IOAPIC for interrupt routing
[ 0.252372] HEST: Table parsing has been initialized.
[ 0.252372] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.252538] ACPI: Enabled 10 GPEs in block 00 to 1F
[ 0.263649] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.263697] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.264148] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 0.264570] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.265123] acpi PNP0A08:00: host bridge window expanded to [mem 0xb0000000-0xdfffffff window]; [mem 0xb0000000-0xdfffffff window] ignored
[ 0.265170] acpi PNP0A08:00: host bridge window expanded to [mem 0xf0000000-0xffffffff window]; [mem 0xf0000000-0xffffffff window] ignored
[ 0.265218] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000cf000-0x000d19ff])
[ 0.265470] PCI host bridge to bus 0000:00
[ 0.265514] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.265554] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.265594] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.265636] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff window]
[ 0.265678] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
[ 0.265721] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.265780] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.266032] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
[ 0.266250] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
[ 0.266311] pci 0000:00:06.0: enabling Extended Tags
[ 0.266385] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.267231] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.267288] pci 0000:00:11.0: reg 0x10: [io 0xd000-0xd007]
[ 0.267335] pci 0000:00:11.0: reg 0x14: [io 0xc000-0xc003]
[ 0.267382] pci 0000:00:11.0: reg 0x18: [io 0xb000-0xb007]
[ 0.267429] pci 0000:00:11.0: reg 0x1c: [io 0xa000-0xa003]
[ 0.267476] pci 0000:00:11.0: reg 0x20: [io 0x9000-0x900f]
[ 0.267523] pci 0000:00:11.0: reg 0x24: [mem 0xfe6ffc00-0xfe6fffff]
[ 0.267775] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.267830] pci 0000:00:12.0: reg 0x10: [mem 0xfe6fe000-0xfe6fefff]
[ 0.268098] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.268154] pci 0000:00:12.2: reg 0x10: [mem 0xfe6ff800-0xfe6ff8ff]
[ 0.268276] pci 0000:00:12.2: supports D1 D2
[ 0.268315] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.268522] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.268577] pci 0000:00:13.0: reg 0x10: [mem 0xfe6fd000-0xfe6fdfff]
[ 0.268841] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.268896] pci 0000:00:13.2: reg 0x10: [mem 0xfe6ff400-0xfe6ff4ff]
[ 0.269020] pci 0000:00:13.2: supports D1 D2
[ 0.269056] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.269259] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.269521] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.269576] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.269623] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.269670] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.269717] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.269763] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.269822] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.269861] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.269901] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.269940] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.270150] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.270418] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.270660] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.270716] pci 0000:00:16.0: reg 0x10: [mem 0xfe6fc000-0xfe6fcfff]
[ 0.270974] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.271030] pci 0000:00:16.2: reg 0x10: [mem 0xfe6ff000-0xfe6ff0ff]
[ 0.271140] pci 0000:00:16.2: supports D1 D2
[ 0.271179] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.271388] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.271585] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.271782] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.271980] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.272200] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.272417] pci_bus 0000:01: extended config space not accessible
[ 0.272500] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[ 0.272548] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.272592] pci 0000:01:05.0: reg 0x14: [io 0xe000-0xe0ff]
[ 0.272635] pci 0000:01:05.0: reg 0x18: [mem 0xfe8f0000-0xfe8fffff]
[ 0.272685] pci 0000:01:05.0: reg 0x24: [mem 0xfe700000-0xfe7fffff]
[ 0.272752] pci 0000:01:05.0: supports D1 D2
[ 0.272884] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.272928] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.272969] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.273010] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.273127] pci 0000:02:00.0: [14e4:165b] type 00 class 0x020000
[ 0.273189] pci 0000:02:00.0: reg 0x10: [mem 0xfe9f0000-0xfe9fffff 64bit]
[ 0.273277] pci 0000:02:00.0: enabling Extended Tags
[ 0.273410] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.273600] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.273647] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.273701] pci_bus 0000:03: extended config space not accessible
[ 0.273807] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.273855] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.273898] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.273940] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.273983] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff window] (subtractive decode)
[ 0.274026] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
[ 0.274069] pci_bus 0000:00: on NUMA node 0
[ 0.274634] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.274798] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.274964] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.275154] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.275298] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.275422] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.275545] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.275668] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.276108] pci 0000:01:05.0: vgaarb: setting as boot VGA device
[ 0.276140] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.276187] pci 0000:01:05.0: vgaarb: bridge control possible
[ 0.276229] vgaarb: loaded
[ 0.276424] SCSI subsystem initialized
[ 0.276512] libata version 3.00 loaded.
