Re: Raspberry Pi 4 Model B

On Tue, Sep 28, 2021 at 10:04:25AM -0700, Joseph Olatt wrote:
> I tried the following snapshot:
>
> https://cdn.openbsd.org/pub/OpenBSD/snapshots/arm64/miniroot70.img
>
> Build date: 27-Sep-2021 20:10
> Size: 45088768
>
> Didn't have much luck. The install process rebooted after the following
> error:
>
> bwfm0: failed loadfirmware of file brcmfmac43455-sdio.raspberrypi,4-model-b.bin
> panic: do_el0_error

What happens when you boot with -c and 'disable bwfm' then exit? Is that not
an option anymore?


Best Regards,
-peter

PS: look lower at boot line below

> Wonder if the following error in the beginning (full transcript of
> install process listed below):
>
> libfdt fdt_check_header(): FDT_ERR_BADMAGIC
>
> has anything to do with my woes...
>
> Next, I'll try the pftf UEFI firmware mentioned in INSTALL.arm64, per
> your suggestion, as soon as I find some spare time.
>
>
> /* Full transcript of install */
> Connected to /dev/cuaU0 (speed 115200)
>
>
> U-Boot 2021.07 (Aug 12 2021 - 02:45:29 -0600)
>
> DRAM: 3.9 GiB
> RPI 4 Model B (0xc03114)
> MMC: mmcnr@7e300000: 1, emmc2@7e340000: 0
> Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... In: serial
> Out: serial
> Err: serial
> Net: eth0: ethernet@7d580000
> PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
> starting USB...
> Bus xhci_pci: Register 5000420 NbrPorts 5
> Starting the controller
> USB XHCI 1.00
> scanning bus xhci_pci for devices... 2 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> Card did not respond to voltage select! : -110
> Scanning disk mmcnr@7e300000.blk...
> Disk mmcnr@7e300000.blk not ready
> Scanning disk emmc2@7e340000.blk...
> ** Unrecognized filesystem type **
> Found 3 disks
> No EFI system partition
> BootOrder not defined
> EFI boot manager: Cannot load any image
> Found EFI removable media binary efi/boot/bootaa64.efi
> 170694 bytes read in 33 ms (4.9 MiB/s)
> libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> Booting /efi\boot\bootaa64.efi
> disks: sd0*
> >> OpenBSD/arm64 BOOTAA64 1.6
> boot>

^^^^^---- right here type -c or 'boot -c'



