Friendly ping.
On 5/27/21 1:27 AM, manphiz@gmail.com wrote:
> >Synopsis: lang/gcc/8 fails to build on loongson
> >Category: ports
> >Environment:
> System : OpenBSD 6.9
> Details : OpenBSD 6.9 (GENERIC) #78: Thu Apr 22 20:28:58 MDT 2021
>
> deraadt@loongson.openbsd.org:/usr/src/sys/arch/loongson/compile/GENERIC
>
> Architecture: OpenBSD.loongson
> Machine : loongson
> >Description:
> lang/gcc/8 fails to build on loongson
> >How-To-Repeat:
> Reproducible on loongson when building using dpb. Build log is
> attached.
> >Fix:
> No idea.
>
> dmesg:
> OpenBSD 6.9 (GENERIC) #78: Thu Apr 22 20:28:58 MDT 2021
>
> deraadt@loongson.openbsd.org:/usr/src/sys/arch/loongson/compile/GENERIC
> real mem = 1073741824 (1024MB)
> avail mem = 1052065792 (1003MB)
> random: boothowto does not indicate good seed
> mainbus0 at root: Lemote Yeeloong
> cpu0 at mainbus0: STC Loongson2F CPU 797 MHz, STC Loongson2F FPU
> cpu0: cache L1-I 64KB D 64KB 4 way, L2 512KB 4 way
> bonito0 at mainbus0: memory and PCI-X controller, rev 1
> pci0 at bonito0 bus 0
> rl0 at pci0 dev 7 function 0 "Realtek 8139" rev 0x10: irq 5, address
> 00:23:8b:33:d4:7f
> rlphy0 at rl0 phy 0: RTL internal PHY
> smfb0 at pci0 dev 8 function 0 "Silicon Motion LynxEM+" rev 0xb0:
> 1024x600, 16bpp
> wsdisplay0 at smfb0 mux 1: console (std, vt100 emulation)
> ohci0 at pci0 dev 9 function 0 "NEC USB" rev 0x44: irq 7, version 1.0
> ehci0 at pci0 dev 9 function 1 "NEC USB" rev 0x05: irq 7
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev
> 2.00/1.00 addr 1
> glxpcib0 at pci0 dev 14 function 0 "AMD CS5536 ISA" rev 0x03: rev 3,
> 32-bit 3579545Hz timer, watchdog, gpio, i2c
> isa0 at glxpcib0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> mcclock0 at isa0 port 0x70/2: mc146818 or compatible
> ykbec0 at isa0 port 0x381/3
> gpio1 at glxpcib0: 32 pins
> iic at glxpcib0 not configured
> glxclk0 at glxpcib0: clock, prof
> pciide0 at pci0 dev 14 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <FUJITSU MHZ2160BH G2>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> auglx0 at pci0 dev 14 function 3 "AMD CS5536 Audio" rev 0x01: isa irq 9,
> CS5536 AC97
> ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
> audio0 at auglx0
> ohci1 at pci0 dev 14 function 4 "AMD CS5536 USB" rev 0x02: isa irq 11,
> version 1.0, legacy support
> ehci1 at pci0 dev 14 function 5 "AMD CS5536 USB" rev 0x02: isa irq 11
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev
> 2.00/1.00 addr 1
> usb2 at ohci0: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev
> 1.00/1.00 addr 1
> usb3 at ohci1: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev
> 1.00/1.00 addr 1
> apm0 at mainbus0
> umass0 at uhub1 port 1 configuration 1 interface 0 "Generic USB2.0-CRW"
> rev 2.00/58.87 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <Generic-, Multi-Card, 1.00> removable
> serial.0bda0158114173400000
> urtw0 at uhub1 port 4 configuration 1 interface 0 "Realtek
> RTL8187B_WLAN_Adapter" rev 2.00/2.00 addr 3
> urtw0: RTL8187B rev E, address 00:17:c4:4d:ea:21
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> pmon bootpath: bootduid=b0c7a9c3d196767f
> root on wd0a (b0c7a9c3d196767f.a) swap on wd0b dump on wd0b
>
> usbdevs:
> Controller /dev/usb0:
> addr 01: 1033:0000 NEC, EHCI root hub
> high speed, self powered, config 1, rev 1.00
> driver: uhub0
> Controller /dev/usb1:
> addr 01: 1022:0000 AMD, EHCI root hub
> high speed, self powered, config 1, rev 1.00
> driver: uhub1
> addr 02: 0bda:0158 Generic, USB2.0-CRW
> high speed, power 500 mA, config 1, rev 58.87, iSerial
> 20071114173400000
> driver: umass0
> addr 03: 0bda:8189 Realtek, RTL8187B_WLAN_Adapter
> high speed, power 500 mA, config 1, rev 2.00, iSerial 00e04c000001
> driver: urtw0
> Controller /dev/usb2:
> addr 01: 1033:0000 NEC, OHCI root hub
> full speed, self powered, config 1, rev 1.00
> driver: uhub2
> Controller /dev/usb3:
> addr 01: 1022:0000 AMD, OHCI root hub
> full speed, self powered, config 1, rev 1.00
> driver: uhub3
No comments:
Post a Comment