Ciao Luciano,
I am writing using the same notebook you have, an Acer Extensa 5635,
with 4GB Ram.
My Bios version is 1.3311 and OpenBSD version is 6.8.
Same behavior here: the wifi card works correctly only with one memory
card inserted (2GB); inserting the second memory card (2+2GB), the wifi
card stops to work.
The 'dmesg' output is almost the same of yours
(alc0: phy write timeout: phy 0, reg 30) and so on.
I confirm everything works correctly with debian (kernel 5.9).
My workaround is to use a TPLink mini usb wifi network card, that is
better than decrease the ram...
Ciao.
Il 12/20/20 8:08 PM, Isaia Luciano ha scritto:
> Hello,
>
> it would seam a OpenBSB problem, the other SO (Linux, FreeBSD) properly
> activate the interface.
>
>
> # sh /etc/netstart alc0
> alc0: writev(DHCPDISCOVER): No buffer space available
> alc0: writev(DHCPDISCOVER): No buffer space available
> alc0: writev(DHCPDISCOVER): No buffer space available
> alc0: no lease....alc0: writev(DHCPDISCOVER): No buffer space available
> .alc0: writev(DHCPDISCOVER): No buffer space available
> .alc0: writev(DHCPDISCOVER): No buffer space avialable
> .alc0: writev(DHCPDISCOVER): No buffer space available
> .alc0: writev(DHCPDISCOVER): No buffer space available
> .alc0: writev(DHCPDISCOVER): No buffer space available
> .alc0: writev(DHCPDISCOVER): No buffer space available
> sleeping
>
> # ifconfig alc0 down
> alc0: could not disable RxQ/TxQ (0xffffffff)!
> alc0: could not disable Rx/Tx MAC(0xffffffff)!
>
>
> I tried with live CD of Sistem Rescue CD and MidnighBSD.
> It has already happened to someone.
>
> Thanks.
>
> Luciano.
>
> Il 19/12/20 11:36, luisaia@tin.it ha scritto:
>> Hi,I have install OpenBSD 6.8 on Acer Laptop with 2GB of RAM.
>> I have upgrade the memory added a new 2 GB RAM bank.On boot the net
>> interface not running.The dmesg is:
>> OpenBSD 6.8 (GENERIC.MP) #98: Sun Oct 4 18:13:26 MDT 2020
>> deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> real mem = 4105977856 (3915MB)
>> avail mem = 3966488576 (3782MB)
>> random: good seed from bootblocks
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xb5ec0000 (33 entries)
>> bios0: vendor Phoenix version "V1.3311" date 12/21/2009
>> bios0: Acer Extensa 5635Z
>> acpi0 at bios0: ACPI 3.0
>> acpi0: sleep states S0 S3 S4 S5
>> acpi0: tables DSDT FACP HPET MCFG APIC BOOT SSDT SSDT SSDT SSDT
>> acpi0: wakeup devices USB0(S3) USB1(S3) USBR(S3) EHC1(S3) USB3(S3)
>> EHC2(S3) HDEF(S3) GLAN(S4)
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpihpet0 at acpi0: 14318179 Hz
>> acpimcfg0 at acpi0
>> acpimcfg0: addr 0xe0000000, bus 0-255
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 2095.34 MHz, 06-17-0a
>> cpu0:
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
>>
>> cpu0: 1MB 64b/line 4-way L2 cache
>> cpu0: smt 0, core 0, package 0
>> mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 199MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.2.2, IBE
>> cpu1 at mainbus0: apid 1 (application processor)
>> cpu1: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 2094.99 MHz, 06-17-0a
>> cpu1:
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
>>
>> cpu1: 1MB 64b/line 4-way L2 cache
>> cpu1: smt 0, core 1, package 0
>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 10 (P0P1)
>> acpiprt2 at acpi0: bus 2 (RP01)
>> acpiprt3 at acpi0: bus -1 (RP02)
>> acpiprt4 at acpi0: bus -1 (RP03)
>> acpiprt5 at acpi0: bus 7 (RP04)
>> acpiprt6 at acpi0: bus -1 (RP05)
>> acpiec0 at acpi0
>> acpiac0 at acpi0: AC unit online
>> acpibat0 at acpi0: BAT1 model "AS09C31" serial 9418 type LION oem "SANYO"
>> acpibtn0 at acpi0: LID_
>> acpibtn1 at acpi0: PWRB
>> acpibtn2 at acpi0: SLPB
>> "PNP0C14" at acpi0 not configured
>> acpipci0 at acpi0 PCI0
>> acpicmos0 at acpi0
>> "SYN1B20" at acpi0 not configured
>> "PNP0C14" at acpi0 not configured
>> acpicpu0 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
>> C1(1000@1 mwait.1), PSS
>> acpicpu1 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
>> C1(1000@1 mwait.1), PSS
>> acpitz0 at acpi0: critical temperature is 108 degC
>> acpivideo0 at acpi0: VGA_
>> acpivideo1 at acpi0: GFX0
>> acpivout0 at acpivideo1: DD02
>> cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2100, 1600, 1200 MHz
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
>> inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
>> drm0 at inteldrm0
>> intagp0 at inteldrm0
>> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
>> inteldrm0: apic 2 int 16, GM45, gen 4
>> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
>> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2
>> int 16
>> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2
>> int 21
>> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2
>> int 19
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
>> 2.00/1.00 addr 1
>> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
>> azalia0: codecs: Conexant CX20561
>> audio0 at azalia0
>> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
>> pci1 at ppb0 bus 2
>> ppb1 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
>> pci2 at ppb1 bus 7
>> athn0 at pci2 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 19
>> athn0: could not reset chip
>> ppb2 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
>> pci3 at ppb2 bus 9
>> alc0 at pci3 dev 0 function 0 "Attansic Technology L1C" rev 0xc0:
>> msialc0: phy write timeout: phy 0, reg 29
>> alc0: phy write timeout: phy 0, reg 30
>> alc0: phy write timeout: phy 0, reg 29
>> alc0: phy write timeout: phy 0, reg 30
>> alc0: phy write timeout: phy 0, reg 29
>> alc0: phy write timeout: phy 0, reg 30
>> alc0: phy write timeout: phy 0, reg 29
>> alc0: phy write timeout: phy 0, reg 30
>> alc0: phy write timeout: phy 0, reg 29
>> alc0: phy write timeout: phy 0, reg 30
>> alc0: phy write timeout: phy 0, reg 29
>> alc0: phy write timeout: phy 0, reg 30
>> alc0: phy write timeout: phy 0, reg 29
>> alc0: phy read timeout: phy 0, reg 30
>> alc0: phy write timeout: phy 0, reg 30
>> alc0: phy write timeout: phy 0, reg 29
>> alc0: phy read timeout: phy 0, reg 30
>> alc0: phy write timeout: phy 0, reg 30
>> alc0: could not disable RxQ/TxQ (0xffffffff)!