> cannot open sd0a:/etc/random.seed: No such file or directory
> booting sd0a:/bsd: 2574016+699492+13009456+629216 [216000+109+596472+233168]=0x14014c8
> type 0x0 pa 0x0 va 0x0 pages 0x1 attr 0x8
> type 0x7 pa 0x1000 va 0x1000 pages 0x1ff attr 0x8
> type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8
> type 0x7 pa 0x4200000 va 0x4200000 pages 0x3cf0 attr 0x8
> type 0x9 pa 0x7ef0000 va 0x7ef0000 pages 0x20 attr 0x8
> type 0x7 pa 0x7f10000 va 0x7f10000 pages 0x31ef0 attr 0x8
> type 0x4 pa 0x39e00000 va 0x39e00000 pages 0x1 attr 0x8
> type 0x7 pa 0x39e01000 va 0x39e01000 pages 0x1 attr 0x8
> type 0x2 pa 0x39e02000 va 0x39e02000 pages 0x100 attr 0x8
> type 0x1 pa 0x39f02000 va 0x39f02000 pages 0x2a attr 0x8
> type 0x0 pa 0x39f2c000 va 0x39f2c000 pages 0x7 attr 0x8
> type 0x4 pa 0x39f33000 va 0x39f33000 pages 0x1 attr 0x8
> type 0x6 pa 0x39f34000 va 0x3d35274000 pages 0x1 attr 0x8000000000000008
> type 0x4 pa 0x39f35000 va 0x39f35000 pages 0x2 attr 0x8
> type 0x0 pa 0x39f37000 va 0x39f37000 pages 0x1 attr 0x8
> type 0x6 pa 0x39f38000 va 0x3d35278000 pages 0x3 attr 0x8000000000000008
> type 0x4 pa 0x39f3b000 va 0x39f3b000 pages 0x1 attr 0x8
> type 0x6 pa 0x39f3c000 va 0x3d3527c000 pages 0x4 attr 0x8000000000000008
> type 0x0 pa 0x39f40000 va 0x39f40000 pages 0x1 attr 0x8
> type 0x4 pa 0x39f41000 va 0x39f41000 pages 0x1 attr 0x8
> type 0x0 pa 0x39f42000 va 0x39f42000 pages 0x1 attr 0x8
> type 0x4 pa 0x39f43000 va 0x39f43000 pages 0x2 attr 0x8
> type 0x0 pa 0x39f45000 va 0x39f45000 pages 0x1 attr 0x8
> type 0x4 pa 0x39f46000 va 0x39f46000 pages 0x2 attr 0x8
> type 0x2 pa 0x39f48000 va 0x39f48000 pages 0x1408 attr 0x8
> type 0x5 pa 0x3b350000 va 0x3d36690000 pages 0x10 attr 0x8000000000000008
> type 0x2 pa 0x3b360000 va 0x3b360000 pages 0xa0 attr 0x8
> type 0x0 pa 0x3ef5c000 va 0x3ef5c000 pages 0x1 attr 0x8
> type 0x4 pa 0x40000000 va 0x40000000 pages 0xbc000 attr 0x8
> type 0xb pa 0xfe100000 va 0x3d366a0000 pages 0x1 attr 0x8000000000000000
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
>
> OpenBSD 7.0 (RAMDISK) #1249: Mon Sep 27 20:10:08 MDT 2021
> deraadt@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK
> real mem = 4124962816 (3933MB)
> avail mem = 3961278464 (3777MB)
> random: good seed from bootblocks
> mainbus0 at root: Raspberry Pi 4 Model B Rev 1.4
> cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3
> cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
> cpu0: 1024KB 64b/line 16-way L2 cache
> cpu0: CRC32,ASID16
> efi0 at mainbus0: UEFI 2.8
> efi0: Das U-Boot rev 0x20210700
> "system" at mainbus0 not configured
> "axi" at mainbus0 not configured
> simplebus0 at mainbus0: "soc"
> bcmclock0 at simplebus0
> bcmmbox0 at simplebus0
> bcmgpio0 at simplebus0
> bcmaux0 at simplebus0
> ampintc0 at simplebus0 nirq 256, ncpu 4: "interrupt-controller"
> syscon0 at simplebus0: "avs-monitor"
> "thermal" at syscon0 not configured
> bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9
> "timer" at simplebus0 not configured
> pluart0 at simplebus0: console
> "local_intc" at simplebus0 not configured
> bcmdog0 at simplebus0
> bcmirng0 at simplebus0
> "firmware" at simplebus0 not configured
> "power" at simplebus0 not configured
> "mailbox" at simplebus0 not configured
> sdhc0 at simplebus0
> sdhc0: SDHC 3.0, 250 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
> "gpiomem" at simplebus0 not configured
> "fb" at simplebus0 not configured
> "vcsm" at simplebus0 not configured
> "clocks" at mainbus0 not configured
> "phy" at mainbus0 not configured
> "clk-27M" at mainbus0 not configured
> "clk-108M" at mainbus0 not configured
> simplebus1 at mainbus0: "emmc2bus"
> sdhc1 at simplebus1
> sdhc1: SDHC 3.0, 100 MHz base clock
> sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
> "arm-pmu" at mainbus0 not configured
> agtimer0 at mainbus0: 54000 kHz
> simplebus2 at mainbus0: "scb"
> bcmpcie0 at simplebus2
> pci0 at bcmpcie0
> bse0 at simplebus2: address e4:5f:01:40:4d:18
> brgphy0 at bse0 phy 1: BCM54210E 10/100/1000baseT PHY, rev. 2
> "dma" at simplebus2 not configured
> "hevc-decoder" at simplebus2 not configured
> "rpivid-local-intc" at simplebus2 not configured
> "h264-decoder" at simplebus2 not configured
> "vp9-decoder" at simplebus2 not configured
> "leds" at mainbus0 not configured
> "sd_io_1v8_reg" at mainbus0 not configured
> "sd_vcc_reg" at mainbus0 not configured
> "fixedregulator_3v3" at mainbus0 not configured
> "fixedregulator_5v0" at mainbus0 not configured
> simplebus3 at mainbus0: "v3dbus"
> "bootloader" at mainbus0 not configured
> scsibus0 at sdmmc1: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable
> sd0: 30528MB, 512 bytes/sector, 62521344 sectors
> bwfm0 at sdmmc0 function 1
> manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 2 not configured
> manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 3 not configured
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> WARNING: CHECK AND RESET THE DATE!
> gpio at bcmgpio0 not configured
> bwfm0: failed loadfirmware of file brcmfmac43455-sdio.raspberrypi,4-model-b.bin
> panic: do_el0_error
> syncing disks... done
>
> dump to dev 17,1 not possible
> rebooting...
>