Hello,
If I do a "boot –c" and "disable acpimadt" the machine does no more do lot
of interrupts.
But I miss lot of hardwares (2 cpu instead of 4, no mouse, …)
Otherwise, I've tried to remove lot of CPU performance parameters in the
Bios settings, but this has no effects.
I've tried to disable HW elements like wifi, bluethoot, … But this has no
effect on the number of interrupts.
I've tried to disable Virtualization Feature, but no effect neither.
Is there any commands I can use to better pin-point to root cause of the
problem ?
rgds
On Tue, Feb 27, 2018 at 7:24 PM, vincent delft <vincent.delft@gmail.com>
wrote:
> Hello,
>
> I've just installed current on my new dell e5450, but encounter some
> troubles.
>
> 1 of the 4 display CPU in Top is heating 50% for interrupts.
>
> Concerning the installation process I did, I just followed the normal
> process by booting bsd.rd and performing a standard install by getting
> files from internet.
> So, at the reboot he installed automatically some firmwares: iwm, uvideo
> and vmm.
>
> I've removed those firmwares via pkg_delete, but the problem remains.
>
> on Bios level, I've not performed changes.
> Before booting, I've checked that "legacy" was activated, since it was,
> I've leave it as it is.
>
>
> Any ideas ?
>
> something I should de-activate ?
>
>
> Vincent
>
> ps:
> except that, I have 2 small problems:
> 1. the brightness button which does not work. xbacklight neither, but
> xrandr --brightness work well :-).
>
> 2. After a lid close (suspend), when I open it, the machine try to start,
> the screen appears very shortly but goes back in "sleeping". Pressing the
> power button make the system coming back to normal where it was.
> I see in dmesg message like: "acpivideo0: unknown event 0x00" when I close
> or open the lid.
> using the "moon" button does not create such problem. The suspend and
> resume work perfectly.
>
>
>
>
>
>
>
>
>
>
> TOP:
> ------
>
> load averages: 0.03, 0.02, 0.00 e5450.home.lan 18:39:24
> 28 processes: 27 idle, 1 on processor up 0:02
> CPU0 states: 0.2% user, 0.0% nice, 0.5% system, 60.5% interrupt, 38.9%
> idle
> CPU1 states: 1.3% user, 0.0% nice, 1.2% system, 0.0% interrupt, 97.5%
> idle
> CPU2 states: 1.9% user, 0.0% nice, 0.7% system, 0.0% interrupt, 97.4%
> idle
> CPU3 states: 0.2% user, 0.0% nice, 1.4% system, 0.0% interrupt, 98.3%
> idle
> Memory: Real: 20M/391M act/tot Free: 7431M Cache: 283M Swap: 0K/4220M
>
> PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
> 1 root 10 0 384K 428K idle wait 0:01 0.00% init
> 8886 vi 18 0 684K 796K sleep/2 pause 0:00 0.00% ksh
> 76946 _smtpq 2 0 1476K 3680K idle kqread 0:00 0.00% smtpd
> 14499 _smtpd 2 0 1392K 3640K idle kqread 0:00 0.00% smtpd
> 36195 root 2 0 1528K 2244K idle kqread 0:00 0.00% smtpd
> 33739 _smtpd 2 0 1472K 3704K idle kqread 0:00 0.00% smtpd
> 98349 _smtpd 2 0 1264K 3460K idle kqread 0:00 0.00% smtpd
> 19311 root 2 0 880K 1376K idle select 0:00 0.00% sshd
> 30693 _smtpd 2 0 1348K 3552K idle kqread 0:00 0.00% smtpd
> 30697 _smtpd 2 0 1264K 3512K idle kqread 0:00 0.00% smtpd
> 21077 _ntp 2 0 700K 2364K sleep/2 poll 0:00 0.00% ntpd
> 98937 root 3 0 312K 1252K idle ttyin 0:00 0.00% getty
> 52645 root 3 0 312K 1256K idle ttyin 0:00 0.00% getty
> 80044 root 3 0 316K 1252K idle ttyin 0:00 0.00% getty
> 38165 _pflogd 4 0 712K 532K sleep/2 bpf 0:00 0.00% pflogd
> 48738 _ntp 2 -20 756K 2448K sleep/2 poll 0:00 0.00% ntpd
> 23159 root 2 0 684K 616K idle kqread 0:00 0.00% slaacd
> 77351 _syslogd 2 0 932K 1616K sleep/3 kqread 0:00 0.00% syslogd
>
> dmesg
> --------
>
> OpenBSD 6.2-current (GENERIC.MP) #11: Mon Feb 26 19:16:54 MST 2018
> deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8456654848 <(845)%20665-4848> (8064MB)
> avail mem = 8193343488 <(819)%20334-3488> (7813MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xed750 (89 entries)
