thanks Philip for your diagnostic. I will be available to make some tests when someone will have time to spend on it.
Thanks a lot.
Regards,
Comete
4 juillet 2024 07:14 "Philip Guenther" <guenther@gmail.com> a écrit:
> On Mon, Jun 24, 2024 at 2:16 AM Comète <comete@geekandfree.org> wrote:
>
>> finally i'm still stuck on this problem. Are there any other tests I can do ?
>
> It looks like this machine has a physical memory layout (available
> physical addresses) that OpenBSD doesn't currently support, and the
> usual suspects have other things going so no immediate plans to work
> on changing that. Sorry it won't work for you.
>
> Philip Guenther
>
>> Thank you
>>
>> Comete
>>
>> 27 mai 2024 21:24 "Comète" <comete@geekandfree.org> a écrit:
>>
>> Hi Aaron,
>>
>> thanks for the idea. Booting the regular kernel as suggested, has the same result:
>> it freezes on "entry point at 0x1001000" too.
>>
>> Thanks a lot.
>>
>> Comete
>>
>> 27 mai 2024 04:48 "Aaron Mason" <simplersolution@gmail.com> a écrit:
>>
>> Hi
>>
>> Can you try booting the regular kernel? You should be able to do it this way:
>>
>> boot> /7.5/amd64/bsd
>>
>> If it makes it past the stage where the install kernel fails, it'll
>> panic at the lack of root, which is expected.
>>
>> Might be a pointless move but it might help eliminate the install
>> kernel as a variable.
>>
>> On Fri, May 24, 2024 at 10:30 PM Comète <comete@geekandfree.org> wrote:
>>
>> Thanks Sven,
>>
>> I can't install OpenBDS because I get the error when trying to boot the install image.
>>
>> Comete
>>
>> 24 mai 2024 07:48 "Sven Wolf" <mailinglist@fusion-zone.net> a écrit:
>>
>> Hi,
>>
>> I had a silimar issue on a Lenovo V130.
>> For this machine I needed to remove the amdgpu driver in the kernel.
>>
>> See also:
>> https://marc.info/?l=openbsd-misc&m=160232897421774&w=2
>> https://marc.info/?l=openbsd-tech&m=160383074317608&w=2
>>
>> Do you get the error "entry point at 0x1001000" also with the bsd.rd kernel or only after you
>> installed the system with the bsd.mp/bsd.sp kernel?
>>
>> Best regards,
>> Sven
>>
>> On 5/23/24 22:40, Comète wrote:
>>
>> Hello,
>> I tried to install OpenBSD 7.5 on a new HP Elitebook 840 G10 (UEFI capable only) without success.
>> It is stuck at boot on "entry point at 0x1001000".
>> Even retried after a BIOS upgrade but no luck either.
>> I tried with a snapshot install too with the same result.
>> I post here what lspci returns from a debian bookworm:
>> 00:00.0 Host bridge: Intel Corporation Device a706
>> 00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-P [Iris Xe Graphics] (rev 04)
>> 00:04.0 Signal processing controller: Intel Corporation Raptor Lake Dynamic Platform and Thermal
>> Framework Processor Participant
>> 00:06.0 PCI bridge: Intel Corporation Raptor Lake PCIe 4.0 Graphics Port
>> 00:06.2 PCI bridge: Intel Corporation Device a73d
>> 00:07.0 PCI bridge: Intel Corporation Raptor Lake-P Thunderbolt 4 PCI Express Root Port
>> 00:07.2 PCI bridge: Intel Corporation Raptor Lake-P Thunderbolt 4 PCI Express Root Port
>> 00:08.0 System peripheral: Intel Corporation GNA Scoring Accelerator module
>> 00:0a.0 Signal processing controller: Intel Corporation Raptor Lake Crashlog and Telemetry (rev 01)
>> 00:0d.0 USB controller: Intel Corporation Raptor Lake-P Thunderbolt 4 USB Controller
>> 00:0d.2 USB controller: Intel Corporation Raptor Lake-P Thunderbolt 4 NHI
>> 00:0d.3 USB controller: Intel Corporation Raptor Lake-P Thunderbolt 4 NHI
>> 00:14.0 USB controller: Intel Corporation Alder Lake PCH USB 3.2 xHCI Host Controller (rev 01)
>> 00:14.2 RAM memory: Intel Corporation Alder Lake PCH Shared SRAM (rev 01)
>> 00:14.3 Network controller: Intel Corporation Raptor Lake PCH CNVi WiFi (rev 01)
>> 00:15.0 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #0 (rev
>> 01)
>> 00:16.0 Communication controller: Intel Corporation Alder Lake PCH HECI Controller (rev 01)
>> 00:16.3 Serial controller: Intel Corporation Alder Lake AMT SOL Redirection (rev 01)
>> 00:1c.0 PCI bridge: Intel Corporation Alder Lake PCH-P PCI Express Root Port #9 (rev 01)
>> 00:1e.0 Communication controller: Intel Corporation Alder Lake PCH UART #0 (rev 01)
>> 00:1e.2 Serial bus controller: Intel Corporation Alder Lake SPI Controller (rev 01)
>> 00:1f.0 ISA bridge: Intel Corporation Raptor Lake LPC/eSPI Controller (rev 01)
>> 00:1f.3 Multimedia audio controller: Intel Corporation Raptor Lake-P/U/H cAVS (rev 01)
>> 00:1f.4 SMBus: Intel Corporation Alder Lake PCH-P SMBus Host Controller (rev 01)
>> 00:1f.5 Serial bus controller: Intel Corporation Alder Lake-P PCH SPI Controller (rev 01)
>> 02:00.0 Non-Volatile memory controller: SK hynix BC901 NVMe Solid State Drive (DRAM-less) (rev 03)
>> 57:00.0 Wireless controller [0d40]: Intel Corporation XMM7560 LTE Advanced Pro Modem (rev 01)
>> Thanks for your help.
>> Comete
>>
>> --
>> Aaron Mason - Programmer, open source addict
>> I've taken my software vows - for beta or for worse
No comments:
Post a Comment