[ 0.276512] ACPI: bus type USB registered
[ 0.276512] usbcore: registered new interface driver usbfs
[ 0.276512] usbcore: registered new interface driver hub
[ 0.276512] usbcore: registered new device driver usb
[ 0.276512] pps_core: LinuxPPS API ver. 1 registered
[ 0.276512] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.276512] PTP clock support registered
[ 0.277070] EDAC MC: Ver: 3.0.0
[ 0.277264] PCI: Using ACPI for IRQ routing
[ 0.288421] PCI: pci_cache_line_size set to 64 bytes
[ 0.288480] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.288483] e820: reserve RAM buffer [mem 0xaff90000-0xafffffff]
[ 0.288612] clocksource: Switched to clocksource tsc-early
[ 0.357719] VFS: Disk quotas dquot_6.6.0
[ 0.357795] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.357939] pnp: PnP ACPI init
[ 0.358302] system 00:00: [mem 0xb0000000-0xcfffffff] has been reserved
[ 0.358351] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358491] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.358794] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.358835] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.358879] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359238] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.359283] system 00:03: [io 0x040b] has been reserved
[ 0.359323] system 00:03: [io 0x04d6] has been reserved
[ 0.359362] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.359402] system 00:03: [io 0x0c14] has been reserved
[ 0.359441] system 00:03: [io 0x0c50-0x0c51] has been reserved
[ 0.359482] system 00:03: [io 0x0c52] has been reserved
[ 0.359532] system 00:03: [io 0x0c6c] has been reserved
[ 0.359572] system 00:03: [io 0x0c6f] has been reserved
[ 0.359611] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
[ 0.359652] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
[ 0.359692] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
[ 0.359732] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
[ 0.359771] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
[ 0.359811] system 00:03: [io 0x0800-0x089f] has been reserved
[ 0.359851] system 00:03: [io 0x0b00-0x0b1f] has been reserved
[ 0.359890] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.359930] system 00:03: [io 0x0900-0x090f] has been reserved
[ 0.359970] system 00:03: [io 0x0910-0x091f] has been reserved
[ 0.360009] system 00:03: [io 0xfe00-0xfefe] has been reserved
[ 0.360050] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.360090] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.360131] system 00:03: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.360175] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.360306] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.360351] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.360589] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.360631] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.360671] system 00:05: [mem 0x00100000-0xafffffff] could not be reserved
[ 0.360712] system 00:05: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.361276] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.361456] pnp: PnP ACPI: found 6 devices
[ 0.368746] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.368855] NET: Registered protocol family 2
[ 0.369263] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.369409] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.369945] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.370491] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.370659] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.370859] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.371179] NET: Registered protocol family 1
[ 0.371701] RPC: Registered named UNIX socket transport module.
[ 0.371745] RPC: Registered udp transport module.
[ 0.371782] RPC: Registered tcp transport module.
[ 0.371820] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.371884] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.371926] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.371969] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.372010] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.372055] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.372097] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.372141] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.372194] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.372235] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.372275] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.372315] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xdfffffff window]
[ 0.372355] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff window]
[ 0.372395] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.372434] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 0.372473] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.372520] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.372560] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.372599] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.372639] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.372678] pci_bus 0000:03: resource 7 [mem 0xb0000000-0xdfffffff window]
[ 0.372718] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xffffffff window]
[ 0.372853] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.152838] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x680 took 761628 usecs
[ 1.175864] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x680 took 21974 usecs
[ 1.197858] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x680 took 20958 usecs
[ 1.198395] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.198444] PCI: CLS 64 bytes, default 64
[ 1.198591] Trying to unpack rootfs image as initramfs...
[ 1.250926] Freeing initrd memory: 3312K
[ 1.250986] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.251026] software IO TLB: mapped [mem 0xabf90000-0xaff90000] (64MB)
[ 1.251111] LVT offset 1 assigned for vector 0x400
[ 1.251164] LVT offset 1 assigned
[ 1.251287] perf: AMD IBS detected (0x0000001f)
[ 1.251866] Initialise system trusted keyrings
[ 1.252103] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[ 1.252329] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.275803] NET: Registered protocol family 38
[ 1.275851] Key type asymmetric registered
[ 1.275889] Asymmetric key parser 'x509' registered
[ 1.275960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.276083] io scheduler mq-deadline registered
[ 1.276652] pcieport 0000:00:06.0: PME: Signaling with IRQ 24
[ 1.276843] IPMI message handler: version 39.2
[ 1.276899] ipmi_si: IPMI System Interface driver
[ 1.276984] ipmi_si: Unable to find any System Interface(s)
[ 1.277929] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.277979] ACPI: Power Button [PWRB]
[ 1.278075] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.278118] ACPI: Power Button [PWRF]
[ 1.278192] ACPI: ACPI: processor limited to max C-state 1
[ 1.278582] ERST: Failed to get Error Log Address Range.
