OpenBSD 6.3-current (GENERIC.MP) #52: Wed May 30 13:42:02 MDT 2018
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16811323392 (16032MB)
avail mem = 16293675008 (15538MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xeb460 (106 entries)
bios0: vendor Dell Inc. version "1.12.3" date 12/11/2016
bios0: Dell Inc. Latitude E7470
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT LPIT SSDT SSDT SSDT DBGP DBG2 SSDT UEFI SSDT SSDT MSDM SLIC TCPA DMAR ASF!
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2095.86 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
using xsaveopt
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2095.11 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2095.11 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz, 2095.11 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus -1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus 1 (RP05)
acpiprt14 at acpi0: bus 2 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP14)
acpiprt22 at acpi0: bus -1 (RP15)
acpiprt23 at acpi0: bus -1 (RP16)
acpiec0 at acpi0
acpiec at acpi0 not configured
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 107 degC
acpicmos0 at acpi0
"INT3F0D" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"DLLK06DC" at acpi0 not configured
"DLL06DC" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT33A1" at acpi0 not configured
tpm0 at acpi0: TPM_ addr 0xfed40000/0x1000: WEC WPCT200 rev 0x2
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL NJJ2H72" serial 49293 type LION oem "LGC-LGC3.65"
"DELLABC6" at acpi0 not configured
"DELLABCE" at acpi0 not configured
"INT340E" at acpi0 not configured
"INT3400" at acpi0 not configured
"INT3420" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2501, 2500, 2200, 2100, 2000, 1900, 1700, 1600, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored)
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: port 2: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 2 lun 0: <ATA, Micron 1100 SATA, M0D> SCSI3 0/direct fixed naa.500a075115dc1509
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
iwm0 at pci1 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x3a, msi
ppb1 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
vendor "Intel", unknown product 0x093c (class network subclass miscellaneous, rev 0x3a) at pci2 dev 0 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0293, Intel/0x2809, using Realtek/0x0293
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address d4:81:d7:a3:c1:4b
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
WARNING !wm_changed failed at /usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
uhub1 at uhub0 port 5 configuration 1 interface 0 "SMSC USB2134" rev 2.10/41.03 addr 2
uhub2 at uhub1 port 1 configuration 1 interface 0 "Dell USB 2.0 Hub [MTT]" rev 2.00/32.98 addr 3
uhidev0 at uhub2 port 4 configuration 1 interface 0 "Dell Dell Wired Multimedia Keyboard" rev 1.10/0.06 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 4 configuration 1 interface 1 "Dell Dell Wired Multimedia Keyboard" rev 1.10/0.06 addr 4
uhidev1: iclass 3/1, 5 report ids
ums0 at uhidev1 reportid 1: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
uhidev2 at uhub1 port 2 configuration 1 interface 0 "Primax Electronics DELL Laser Mouse" rev 2.00/7.17 addr 5
uhidev2: iclass 3/1
ums1 at uhidev2: 5 buttons, Z dir
wsmouse2 at ums1 mux 0
uhub3 at uhub0 port 6 configuration 1 interface 0 "Dell product 0x2513" rev 2.00/0.05 addr 6
ugen0 at uhub0 port 7 "Broadcom Corp 5880" rev 1.10/1.01 addr 7
uhub4 at uhub0 port 14 configuration 1 interface 0 "SMSC USB5534" rev 3.00/41.03 addr 8
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (4fb7869c3d80531f.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x200, fw ver 16.242414.0, address b8:08:cf:5e:8e:f4
error: [drm:pid47136:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe B
error: [drm:pid38604:check_wm_state] *ERROR* mismatch in DDB state pipe A plane 1 (expected (0,860), found (0,438))
error: [drm:pid38604:check_wm_state] *ERROR* mismatch in DDB state pipe A cursor (expected (860,892), found (438,446))
WARNING !wm_changed failed at /usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
WARNING !wm_changed failed at /usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
On 25 May 17:22 Marco van Hulten wrote:
> On 25 May 13:50 Marco van Hulten wrote:
> > I have a Dell Latitude E7470 with the latest OpenBSD snapshot. It
> > boots fine when not connected to a docking station. When I connect
> > it to a DELL E-Port II (Model No: PR03X) docking station, it
> > crashes with the following kernel error:
> >
> > error: [drm:pid8048:i915_gem_init_hw] *ERROR* Failed to initialize
> > GuC, error -9 (ignored) error:
> > [drm:pid73911:intel_dp_link_training_clock_recovery] *ERROR* too
> > many full retries, give up error:
> > [drm:pid73911:intel_dp_aux_wait_done] *ERROR* dp aux hw did not
> > signal timeout (has irq: 1)! error:
> > [drm:pid73911:intel_dp_set_idle_link_train] *ERROR* Timed out
> > waiting for DP idle patterns
>
> This specific issue appears to have disappeared (for now). I'm typing
> this on the laptop, running OpenBSD, with the docking station
> attached.
During the last boot, just after fs check, I got this:
kernel: double fault trap, code=0
Stopped at Xsyscall+0x3: movq %r15,%gs:0x8
ddb{0}>
The system was unresponsive. Next boot, it came up (writing this
e-mail on the system, dmesg attached), but the console log shows issues:
error: [drm:pid47136:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe B
error: [drm:pid38604:check_wm_state] *ERROR* mismatch in DDB state pipe A plane 1 (expected (0,860), found (0,438))
error: [drm:pid38604:check_wm_state] *ERROR* mismatch in DDB state pipe A cursor (expected (860,892), found (438,446))
WARNING !wm_changed failed at /usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
WARNING !wm_changed failed at /usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
Possibly, only the first one sits close to the hardware (I don't know).
The other four messages sugges interaction with the window manager
(current spectrwm package).
Marco
No comments:
Post a Comment