> bios0: vendor Dell Inc. version "A11" date 11/18/2015
> bios0: Dell Inc. Latitude E5450
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT UEFI SSDT ASF! SSDT
> SSDT SSDT SSDT PCCT SSDT SSDT SSDT SLIC MSDM DMAR
> acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4)
> PEG2(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4)
> RP04(S4) PXSX(S4) RP05(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2694.16 MHz
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
> V,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,
> SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG
> ,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,
> DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,
> LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,
> SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> acpitimer0: recalibrated TSC frequency 2294695314 <(229)%20469-5314> Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2693.77 MHz
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
> V,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,
> SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG
> ,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,
> DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,
> LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,
> SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 1 (application processor)
> cpu2: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2693.77 MHz
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
> V,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,
> SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG
> ,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,
> DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,
> LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,
> SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 1, core 0, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2693.77 MHz
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
> V,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,
> SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG
> ,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,
> DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,
> LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,
> SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpimadt0: bogus nmi for apid 0
> acpimadt0: bogus nmi for apid 2
> acpimadt0: bogus nmi for apid 1
> acpimadt0: bogus nmi for apid 3
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpihpet0: recalibrated TSC frequency 2294657156 <(229)%20465-7156> Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG0)
> acpiprt2 at acpi0: bus -1 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2)
> acpiprt4 at acpi0: bus 1 (RP01)
> acpiprt5 at acpi0: bus -1 (RP02)
> acpiprt6 at acpi0: bus -1 (RP03)
> acpiprt7 at acpi0: bus 2 (RP04)
> acpiprt8 at acpi0: bus 3 (RP05)
> acpiprt9 at acpi0: bus -1 (RP06)
> acpiprt10 at acpi0: bus -1 (RP07)
> acpiprt11 at acpi0: bus -1 (RP08)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PG00, resource for PEG0
> acpipwrres1 at acpi0: PG01, resource for PEG1
> acpipwrres2 at acpi0: PG02, resource for PEG2
> acpitz0 at acpi0: critical temperature is 107 degC
> acpipwrres3 at acpi0: FN00, resource for FAN0
> acpipwrres4 at acpi0: FN01, resource for FAN1
> acpipwrres5 at acpi0: FN02, resource for FAN2
> acpipwrres6 at acpi0: FN03, resource for FAN3
> acpipwrres7 at acpi0: FN04, resource for FAN4
> acpitz1 at acpi0: critical temperature is 105 degC
> acpitz2 at acpi0: critical temperature is 105 degC
> "INT3F0D" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "DLLK062B" at acpi0 not configured
> "DLL062B" at acpi0 not configured