[ 1.278652] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
[ 1.278810] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 1.279003] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.285902] brd: module loaded
[ 1.290360] loop: module loaded
[ 1.290522] ahci 0000:00:11.0: version 3.0
[ 1.290982] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.291028] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.291917] scsi host0: ahci
[ 1.292366] scsi host1: ahci
[ 1.292770] scsi host2: ahci
[ 1.293186] scsi host3: ahci
[ 1.293331] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 25
[ 1.293376] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 25
[ 1.293418] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 25
[ 1.293460] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 25
[ 1.293748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.293792] ehci-pci: EHCI PCI platform driver
[ 1.294130] QUIRK: Enable AMD PLL fix
[ 1.294160] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.294332] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.294379] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.294431] ehci-pci 0000:00:12.2: debug port 1
[ 1.294541] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800
[ 1.301584] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.301752] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 1.301801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.301844] usb usb1: Product: EHCI Host Controller
[ 1.301882] usb usb1: Manufacturer: Linux 5.9.8-gentoo-x86_64 ehci_hcd
[ 1.301921] usb usb1: SerialNumber: 0000:00:12.2
[ 1.302263] hub 1-0:1.0: USB hub found
[ 1.302324] hub 1-0:1.0: 5 ports detected
[ 1.303014] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.303220] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.303274] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.303327] ehci-pci 0000:00:13.2: debug port 1
[ 1.303414] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe6ff400
[ 1.309576] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.309760] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 1.309804] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.309846] usb usb2: Product: EHCI Host Controller
[ 1.309885] usb usb2: Manufacturer: Linux 5.9.8-gentoo-x86_64 ehci_hcd
[ 1.309924] usb usb2: SerialNumber: 0000:00:13.2
[ 1.310251] hub 2-0:1.0: USB hub found
[ 1.310311] hub 2-0:1.0: 5 ports detected
[ 1.310912] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.311097] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.311152] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.311204] ehci-pci 0000:00:16.2: debug port 1
[ 1.311286] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe6ff000
[ 1.317576] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.317738] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 1.317782] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.317824] usb usb3: Product: EHCI Host Controller
[ 1.317862] usb usb3: Manufacturer: Linux 5.9.8-gentoo-x86_64 ehci_hcd
[ 1.317901] usb usb3: SerialNumber: 0000:00:16.2
[ 1.318226] hub 3-0:1.0: USB hub found
[ 1.318284] hub 3-0:1.0: 4 ports detected
[ 1.318574] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.318628] ohci-pci: OHCI PCI platform driver
[ 1.318959] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.319131] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.319235] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe6fe000
[ 1.374686] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.09
[ 1.374736] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.374778] usb usb4: Product: OHCI PCI host controller
[ 1.374816] usb usb4: Manufacturer: Linux 5.9.8-gentoo-x86_64 ohci_hcd
[ 1.374855] usb usb4: SerialNumber: 0000:00:12.0
[ 1.375184] hub 4-0:1.0: USB hub found
[ 1.375246] hub 4-0:1.0: 5 ports detected
[ 1.375819] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.376007] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.376098] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe6fd000
[ 1.431689] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.09
[ 1.431739] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.431780] usb usb5: Product: OHCI PCI host controller
[ 1.431819] usb usb5: Manufacturer: Linux 5.9.8-gentoo-x86_64 ohci_hcd
[ 1.432410] usb usb5: SerialNumber: 0000:00:13.0
[ 1.432712] hub 5-0:1.0: USB hub found
[ 1.432769] hub 5-0:1.0: 5 ports detected
[ 1.433313] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.433517] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 1.433608] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe6fc000
[ 1.489683] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.09
[ 1.489732] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.489774] usb usb6: Product: OHCI PCI host controller
[ 1.489812] usb usb6: Manufacturer: Linux 5.9.8-gentoo-x86_64 ohci_hcd
[ 1.489851] usb usb6: SerialNumber: 0000:00:16.0
[ 1.490193] hub 6-0:1.0: USB hub found
[ 1.490256] hub 6-0:1.0: 4 ports detected
[ 1.490538] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.490684] usbcore: registered new interface driver usb-storage
[ 1.490756] i8042: PNP: No PS/2 controller found.
