apu2 and Atheros WLE600VX not working

Hi guys,

I am running OpenBSD 6.9 the machine recognizes an earlier version of

the same wireless PCIe card, namely the WLE200NX but for some,

unknown to me reason, the WLE600VX is not recognized. I checked the

athn driver support for the chip set which should be AR9280 and it list it.

When I boot I get in dmesg:

"Atheros QCA986x/988x" rev 0x00 at pci1 dev 0 function 0 not configured

pcidump -v:

1:0:0: Atheros QCA986x/988x
  0x0000: Vendor ID: 168c, Product ID: 003c
  0x0004: Command: 0002, Status: 0010
  0x0008: Class: 02 Network, Subclass: 80 Miscellaneous,
    Interface: 00, Revision: 00
  0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
    Cache Line Size: 10
  0x0010: BAR mem 64bit addr: 0x00000000fe200000/0x00200000
  0x0018: BAR empty (00000000)
  0x001c: BAR empty (00000000)
  0x0020: BAR empty (00000000)
  0x0024: BAR empty (00000000)
  0x0028: Cardbus CIS: 00000000
  0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
  0x0030: Expansion ROM Base Address: fe400000
  0x0038: 00000000
  0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 00 Max Lat: 00
  0x0040: Capability 0x01: Power Management
    State: D0

  0x0050: Capability 0x05: Message Signalled Interrupts (MSI)
    Enabled: no
  0x0070: Capability 0x10: PCI Express
    Max Payload Size: 256 / 256 bytes
    Max Read Request Size: 512 bytes
    Link Speed: 2.5 / 2.5 GT/s
    Link Width: x1 / x1

fw_update:

Path to firmware: http://firmware.openbsd.org/firmware/6.9/
Installed: vmm-firmware-1.11.0p3
Installed, extra: athn-firmware-1.1p4

Does anyone have this WLE600VX card working on OpenBSD?

Thanks in advance,

Cheers,

George