> "SMO8810" at acpi0 not configured
> "INT3402" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PBTN
> acpibtn2 at acpi0: SBTN
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "DELL R9XM95C" serial 1144 type LiP oem
> "Sanyo"
> "DELLABCE" at acpi0 not configured
> "INT340F" at acpi0 not configured
> "INT3400" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: LCD_
> cpu0: Enhanced SpeedStep 2694 MHz: speeds: 2301, 2300, 2200, 2000, 1900,
> 1800, 1700, 1500, 1400, 1300, 1100, 1000, 900, 800, 600, 500 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1920x1080, 32bpp
> error: [drm:pid0:intel_dp_link_training_clock_recovery] *ERROR* too many
> full retries, give up
> Unclaimed register detected before reading register 0x64040
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
> "Intel Core 5G Thermal" rev 0x09 at pci0 dev 4 function 0 not configured
> xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address
> f8:ca:b8:50:84:15
> azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
> azalia1: codecs: Realtek/0x0293
> audio0 at azalia1
> ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
> pci1 at ppb0 bus 1
> sdhc0 at pci1 dev 0 function 0 vendor "O2 Micro", unknown product 0x8520
> rev 0x01: apic 2 int 16
> sdhc0: SDHC 4.0, 50 MHz base clock
> sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
> ppb1 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
> pci2 at ppb1 bus 2
> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59,
> msi
> ppb2 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi
> pci3 at ppb2 bus 3
> ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int
> 21
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI
> 1.3
> ahci0: port 1: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 1 lun 0: <ATA, INTENSO SSD 128G, O021> SCSI3 0/direct
> fixed naa.0000000000000000
> sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2
> int 18
> iic0 at ichiic0
> iic0: addr 0x29 07=ff 0f=33 10=08 11=90 12=07 13=51 14=b3 15=21 16=22
> 17=22 18=27 19=99 1a=70 1b=64 1c=c0 1e=20 20=7f 22=40 27=ff 2b=03 2d=44
> 2f=20 30=95 31=25 32=0e 33=16 87=ff 8f=33 90=08 91=90 92=07 93=51 94=b3
> 95=21 96=22 97=22 98=27 99=99 9a=70 9b=64 9c=c0 9e=20 a0=7f a2=40 a7=ff
> a9=00 ab=03 ad=44 af=20 b0=95 b1=25 b2=0e b3=16 words 00=0000 01=0000
> 02=0000 03=0000 04=0000 05=0000 06=0000 07=ffff
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> umass0 at uhub0 port 13 configuration 1 interface 0 "vendor 0x13fe USB
> DISK 3.0" rev 3.00/1.10 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <, USB DISK 3.0, PMAP> SCSI4 0/direct
> removable serial.13fe52005636A00C8300
> sd1: 30169MB, 512 bytes/sector, 61787904 sectors
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.03 addr 2
> ugen0 at uhub2 port 3 "Intel Bluetooth" rev 2.01/0.01 addr 3
> uvideo0 at uhub2 port 6 configuration 1 interface 0 "SunplusIT Inc
> Integrated_Webcam_HD" rev 2.00/46.16 addr 4
> video0 at uvideo0
> ugen1 at uhub2 port 7 "Broadcom Corp 5880" rev 1.10/1.01 addr 5
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd1a (c9cbb68f7eb028ab.a) swap on sd1b dump on sd1b
> iwm0: hw rev 0x210, fw ver 16.242414.0, address 10:02:b5:4e:1c:1d
>
>
>
> pcidump
> ----------
>
> Domain /dev/pci0:
> 0:0:0: Intel Core 5G Host
> 0:2:0: Intel HD Graphics 5500
> 0:3:0: Intel Core 5G HD Audio
> 0:4:0: Intel Core 5G Thermal
> 0:20:0: Intel 9 Series xHCI
> 0:22:0: Intel 9 Series MEI
> 0:25:0: Intel I218-LM
> 0:27:0: Intel 9 Series HD Audio
> 0:28:0: Intel 9 Series PCIE
> 0:28:3: Intel 9 Series PCIE
> 0:28:4: Intel 9 Series PCIE
> 0:29:0: Intel 9 Series USB
> 0:31:0: Intel 9 Series LPC
> 0:31:2: Intel 9 Series AHCI
> 0:31:3: Intel 9 Series SMBus
> 1:0:0: O2 Micro unknown
> 2:0:0: Intel Dual Band Wireless AC 7265
>
>
No comments:
Post a Comment