[ 1.490941] mousedev: PS/2 mouse device common for all mice
[ 1.491377] rtc_cmos 00:01: RTC can wake from S4
[ 1.491729] rtc_cmos 00:01: registered as rtc0
[ 1.491808] rtc_cmos 00:01: setting system clock to 2020-11-16T16:13:28 UTC (1605543208)
[ 1.491878] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.492065] usbcore: registered new interface driver usbhid
[ 1.492107] usbhid: USB HID core driver
[ 1.492194] drop_monitor: Initializing network drop monitor service
[ 1.492346] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 1.492582] gre: GRE over IPv4 demultiplexor driver
[ 1.492628] Initializing XFRM netlink socket
[ 1.492720] NET: Registered protocol family 10
[ 1.493270] Segment Routing with IPv6
[ 1.493343] NET: Registered protocol family 17
[ 1.493387] NET: Registered protocol family 15
[ 1.493559] microcode: CPU0: patch_level=0x010000c8
[ 1.493609] microcode: CPU1: patch_level=0x010000c8
[ 1.493801] microcode: Microcode Update Driver: v2.2.
[ 1.493807] IPI shorthand broadcast: enabled
[ 1.493909] sched_clock: Marking stable (1499723829, -5947332)->(1496845189, -3068692)
[ 1.494176] registered taskstats version 1
[ 1.494220] Loading compiled-in X.509 certificates
[ 1.497095] Loaded X.509 cert 'Build time autogenerated kernel key: b346da774bef02e4717748a6d70d129b5e7a17a8'
[ 1.497514] Btrfs loaded, crc32c=crc32c-generic
[ 1.497594] ima: No TPM chip found, activating TPM-bypass!
[ 1.497639] ima: Allocated hash algorithm: sha1
[ 1.497686] ima: No architecture policies found
[ 1.498556] APEI: Can not request [mem 0xaffab650-0xaffab6a3] for APEI BERT registers
[ 1.498734] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.622641] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.764617] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.764711] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.764796] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.764866] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.765308] ata1.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 1.765388] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.765532] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 1.765594] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.765665] ata4.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 1.765725] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.765850] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
[ 1.765899] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.766254] ata1.00: configured for UDMA/133
[ 1.766401] ata4.00: configured for UDMA/133
[ 1.766548] ata3.00: configured for UDMA/133
[ 1.766646] usb 1-3: New USB device found, idVendor=0b95, idProduct=7720, bcdDevice= 0.01
[ 1.766711] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.766731] scsi 0:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 5
[ 1.766760] usb 1-3: Product: AX88x72A
[ 1.766851] usb 1-3: Manufacturer: ASIX Elec. Corp.
[ 1.766895] usb 1-3: SerialNumber: 0BCFF0
[ 1.767336] ata2.00: configured for UDMA/133
[ 1.767427] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.767508] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.767563] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.767656] sd 0:0:0:0: [sda] Write Protect is off
[ 1.767704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.767756] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.767837] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 1.768322] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.768604] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.768657] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.768684] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5
[ 1.768710] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.768784] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.768809] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.769124] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.769257] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.769308] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.769366] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.769406] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.769450] scsi 3:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 5
[ 1.769593] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.769927] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.770507] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.770563] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 1.770856] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.770910] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.771043] sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.775983] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.780587] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 1.791178] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.792786] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.799861] tsc: Refined TSC clocksource calibration: 1497.506 MHz
[ 1.799934] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1595eea82e6, max_idle_ns: 440795216463 ns
[ 1.800160] clocksource: Switched to clocksource tsc
[ 1.807491] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.808417] Freeing unused kernel image (initmem) memory: 1100K
