> On Fri, Sep 27, 2019 at 08:01:53PM -0400, Joe Gidi wrote:
>> Hello,
>>
>> I've seen a number of recent commits for the rk3288 SoC, so I dug out my
>> Tinker Board and tried to install the latest snapshot (miniroot dated
>> 27-Sep-2019 06:14).
>>
>> I followed the updated directions for this chip:
>>
>> For systems based on Rockchip RK3288 SoCs:
>>
>> dd if=/usr/local/share/u-boot/board/idbloader.img \
>> of=/dev/sdXc seek=64
>> dd if=/usr/local/share/u-boot/board/u-boot.img \
>> of=/dev/sdXc seek=16384
>>
>> Unfortunately, when I try to boot, I get:
>>
>> rying to boot from BOOTROM
>> Returning to boot ROM...
>>
>> U-Boot SPL 2019.07 (Sep 25 2019 - 20:12:08 -0600)
>> Trying to boot from MMC1
>> spl: mmc init failed with error: -110
>> SPL: failed to boot from all boot devices
>> ### ERROR ### Please RESET the board ###
>>
>> Is this currently known to be broken, or am I doing something wrong?
>
> tinker-rk3288 was broken in U-Boot 2019.07. I have just committed an
> update to U-Boot 2019.10-rc4 which corrects this. Either build
> u-boot-arm from ports or wait till updated packages appear.
Following up to confirm that the updated U-Boot works. I was able to
install and run the latest snap with no issues. Thanks!
--
Joe Gidi
joe@entropicblur.com
"You cannot buy skill." -- Ross Seyfried
No comments:
Post a Comment