Re: Incoming connection via VLAN

On 2019-09-01, Felix Hanley <felix@userspace.com.au> wrote:
> I had assumed I would be able to use the existing pf.conf (which has worked for years) even after the introduction of the
> vlan2 interface as the pppoe0 parent. To get anything to work I had to remove all queueing references.
>
> BTW, I am running 6.5:
>
> # uname -a
> OpenBSD malkmus.xx.xx 6.5 GENERIC.MP#3 amd64
>
> Thank you for any suggestions to try.
>
> -felix
>
>

Note that queues should be done on the *physical* interface, i.e. the
ethernet interface that is the parent of the vlan that is the parent of
the pppoe.