Re: issues configuring vlan on top of aggr device

On 3.12.2019. 13:15, Pedro Caetano wrote:
> Hi Hrvoje, thank you for the fast reply,
>
> Unfortunately I have the same behavior.
> The aggr0 works as expected, as I can see the links bonded on the switch.
> I'm able to se the correct vid s, when tcpdump'ing the aggr0 interface.
>
> I'd appreciate any help on this topic.
>

can you send ifconfig aggr0 and ifconfig vlan3800 ?




> This configuration is working on -current with em(4) nics.
>
>
> Best regards,
> Pedro Caetano
>
> A terça, 3/12/2019, 12:01, Hrvoje Popovski <hrvoje@srce.hr
> <mailto:hrvoje@srce.hr>> escreveu:
>
> On 3.12.2019. 12:21, Pedro Caetano wrote:
> > Hi misc@
> >
> > I'm running openbsd 6.6 with latest patches running on a pair of
> hp dl 360
> > gen6 servers.
> >
> > I'm attempting to configure an aggr0 device towards a cat 3650.
> >
> > The aggr0 associates successfully with the switch, but I'm unable
> to run
> > vlans on top of it.
> >
> > The configuration on openbsd is the following:
> > #ifconfig aggr0 create
> > #ifconfig aggr0 trunkport bnx0
> > #ifconfig aggr0 trunkport bnx1
>
> add this - ifconfig aggr0 up
> if you have hostname.aggr0 add "up" at the end of that file ...
>
> > #ifconfig vlan3800 create
> > #ifconfig vlan3800 vnetid 3800
> > #ifconfig vlan3800 parent aggr0
> > #ifconfig vlan3800 10.80.253.10/24 <http://10.80.253.10/24>
> > ifconfig: SIOCAIFADDR: No buffer space available.
>