Re: relayd: "listen on egress" only listens to IPv4 and not IPv6

try

listen on 2a03:6000:9106::50f7:f07a:d1cc port 443 tls

and see if that works

On Thu, 29 Aug 2019 at 13:37, Muhammad Kaisar Arkhan <hi@yukiisbo.red>
wrote:

> > can you run
> > ifconfig interfacename
> > route -n show
>
> % ifconfig vio0
>
> vio0:
> flags=408b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,INET6_NOSOII>
> mtu 1500
> lladdr xx:xx:xx:xx:xx:xx
> index 1 priority 0 llprio 3
> groups: egress
> media: Ethernet autoselect
> status: active
> inet 46.23.92.126 netmask 0xffffff00 broadcast 46.23.92.255
> inet6 fe80::fce1:bbff:fed3:5b04%vio0 prefixlen 64 scopeid 0x1
> inet6 2a03:6000:9106::50f7:f07a:d1cc prefixlen 64
>
> % route -n show
>
> Routing tables
>
> Internet:
> Destination Gateway Flags Refs Use Mtu Prio
> Iface
> default 46.23.92.1 UGS 23 66128822 - 8
> vio0
> ...
>
> Internet6:
> Destination Gateway Flags
> Refs Use Mtu Prio Iface
> default 2a03:6000:9106::1 UGS
> 0 21655 - 8 vio0
> ...
>
>
> Thanks.
>


--
Kindest regards,
Tom Smyth.