On Mon, 17 Sep 2018, Anthony J. Bentley wrote:
> Hi,
>
> The sigrok project aims at creating a portable, cross-platform,
> Free/Libre/Open-Source logic analyzer software that supports various
> logic analyzer hardware products.
>
> It includes command-line and graphical interfaces, libraries for
> protocol decoding and talking to logic analyzers, and free firmware
> for certain pieces of hardware.
>
>
> I haven't tried with any hardware. But the sigrok-dumps package
> provides sample data captures from various devices that you can
> play around with in Pulseview.
>
> ok?
Hi,
Tried sigrok-cli pulling data out of a Brymen BM257s via usb-to-serial.
works fine.
Also tried one of the cheap chinese USB logic analyzers (based on the
fx2lafw driver).
Pulseview recognizes it, you can configure and everything, but capture
hangs the program randomly.
All I can see is:
sr: fx2lafw: Failed to submit transfer: LIBUSB_ERROR_TIMEOUT.
I've been able to capture some data (testing with a simple arduino
serial). But never been able to decode it.
Timing seems all wrong. 1M samples at 1Mhz should capture 1s worth of
data, but it goes all over the place capturing "indefinitely", well
until it hangs.
I can make more tests and provide more data if needed.
Cheers,
Paco.
OpenBSD 6.4-beta (GENERIC.MP) #336: Sat Sep 29 08:13:15 MDT 2018
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16567697408 (15800MB)
avail mem = 16056315904 (15312MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x67493000 (88 entries)
bios0: vendor American Megatrends Inc. version "F4" date 09/04/2015
bios0: Gigabyte Technology Co., Ltd. Z170N-WIFI-CF
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT SSDT UEFI LPIT SSDT SSDT SSDT DBGP DBG2 SSDT SSDT BGRT DMAR ASF!
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PS2K(S3) PS2M(S3) PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, 3601.33 MHz, 06-5e-03
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, 3500.01 MHz, 06-5e-03
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, 3400.01 MHz, 06-5e-03
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, 3300.01 MHz, 06-5e-03
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 5 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus 6 (RP13)
acpiprt9 at acpi0: bus 2 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus 3 (RP05)
acpiprt14 at acpi0: bus 4 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus 1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP14)
acpiprt22 at acpi0: bus -1 (RP15)
acpiprt23 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpipwrres23 at acpi0: FN00, resource for FAN0
acpipwrres24 at acpi0: FN01, resource for FAN1
acpipwrres25 at acpi0: FN02, resource for FAN2
acpipwrres26 at acpi0: FN03, resource for FAN3
acpipwrres27 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpitz1 at acpi0: critical temperature is 119 degC
acpicmos0 at acpi0
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 3601 MHz: speeds: 3201, 3200, 3000, 2900, 2700, 2500, 2300, 2200, 2000, 1800, 1700, 1500, 1300, 1100, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored)
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
ahci0: PHY offline on port 4
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, CT250BX100SSD1, MU02> SCSI3 0/direct fixed naa.500a0751f00c333a
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
ppb0 at pci0 dev 27 function 0 "Intel 100 Series PCIE" rev 0xf1
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 40:8d:5c:51:8d:b8
ppb3 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
iwm0 at pci4 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x3a, msi
ppb4 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci5 at ppb4 bus 5
ppb5 at pci0 dev 29 function 4 "Intel 100 Series PCIE" rev 0xf1
pci6 at ppb5 bus 6
pcib0 at pci0 dev 31 function 0 "Intel Z170 LPC" rev 0x31
"Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x31: msi
azalia0: codecs: Realtek ALC1150, Intel/0x2809, using Realtek ALC1150
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31: apic 2 int 16
iic0 at ichiic0
em1 at pci0 dev 31 function 6 "Intel I219-V" rev 0x31: msi, address 40:8d:5c:51:8d:ba
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub1 at uhub0 port 3 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/77.63 addr 2
uhidev0 at uhub1 port 1 configuration 1 interface 0 "OCT KVMLite" rev 2.00/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 3 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/30.00 addr 4
uhidev1: iclass 3/1
ums0 at uhidev1: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub1 port 3 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/30.00 addr 4
uhidev2: iclass 3/0, 17 report ids
uhid0 at uhidev2 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev2 reportid 17: input=19, output=19, feature=0
uhidev3 at uhub1 port 4 configuration 1 interface 0 "Holtek USB Keyboard" rev 1.10/1.14 addr 5
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub1 port 4 configuration 1 interface 1 "Holtek USB Keyboard" rev 1.10/1.14 addr 5
uhidev4: iclass 3/0
uhid3 at uhidev4: input=64, output=64, feature=0
uhidev5 at uhub1 port 4 configuration 1 interface 2 "Holtek USB Keyboard" rev 1.10/1.14 addr 5
uhidev5: iclass 3/0, 4 report ids
uhid4 at uhidev5 reportid 1: input=1, output=0, feature=0
uhid5 at uhidev5 reportid 2: input=4, output=0, feature=0
ums1 at uhidev5 reportid 3: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
ukbd2 at uhidev5 reportid 4: no usable key codes array
uhub2 at uhub0 port 5 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.01 addr 6
ugen0 at uhub0 port 8 "Intel Bluetooth" rev 2.00/0.01 addr 7
umass0 at uhub0 port 9 configuration 1 interface 0 "Generic USB Storage" rev 2.00/2.20 addr 8
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 0220> SCSI0 0/direct removable
uhub3 at uhub0 port 21 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub" rev 3.00/90.01 addr 9
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (b502e6aff3c9449a.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x200, fw ver 16.242414.0, address a4:34:d9:01:23:7c
ugen1 at uhub2 port 4 "vendor 0x0925 product 0x3881" rev 2.00/0.01 addr 10
ugen1 detached
ugen1 at uhub2 port 4 "sigrok fx2lafw" rev 2.00/0.01 addr 10
--
Paco Esteban
https://onna.be/gpgkey.asc
No comments:
Post a Comment