Protectli V1410

Just got one today and installed it without any issue so far :)

I thought I'd share some info.

Console redirection worked without a problem (coreboot too).
Installation went fine on eMMC via a USB key.

I didn't test routing yet but direct iperf3 gave ~940Mbps on igc(4) and ~510Mbps on wg(4)
with basic pf enabled.

hw.machine=amd64  hw.model=Intel(R) Celeron(R) N5105 @ 2.00GHz  hw.ncpu=4  hw.byteorder=1234  hw.pagesize=4096  hw.disknames=sd0:936706d0bb7f9fd4  hw.diskcount=1  hw.sensors.cpu0.temp0=29.00 degC  hw.sensors.cpu0.frequency0=2850000000.00 Hz  hw.sensors.cpu1.frequency0=2900000000.00 Hz  hw.sensors.cpu2.frequency0=2850000000.00 Hz  hw.sensors.cpu3.frequency0=2850000000.00 Hz  hw.cpuspeed=2001  hw.setperf=100  hw.vendor=Protectli  hw.product=V1410  hw.version=1.0  hw.serialno=123456789  hw.physmem=8415326208  hw.usermem=8415232000  hw.ncpufound=4  hw.allowpowerdown=1  hw.perfpolicy=auto  hw.smt=0  hw.ncpuonline=4  hw.power=1  hw.ucomnames=    OpenBSD 7.6 (GENERIC.MP) #0: Thu Jan  9 07:32:40 MST 2025      root@syspatch-76-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP  real mem = 8415326208 (8025MB)  avail mem = 8137003008 (7760MB)  random: good seed from bootblocks  mpath0 at root  scsibus0 at mpath0: 256 targets  mainbus0 at root  bios0 at mainbus0: SMBIOS rev. 3.3 @ 0x78333000 (24 entries)  bios0: vendor 3mdeb version "Dasharo (coreboot+UEFI) v0.9.3" date 09/06/2024  bios0: Protectli V1410  efi0 at bios0: UEFI 2.8  efi0: EDK II rev 0x10000  acpi0 at bios0: ACPI 6.0  acpi0: sleep states S0 S3 S4 S5  acpi0: tables DSDT FACP SSDT MCFG TPM2 LPIT APIC SPCR DMAR HPET  acpi0: wakeup devices XHCI(S3) GLAN(S4)  acpitimer0 at acpi0: 3579545 Hz, 24 bits  acpimcfg0 at acpi0  acpimcfg0: addr 0xc0000000, bus 0-255  acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat  cpu0 at mainbus0: apid 0 (boot processor)  cpu0: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2793.96 MHz, 06-9c-00, patch 24000026  cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=47f8ebbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND>  cpu0: cpuid 6 eax=110077<SENSOR,ARAT> ecx=9<EFFFREQ>  cpu0: cpuid 7.0 ebx=2394a2c3<FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA> ecx=18400124<UMIP,WAITPKG> edx=fc000400<MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>  cpu0: cpuid a vers=5, gp=4, gpwidth=48, ff=3, ffwidth=48  cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>  cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=101<LAHF,3DNOWP>  cpu0: cpuid 80000007 edx=100<ITSC>  cpu0: msr 10a=14020c6b<IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,GDS_NO,RFDS_CLEAR>  cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line 12-way L2 cache, 4MB 64b/line 16-way L3 cache  cpu0: smt 0, core 0, package 0  mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges  cpu0: apic clock running at 38MHz  cpu0: mwait min=64, max=64, C-substates=0.2.0.2.2.1.1.1, IBE  cpu1 at mainbus0: apid 2 (application processor)  cpu1: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2793.96 MHz, 06-9c-00, patch 24000026  cpu1: smt 0, core 1, package 0  cpu2 at mainbus0: apid 4 (application processor)  cpu2: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2793.96 MHz, 06-9c-00, patch 24000026  cpu2: smt 0, core 2, package 0  cpu3 at mainbus0: apid 6 (application processor)  cpu3: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2793.95 MHz, 06-9c-00, patch 24000026  cpu3: smt 0, core 3, package 0  ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins  acpihpet0 at acpi0: 19200000 Hz  acpiprt0 at acpi0: bus 0 (PCI0)  acpiprt1 at acpi0: bus 1 (RP01)  acpiprt2 at acpi0: bus 2 (RP02)  acpiprt3 at acpi0: bus -1 (RP03)  acpiprt4 at acpi0: bus -1 (RP04)  acpiprt5 at acpi0: bus -1 (RP05)  acpiprt6 at acpi0: bus 3 (RP06)  acpiprt7 at acpi0: bus 4 (RP07)  