On Thu, Oct 31, 2019 at 01:41:55PM -0400, Patrick Coppock wrote:
> Hi, All:
>
> I am new to OpenBSD; I recently installed 6.5 on a Dell Inspiron 6000
> and upgraded to 6.6 yesterday. Suspend did not work in 6.5 and still
> doesn't in 6.6.
>
> What is the best way for me to go about debugging this issue? So far,
> I have checked:
> - dmesg for ACPI wake devices
> - syslog for suspend messages
>
> Specifically, the suspend works; however, when I attempt to wake the
> device, the laptop seems to respond and attempt to wake, but the
> display never turns on, and I cannot SSH into the machine. Below are
> the dmesg and relevant syslog entries.
>
About a year or so ago I posted a message to either misc@ or tech@ about
how to diagnose suspend/resume failures, by bisecting the resume path and
placing resets or spins at various places to see how far the resume gets
before dying. I would recommend finding that post (I just looked and I
couldn't find it though) and walking through those steps.
I doubt any of us still have machines that old to try debugging this
ourselves, the machine is nearly 15 years old.
-ml
> dmesg
> =====
>
> OpenBSD 6.6 (GENERIC) #0: Sat Oct 26 05:57:51 MDT 2019
> root@syspatch-66-i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> real mem = 527790080 (503MB)
> avail mem = 502480896 (479MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 09/28/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf80e0 (44 entries)
> bios0: vendor Dell Inc. version "A09" date 09/28/2005
> bios0: Dell Inc. Inspiron 6000
> acpi0 at bios0: ACPI 1.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG BOOT SSDT SSDT
> acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) USB0(S0) USB1(S0) USB2(S0) USB4(S0) USB3(S0) MODM(S3) PCIE(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Celeron(R) M processor 1.30GHz ("GenuineIntel" 686-class) 1.30 GHz, 06-0d-06
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF,MELTDOWN
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpimcfg0: addr 0x0, bus 0-0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 3 (PCIE)
> acpicpu0 at acpi0: !C3(250@85 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1 halt)
> acpitz0 at acpi0: critical temperature is 99 degC
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "DELL F51336" serial 1988 type LION oem "Sanyo"
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: PBTN
> acpibtn2 at acpi0: SBTN
> "PNP0A03" at acpi0 not configured
> acpicmos0 at acpi0
> acpivideo0 at acpi0: VID_
> acpivideo1 at acpi0: VID_
> acpivideo2 at acpi0: VID2
> bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
> inteldrm0 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
> drm0 at inteldrm0
> intagp0 at inteldrm0
> agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> inteldrm0: apic 1 int 16
> "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> pci1 at ppb0 bus 3
> bce0 at pci1 dev 0 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int 18, address 00:11:43:70:7f:12
> bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
> cbb0 at pci1 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xb3: apic 1 int 19
> "Ricoh 5C552 Firewire" rev 0x08 at pci1 dev 1 function 1 not configured
> sdhc0 at pci1 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x17: apic 1 int 17
> sdhc0: SDHC 1.0, 33 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
> bwi0 at pci1 dev 3 function 0 "Broadcom BCM4306" rev 0x03: apic 1 int 17, address 00:0b:7d:15:3a:24
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20
> pcmcia0 at cardslot0
> auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int 16, ICH6
> ac97: codec id 0x83847652 (SigmaTel STAC9752/53)
> ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
> audio0 at auich0
> "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK3021GAS>
> wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <SAMSUNG, CDRW/DVD SN-324S, U303> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: ALPS Glidepoint, version 0x7321
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> umass0 at uhub0 port 7 configuration 1 interface 0 "SanDisk Ultra Fit" rev 2.10/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd0 at scsibus2 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable serial.07815583160829112091
> sd0: 14664MB, 512 bytes/sector, 30031872 sectors
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on wd0a (cc890b5cad21430f.a) swap on wd0b dump on wd0b
> inteldrm0: 1280x800, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> ugen0 at uhub0 port 5 "TCT Holding Ltd. TCT Modem" rev 2.00/0.00 addr 3
> ugen0: setting configuration index 0 failed
> ugen0 detached
>
> messages
> ========
>
> Oct 16 11:13:23 bilbo apmd: system suspending
> Oct 16 11:13:23 bilbo apmd: battery status: high. external power status: connected. estimated battery life 100%
> Oct 16 11:13:24 bilbo /bsd: uhub1 detached
> Oct 16 11:13:24 bilbo /bsd: uhub2 detached
> Oct 16 11:13:24 bilbo /bsd: uhub3 detached
> Oct 16 11:20:42 bilbo syslogd[3039]: start
>
No comments:
Post a Comment