Hi again,
I'm sorry, but since the boxes do not (yet) have working networking it is
not easy for me to get the text output.
I'm attaching a few pictures with the requested output.
https://picpaste.me/images/2019/12/03/cat_hostname.vl3800_hostname.aggr0.jpg
https://picpaste.me/images/2019/12/03/ifconfig_vl3800.jpg
https://picpaste.me/images/2019/12/03/ifconfig_aggr0.jpg
Best regards,
Pedro Caetano
On Tue, Dec 3, 2019 at 12:35 PM Hrvoje Popovski <hrvoje@srce.hr> wrote:
> On 3.12.2019. 13:15, Pedro Caetano wrote:
> > Hi Hrvoje, thank you for the fast reply,
> >
> > Unfortunately I have the same behavior.
> > The aggr0 works as expected, as I can see the links bonded on the switch.
> > I'm able to se the correct vid s, when tcpdump'ing the aggr0 interface.
> >
> > I'd appreciate any help on this topic.
> >
>
> can you send ifconfig aggr0 and ifconfig vlan3800 ?
>
>
>
>
> > This configuration is working on -current with em(4) nics.
> >
> >
> > Best regards,
> > Pedro Caetano
> >
> > A terça, 3/12/2019, 12:01, Hrvoje Popovski <hrvoje@srce.hr
> > <mailto:hrvoje@srce.hr>> escreveu:
> >
> > On 3.12.2019. 12:21, Pedro Caetano wrote:
> > > Hi misc@
> > >
> > > I'm running openbsd 6.6 with latest patches running on a pair of
> > hp dl 360
> > > gen6 servers.
> > >
> > > I'm attempting to configure an aggr0 device towards a cat 3650.
> > >
> > > The aggr0 associates successfully with the switch, but I'm unable
> > to run
> > > vlans on top of it.
> > >
> > > The configuration on openbsd is the following:
> > > #ifconfig aggr0 create
> > > #ifconfig aggr0 trunkport bnx0
> > > #ifconfig aggr0 trunkport bnx1
> >
> > add this - ifconfig aggr0 up
> > if you have hostname.aggr0 add "up" at the end of that file ...
> >
> > > #ifconfig vlan3800 create
> > > #ifconfig vlan3800 vnetid 3800
> > > #ifconfig vlan3800 parent aggr0
> > > #ifconfig vlan3800 10.80.253.10/24 <http://10.80.253.10/24>
> > > ifconfig: SIOCAIFADDR: No buffer space available.
> >
>
>
No comments:
Post a Comment