Re: umsm: sparc64

Hereby attached the new multiprocessor kernel with umsm working ok.

The error message appears for each connection made to cuaU. This might
potentially populate dmesg logs over time.

Error message:
umsm0: this device is not using CDC notify message in intr pipe.
Please send your dmesg to <bugs@openbsd.org>, thanks.
umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0:

Kihaguru.

www# dmesg
console is /pci@83,4000/isa@7/su@0,3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org

OpenBSD 6.5 (WWW.MP) #0: Thu Jul 4 08:43:43 EAT 2019
kihaguru@www.datastore.ke:/usr/src/sys/arch/sparc64/compile/WWW.MP
real mem = 17179869184 (16384MB)
avail mem = 16862576640 (16081MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V
cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz
cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K
external (64 b/l)
cpu1 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz
cpu1: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K
external (64 b/l)
psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map fe000000-ffffffff, STC0 enabled
pci0 at psycho0
ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
"FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001,
270000-28ffff ivec 0x23 not configured
"FJSV,flashprom" at ebus0 addr 0-3fffff not configured
clock1 at ebus0 addr 250000-251fff: mk48t59
"FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured
ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address
00:0b:5d:f3:a7:5c
nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0
mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec 0xe0
mpi0: 0, firmware 1.0.12.0
scsibus1 at mpi0: 16 targets, initiator 7
sym0 at scsibus1 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR
sd0: 70007MB, 512 bytes/sector, 143374738 sectors
sym1 at scsibus1 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL
sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL
sd1: 70007MB, 512 bytes/sector, 143374738 sectors
mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using ivec 0xe4 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
0xe9, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub"
rev 1.00/1.00 addr 1
psycho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign c0
psycho1: bus range 128-128, PCI bus 128
psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled
pci1 at psycho1
bge0 at pci1 dev 1 function 0 "Fujitsu PRIMEPOWER250/450 LAN" rev
0x02, BCM5702/5703 A2 (0x1002): ivec 0xc0, address 00:0b:5d:f4:27:5c
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
"counter-timer" at mainbus0 addr 0xfff8bc00 not configured
umsm0 at uhub0 port 1 configuration 1 interface 0 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
ucom0 at umsm0
umsm1 at uhub0 port 1 configuration 1 interface 1 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
ucom1 at umsm1
umsm2 at uhub0 port 1 configuration 1 interface 2 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
ucom2 at umsm2
umass0 at uhub0 port 1 configuration 1 interface 3 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
cd1 at scsibus3 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2
5/cdrom removable
umass1 at uhub0 port 1 configuration 1 interface 4 "HUAWEI HUAWEI
Mobile" rev 2.00/1.02 addr 2
umass1: using SCSI over Bulk-Only
scsibus4 at umass1: 2 targets, initiator 0
sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2
0/direct removable
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
scsibus6bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0
root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b
umsm0: this device is not using CDC notify message in intr pipe.
Please send your dmesg to <bugs@openbsd.org>, thanks.
umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
www#




On 7/3/19, Kihaguru Gathura <pqscript@gmail.com> wrote:
>> Try adding umsm to /sys/arch/sparc64/conf/GENERIC and build a new kernel.
>> If it works ok, report back, maybe we can add it to the standard kernel.
>
> Have added umsm to GENERIC and built a new kernel => modem works as
> desired at cuaU0 -s 115200.
>
> Next will build a multiprocessor kernel using GENERIC.MP and continue
> testing and using the modem.
>
> However error messages noted at dmesg (umsm0: this device is not using
> CDC notify message in intr pipe.)
>
> Thank you,
>
> Kihaguru.
>
> +++++++++++++++++++++++++++++++++++++++++++++++++
> console is /pci@83,4000/isa@7/su@0,3f8
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2019 OpenBSD. All rights reserved.
> https://www.OpenBSD.org
>
> OpenBSD 6.5 (WWW) #0: Wed Jul 3 13:36:10 EAT 2019
> root@www.datastore.ke:/usr/src/sys/arch/sparc64/compile/WWW
> real mem = 17179869184 (16384MB)
> avail mem = 16862699520 (16081MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V
> cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz
> cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K
> external (64 b/l)
> "FJSV,SPARC64-V" at mainbus0 not configured
> psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign c0
> psycho0: bus range 0-0, PCI bus 0
> psycho0: dvma map fe000000-ffffffff, STC0 enabled
> pci0 at psycho0
> ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
> "FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001,
> 270000-28ffff ivec 0x23 not configured
> "FJSV,flashprom" at ebus0 addr 0-3fffff not configured
> clock1 at ebus0 addr 250000-251fff: mk48t59
> "FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured
> ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
> com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
> com0: console
> com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
> hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address
> 00:0b:5d:f3:a7:5c
> nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0
> mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec 0xe0
> mpi0: 0, firmware 1.0.12.0
> scsibus1 at mpi0: 16 targets, initiator 7
> sym0 at scsibus1 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR
> sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR
> sd0: 70007MB, 512 bytes/sector, 143374738 sectors
> sym1 at scsibus1 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL
> sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL
> sd1: 70007MB, 512 bytes/sector, 143374738 sectors
> mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
> DMA, channel 0 configured to native-PCI, channel 1 configured to
> native-PCI
> pciide0: using ivec 0xe4 for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus2 at atapiscsi0: 2 targets
> cd0 at scsibus2 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
> 0xe9, version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub"
> rev 1.00/1.00 addr 1
> psycbrgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
> timer0 at mainbus0 addr 0xfff8bc00 ivec 0xec, 0xed
> umsm0 at uhub0 port 1 configuration 1 interface 0 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> ucom0 at umsm0
> umsm1 at uhub0 port 1 configuration 1 interface 1 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> ucom1 at umsm1
> umsm2 at uhub0 port 1 configuration 1 interface 2 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> ucom2 at umsm2
> umass0 at uhub0 port 1 configuration 1 interface 3 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus3 at umass0: 2 targets, initiator 0
> cd1 at scsibus3 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2
> 5/cdrom removable
> umass1 at uhub0 port 1 configuration 1 interface 4 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> umass1: using SCSI over Bulk-Only
> scsibus4 at umass1: 2 targets, initiator 0
> sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2
> 0/direct removable
> vscsi0 at root
> scsibus5 at vscsi0: 256 targets
> softraid0 at root
> scsibus6 at softraid0: 256 targets
> bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0
> root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> ho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign c0
> psycho1: bus range 128-128, PCI bus 128
> psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled
> pci1 at psycho1
> sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2
> 0/direct removable
> vscsi0 at root
> scsibus5 at vscsi0: 256 targets
> softraid0 at root
> scsibus6 at softraid0: 256 targets
> bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0
> root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <bugs@openbsd.org>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
>