>> alc0: could not disable Rx/Tx MAC(0xffffffff)!
>> alc0: master reset timeout!
>> alc0: reset timeout(0xffffffff)!
>> alc0: reloading EEPROM timeout!
>> , address ff:ff:ff:ff:ff:ff
>> alc0: phy read timeout: phy 0, reg 1
>> alc0: no PHY found!
>> uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2
>> int 23
>> uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2
>> int 19
>> uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2
>> int 18
>> uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x03: apic 2
>> int 16
>> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2
>> int 23
>> usb1 at ehci1: USB revision 2.0
>> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
>> 2.00/1.00 addr 1
>> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
>> pci4 at ppb3 bus 10
>> pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
>> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi,
>> AHCI 1.2
>> ahci0: port 0: 3.0Gb/s
>> ahci0: port 1: 1.5Gb/s
>> ahci0: PHY offline on port 4
>> ahci0: PHY offline on port 5
>> scsibus1 at ahci0: 32 targets
>> sd0 at scsibus1 targ 0 lun 0: <ATA, CT120BX500SSD1, M6C>
>> naa.0000000000000000
>> sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
>> cd0 at scsibus1 targ 1 lun 0: <TSSTcorp, CDDVDW TS-L633C, AC01> removable
>> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic
>> 2 int 19
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
>> spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
>> usb2 at uhci0: USB revision 1.0
>> uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
>> 1.00/1.00 addr 1
>> usb3 at uhci1: USB revision 1.0
>> uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
>> 1.00/1.00 addr 1
>> usb4 at uhci2: USB revision 1.0
>> uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
>> 1.00/1.00 addr 1
>> usb5 at uhci3: USB revision 1.0
>> uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
>> 1.00/1.00 addr 1
>> usb6 at uhci4: USB revision 1.0
>> uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
>> 1.00/1.00 addr 1
>> usb7 at uhci5: USB revision 1.0
>> uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev
>> 1.00/1.00 addr 1
>> isa0 at pcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>> pckbd0 at pckbc0 (kbd slot)
>> wskbd0 at pckbd0: console keyboard
>> pms0 at pckbc0 (aux slot)
>> wsmouse0 at pms0 mux 0
>> pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa44000 0x0 0xd04731
>> 0xa0000
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> uvideo0 at uhub1 port 8 configuration 1 interface 0 "SuYin Video
>> WebCam" rev 2.00/5.00 addr 2
>> video0 at uvideo0
>> uhidev0 at uhub4 port 1 configuration 1 interface 0 "2.4G 2.4G
>> Wireless Device" rev 1.10/10.01 addr 2
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0: 8 variable keys, 6 key codes
>> wskbd1 at ukbd0 mux 1
>> uhidev1 at uhub4 port 1 configuration 1 interface 1 "2.4G 2.4G
>> Wireless Device" rev 1.10/10.01 addr 2
>> uhidev1: iclass 3/1, 186 report ids
>> ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
>> wsmouse1 at ums0 mux 0
>> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
>> uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
>> uhid2 at uhidev1 reportid 4: input=1, output=0, feature=0
>> uhid3 at uhidev1 reportid 186: input=31, output=31, feature=0
>> vscsi0 at root
>> scsibus2 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus3 at softraid0: 256 targets
>> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
>> sd1: 114470MB, 512 bytes/sector, 234435953 sectors
>> root on sd1a (fc79adbb28d62767.a) swap on sd1b dump on sd1b
>> inteldrm0: 1366x768, 32bpp
>> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using
>> wskbd0
>> wskbd1: connecting to wsdisplay0
>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>> alc0: could not disable RxQ/TxQ (0xffffffff)!
>> alc0: could not disable Rx/Tx MAC(0xffffffff)!
>> alc0: master reset timeout!
>> alc0: reset timeout(0xffffffff)!
>>
>> The net is not accessible.If I remove the bank the net is OK.
>>
>> Why?Any idea?
>> Thanks.
>> Luciano.
>
>
No comments:
Post a Comment