[ 1.813176] Write protecting the kernel read-only data: 18432k
[ 1.815162] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.815643] Freeing unused kernel image (rodata/data gap) memory: 428K
[ 1.815699] Run /init as init process
[ 1.815743] with arguments:
[ 1.815745] /init
[ 1.815747] with environment:
[ 1.815749] HOME=/
[ 1.815751] TERM=linux
[ 1.815753] BOOT_IMAGE=/vmlinuz-5.9.8-gentoo-x86_64
OpenBSD 6.8 (RAMDISK_CD) #94: Sun Oct 4 18:21:11 MDT 2020
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16625762304 (15855MB)
avail mem = 16117866496 (15371MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfb330 (35 entries)
bios0: vendor HP version "O41" date 07/29/2011
bios0: HP ProLiant MicroServer
acpi0 at bios0: ACPI 3.0
acpi0: tables DSDT FACP APIC MCFG SPMI OEMB HPET EINJ BERT ERST HEST SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Turion(tm) II Neo N40L Dual-Core Processor, 1497.74 MHz, 10-06-03
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpi0: unable to load \\_SB_._INI.EXH2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE4)
acpiprt4 at acpi0: bus 2 (PCE6)
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
"PNP0C0C" at acpi0 not configured
acpicpu at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "Hewlett-Packard", unknown product 0x9602 rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5723" rev 0x10, BCM5784 A1 (0x5784100): msi, address 00:9c:02:97:5b:85
brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD30EFRX-68A, 80.0> naa.50014ee602de9dc4
sd0: 2861588MB, 512 bytes/sector, 5860533168 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD30EFRX-68E, 82.0> naa.50014ee2b96460c6
sd1: 2861588MB, 512 bytes/sector, 5860533168 sectors
sd2 at scsibus0 targ 2 lun 0: <ATA, WDC WD30EFRX-68E, 80.0> naa.50014ee603e9e4f7
sd2: 2861588MB, 512 bytes/sector, 5860533168 sectors
sd3 at scsibus0 targ 3 lun 0: <ATA, WDC WD30EFRX-68A, 80.0> naa.50014ee6ad893520
sd3: 2861588MB, 512 bytes/sector, 5860533168 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
"ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PIONEER, BD-RW BDR-207M, 1.21> removable
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci3 at ppb2 bus 3
ohci2 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD 10h DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD 10h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
axe0 at uhub0 port 3 configuration 1 interface 0 "vendor 0x0b95 product 0x7720" rev 2.00/0.01 addr 2
axe0: AX88772, address 00:50:b6:0b:cf:f0
ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0006
umass0 at uhub1 port 3 configuration 1 interface 0 "SanDisk Corp. SDDR-113" rev 2.00/1.27 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd4 at scsibus2 targ 1 lun 0: <SanDisk, SDDR-113, 1.00> removable serial.0781a7a86333011111B1
sd4: 1886MB, 512 bytes/sector, 3862528 sectors
uhidev0 at uhub3 port 5 configuration 1 interface 0 "USB USB Keykoard" rev 1.10/1.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay1
uhidev1 at uhub3 port 5 configuration 1 interface 1 "USB USB Keykoard" rev 1.10/1.10 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhidev2 at uhub4 port 1 configuration 1 interface 0 "Dell Dell USB Optical Mouse" rev 2.00/43.01 addr 2
uhidev2: iclass 3/1
uhid at uhidev2 not configured
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
umass1 at uhub0 port 2 configuration 1 interface 0 " " rev 2.00/1.00 addr 3
umass1: using SCSI over Bulk-Only
scsibus4 at umass1: 2 targets, initiator 0
sd5 at scsibus4 targ 1 lun 0: <, , 1.00> removable serial.13fe4100211C29D362CA
sd5: 3824MB, 512 bytes/sector, 7831552 sectors
On 16/11/2020 04:49, Bodie wrote:
> Can you show what is in /proc/cpuinfo in Linux host and possibly even
> its dmesg?
Thanks for trying to help - sure, here's /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Turion(tm) II Neo N40L Dual-Core Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 1000.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc
cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic
cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
nodeid_msr hw_pstate vmmcall npt lbrv svm_lock nrip_save
bugs : tlb_mmatch apic_c1e fxsave_leak sysret_ss_attrs null_seg
amd_e400 spectre_v1 spectre_v2
bogomips : 2995.05
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Turion(tm) II Neo N40L Dual-Core Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 800.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc
cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic
cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
nodeid_msr hw_pstate vmmcall npt lbrv svm_lock nrip_save
bugs : tlb_mmatch apic_c1e fxsave_leak sysret_ss_attrs null_seg
amd_e400 spectre_v1 spectre_v2
bogomips : 2995.05
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
Attached dmesg.linux with dmesg up to when it starts with initrd - let
me know if you would like to see more, as I didn't want to attach a
massive file (Linux knows how to pollute dmesg).
> Any chance to try live OpenBSD there to get dmesg too?
Harder to get dmesg from installcd than anticipated, but attached as
dmesg.baremetal :-)
> What is the OS version and Qemu/KVM version on that Linux host?
Linux kernel is 5.9.8 and qemu is 5.1.0-r2 (the -r2 is just for Gentoo,
so perhaps ignore that).
No comments:
Post a Comment