acpiprt8 at acpi0: bus -1 (RP08)  acpiprt9 at acpi0: bus -1 (RP09)  acpiprt10 at acpi0: bus -1 (RP10)  acpiprt11 at acpi0: bus -1 (RP11)  acpiprt12 at acpi0: bus -1 (RP12)  acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001  "INT34C8" at acpi0 not configured  acpicmos0 at acpi0  "INTC1026" at acpi0 not configured  intelpmc0 at acpi0: PEPD  state 0: 0x7f:1:2:0x00:0x0000000000000060  counter: 0x7f:64:0:0x00:0x0000000000000632  frequency: 0  state 1: 0x7f:1:2:0x00:0x0000000000000060  counter: 0x00:32:0:0x03:0x00000000fe00193c  frequency: 0  tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 rev 0x0  acpicpu0 at acpi0: C3(200@253 mwait.1@0x33), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS  acpicpu1 at acpi0: C3(200@253 mwait.1@0x33), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS  acpicpu2 at acpi0: C3(200@253 mwait.1@0x33), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS  acpicpu3 at acpi0: C3(200@253 mwait.1@0x33), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS  "BOOT0000" at acpi0 not configured  cpu0: using VERW MDS workaround  cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2001, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz  pci0 at mainbus0 bus 0  pchb0 at pci0 dev 0 function 0 "Intel Jasper Lake Host" rev 0x00  inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x01  drm0 at inteldrm0  inteldrm0: msi, JASPERLAKE, gen 11  xhci0 at pci0 dev 20 function 0 "Intel Jasper Lake xHCI" rev 0x01: msi, xHCI 1.10  usb0 at xhci0: USB revision 3.0  uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1  "Intel Jasper Lake Shared SRAM" rev 0x01 at pci0 dev 20 function 2 not configured  "Intel Jasper Lake HECI" rev 0x01 at pci0 dev 22 function 0 not configured  sdhc0 at pci0 dev 26 function 0 "Intel Jasper Lake eMMC" rev 0x01: apic 2 int 16  sdhc0: SDHC 3.00, 200 MHz base clock  sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma  ppb0 at pci0 dev 28 function 0 "Intel Jasper Lake PCIE" rev 0x01: msi  pci1 at ppb0 bus 1  igc0 at pci1 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address 64:62:66:2f:12:7a  ppb1 at pci0 dev 28 function 1 "Intel Jasper Lake PCIE" rev 0x01: msi  pci2 at ppb1 bus 2  igc1 at pci2 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address 64:62:66:2f:12:7b  ppb2 at pci0 dev 28 function 5 "Intel Jasper Lake PCIE" rev 0x01: msi  pci3 at ppb2 bus 3  igc2 at pci3 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address 64:62:66:2f:12:7c  ppb3 at pci0 dev 28 function 6 "Intel Jasper Lake PCIE" rev 0x01: msi  pci4 at ppb3 bus 4  igc3 at pci4 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address 64:62:66:2f:12:7d  pcib0 at pci0 dev 31 function 0 "Intel Jasper Lake eSPI" rev 0x01  azalia0 at pci0 dev 31 function 3 "Intel Jasper Lake HD Audio" rev 0x01: msi  azalia0: no supported codecs  ichiic0 at pci0 dev 31 function 4 "Intel Jasper Lake SMBus" rev 0x01: apic 2 int 16  iic0 at ichiic0  "Intel Jasper Lake SPI" rev 0x01 at pci0 dev 31 function 5 not configured  isa0 at pcib0  isadma0 at isa0  com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo  com0: console  pcppi0 at isa0 port 0x61  spkr0 at pcppi0  vmm0 at mainbus0: VMX/EPT  efifb at mainbus0 not configured  scsibus1 at sdmmc0: 2 targets, initiator 0  sd0 at scsibus1 targ 1 lun 0: <Samsung, BJTD4R, 0000> removable  sd0: 29820MB, 512 bytes/sector, 61071360 sectors  uhub1 at uhub0 port 5 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/0.50 addr 2  uhub2 at uhub0 port 10 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub" rev 3.10/0.50 addr 3  vscsi0 at root  scsibus2 at vscsi0: 256 targets  softraid0 at root  scsibus3 at softraid0: 256 targets  root on sd0a (936706d0bb7f9fd4.a) swap on sd0b dump on sd0b  inteldrm0: 1024x768, 32bpp  wsdisplay0 at inteldrm0 mux 1  wsdisplay0: screen 0-5 added (std, vt100 emulation)