The FAQ - Multimedia - Recording Audio Samples suggests the following
mixerctl(1) parameters:
inputs.mic.mute=off
inputs.mic.preamp=on
inputs.mic.source=mic0
record.source=mic
record.volume=255,255
record.volume.mute=off
record.mic=255
record.mic.mute=off
However, most of these parameters don't appear to be supported:
$ doas mixerctl inputs.mic.mute=off
mixerctl: field inputs.mic.mute does not exist
$ doas mixerctl inputs.mic.preamp=on
mixerctl: field inputs.mic.preamp does not exist
$ doas mixerctl inputs.mic.source=mic0
mixerctl: field inputs.mic.source does not exist
$ doas mixerctl record.source=mic
mixerctl: field record.source does not exist
$ doas mixerctl record.volume=255,255
record.volume: 255,255 -> 255,255
$ doas mixerctl record.mic.mute=off
mixerctl: field record.mic.mute does not exist
$ doas mixerctl record.mic=255
mixerctl: field record.mic does not exist
$ doas mixerctl record.mic.mute=off
mixerctl: field record.mic.mute does not exist
My current audio system mixing variables:
$ doas mixerctl
inputs.dac-0:1_mute=off
inputs.dac-0:1=222,222
inputs.dac-2:3_mute=off
inputs.dac-2:3=222,222
inputs.beep=108
record.adc-2:3_source=mic3
record.adc-2:3_mute=off
record.adc-2:3=240,240
record.adc-0:1_source=sel
record.adc-0:1_mute=off
record.adc-0:1=240,240
record.adc-4:5_source=sel
record.adc-4:5_mute=off
record.adc-4:5=240,240
inputs.sel_source=mic
outputs.sel=126,126
inputs.sel2_source=mic
outputs.sel2=126,126
outputs.hp_source=dac-0:1
outputs.hp_boost=off
outputs.mic_dir=input-vr80
outputs.mic2_source=dac-0:1
outputs.mic2_dir=input-vr80
outputs.mic2_eapd=on
outputs.hp2_source=dac-0:1
outputs.spkr_source=dac-2:3
inputs.mic3=126,126
inputs.mix_source=dac-0:1,dac-2:3
inputs.mix_dac-0:1=126,126
inputs.mix_dac-2:3=126,126
outputs.hp_sense=unplugged
outputs.mic_sense=unplugged
outputs.mic2_sense=unplugged
outputs.hp2_sense=unplugged
outputs.spkr_muters=hp,mic2,hp2
outputs.master=255,255
outputs.master.mute=off
outputs.master.slaves=dac-0:1,dac-2:3
record.volume=255,255
record.volume.mute=off
record.volume.slaves=adc-2:3,adc-0:1,adc-4:5
record.enable=sysctl
Am I missing something?
azalia(4) lists only the widget types and the form of the mixer item names.
Is there a complete list with explanations of mixer classes, widget types, and properties, something like sysctl(2)? In addition to mixerctl (1), I've searched audio(4), audio(9), audioctl(1), sndio(7), sndioctl(1), and /usr/include/sys/audioio.h. Not sure where else to look.
Thanks in advance,
Gail
OpenBSD 6.7-beta (GENERIC.MP) #149: Wed Apr 22 11:17:50 MDT 2020
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4156157952 (3963MB)
avail mem = 4017577984 (3831MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (65 entries)
bios0: vendor LENOVO version "8DET58WW (1.28 )" date 02/14/2012
bios0: LENOVO 4299HB4
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF!
TCPA SSDT SSDT UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4)
EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2492.25 MHz, 06-2a-07
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,
MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,
x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,
MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.92 MHz, 06-2a-07
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,
MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,
x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,
MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.92 MHz, 06-2a-07
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,
MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,
x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,
MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.92 MHz, 06-2a-07
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,
MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,
x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,
MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus -1 (EXP7)
acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "42T4881" serial 23489 type LION oem "LGC"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"IBM0079" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: GDCK docked (15)
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2492 MHz: speeds: 2501, 2500, 2200, 2000,
1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi, SANDYBRIDGE, gen 6
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports:
16 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
3c:97:0e:01:d3:57
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2
int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub"
rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04:
msi
azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev
0x34: msi, MIMO 2T2R, MoW, address 8c:70:5a:66:70:d0 ppb2 at pci0 dev
28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2
int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2
int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST500LM021-1KJ15, 0002>
naa.5000c5008a80503c
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04:
apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 0x194b40
0xd002a3 0x123800
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub3 at uhub2 port 1 configuration 1 interface 0 "Standard
Microsystems product 0x2514" rev 2.00/0.00 addr 3
uhub4 at uhub3 port 4 configuration 1 interface 0 "Genesys Logic
USB2.0 Hub" rev 2.00/32.98 addr 4
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Griffin
Technology, Inc. iMate, USB To ADB Adaptor" rev 1.00/3.70 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub4 port 2 configuration 1 interface 1 "Griffin
Technology, Inc. iMate, USB To ADB Adaptor" rev 1.00/3.70 addr 5
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse2 at ums0 mux 0
uhidev2 at uhub4 port 3 configuration 1 interface 0 "PixArt USB Optical
Mouse" rev 1.10/1.00 addr 6
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse3 at ums1 mux 0
uhub5 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhidev3 at uhub5 port 5 configuration 1 interface 0 "Tablet ISD-V4"
rev 1.10/1.39 addr 3
uhidev3: iclass 3/0, 17 report ids
ums2 at uhidev3 reportid 2: 3 buttons, tip, barrel, eraser
wsmouse4 at ums2 mux 0
uhid0 at uhidev3 reportid 17: input=7, output=0, feature=3
uhidev4 at uhub5 port 5 configuration 1 interface 1 "Tablet ISD-V4"
rev 1.10/1.39 addr 3
uhidev4: iclass 3/0, 16 report ids
uhid1 at uhidev4 reportid 2: input=0, output=0, feature=1
uhid2 at uhidev4 reportid 3: input=0, output=0, feature=3
uhid3 at uhidev4 reportid 5: input=0, output=0, feature=8
uhid4 at uhidev4 reportid 6: input=0, output=0, feature=8
ums3 at uhidev4 reportid 12: 1 button, tip
wsmouse5 at ums3 mux 0
uhid5 at uhidev4 reportid 13: input=13, output=0, feature=0
uhid6 at uhidev4 reportid 14: input=0, output=0, feature=2
ums4 at uhidev4 reportid 15: 2 buttons
wsmouse6 at ums4 mux 0
ums5 at uhidev4 reportid 16: 1 button, tip
wsmouse7 at ums5 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (2a548c9d8383d7d3.a) swap on sd0b dump on sd0b
inteldrm0: 1280x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using
wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
No comments:
Post a Comment