Owain Ainsworth-2 wrote
>> - "ifconfig lii0" returns:
>> lii0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>> lladdr
> <correct MAC address>
>> priority: 0
>> media: Ethernet autoselect (none)
>> status: no carrier
>> inet6 ....
>
> Did you up the interface?
>
> ifconfig lii0 up
>
> -0-
> --
> I've seen better heads on half a pint of beer.
Having this exact same issue with EeePC 701 and OpenBSD 5.9. It uses the
lii0 driver. So far no luck with DHCP.
dmesg says about the driver,
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0 apic 1 int
17, address 00:1f:c6:d5:3c:80
ifconfig lii0 says,
lii0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1f:c6:d5:3c:80
priority: 0
media: Ethernet none
ifconfig lii0 up says nothing, same with ifconfig lii0 up scan
doing ifconfig lii0 nwid iPhone wpakey mypassword gives me an error,
ifconfig: SIOCS80211NWID: Inappropriate ioctl for device
ifconfig: SIOCS80211NWID: Inappropriate ioctl for device
doing dhclient lii0 says,
DHCPDISCOVER on lii0 - interval 3
DHCPDISCOVER on lii0 - interval 4
DHCPDISCOVER on lii0 - interval 7
DHCPDISCOVER on lii0 - interval 11
DHCPDISCOVER on lii0 - interval 14
DHCPDISCOVER on lii0 - interval 14
No acceptable DHCPOFFERS received.
doing wpa_supplicant -i lii0 -c my_wpa_configuration_file says,
lii0: CTRL-EVENT-SCAN-FAILED ret=1 retry=1
lii0: CTRL-EVENT-SCAN-FAILED ret=1 retry=1
lii0: CTRL-EVENT-SCAN-FAILED ret=1 retry=1
lii0: CTRL-EVENT-SCAN-FAILED ret=1 retry=1
lii0: CTRL-EVENT-SCAN-FAILED ret=1 retry=1
lii0: CTRL-EVENT-SCAN-FAILED ret=1 retry=1
lii0: CTRL-EVENT-SCAN-FAILED ret=1 retry=1
I'm not sure if this is a bug or not, ref.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=833507
--
Sent from: http://openbsd-archive.7691.n7.nabble.com/openbsd-user-misc-f3.html
No comments:
Post a Comment