On Sat, 31 Jul 2021 00:31:42 -0400
Brad Smith <brad@comstyle.com> wrote:
> On Thu, Jul 29, 2021 at 03:01:33PM -0400, Kurt Mosiejczuk wrote:
> > On Thu, Jul 29, 2021 at 02:46:57PM -0400, Bryan Steele wrote:
> >
> > > > > It would be nice to commit his diff below, or perhaps backout the 1.21.1
> > > > > update in ports until the bug can be fixed upstream..
> >
> > > > It fixes audio for me. ok kmos on using this diff.
> >
> > > ok brynet@ too.
> >
> > To be clear, I _prefer_ keeping the update with the diff since it has cured
> > the clipping I experienced all the time with minecraft (and sometimes with
> > other things). I just played for a few minutes during work time because I so
> > enjoyed the clipping being gone. :D
> >
> > --Kurt
>
> Can you guys try out the following diff?
>
> After bringing up the breakage upstream it looks like the author
> fixed whatever the root issue was.
Works for me. Sound is back in
- Blender with OpenAL output module
- Minecraft (1.12)
- ClassiCube (not in ports, uses dlopen("libopenal.so", RTLD_NOW); )
> Index: Makefile
> ===================================================================
> RCS file: /home/cvs/ports/audio/openal/Makefile,v
> retrieving revision 1.56
> diff -u -p -u -p -r1.56 Makefile
> --- Makefile 30 Jul 2021 12:47:53 -0000 1.56
> +++ Makefile 31 Jul 2021 03:50:08 -0000
> @@ -6,7 +6,7 @@ V = 1.21.1
> EPOCH = 0
> DISTNAME = openal-soft-$V
> PKGNAME = openal-$V
> -REVISION = 0
> +REVISION = 1
> CATEGORIES = audio
>
> SHARED_LIBS = openal 4.1
> Index: patches/patch-alc_backends_sndio_cpp
> ===================================================================
> RCS file: /home/cvs/ports/audio/openal/patches/patch-alc_backends_sndio_cpp,v
> retrieving revision 1.2
> diff -u -p -u -p -r1.2 patch-alc_backends_sndio_cpp
> --- patches/patch-alc_backends_sndio_cpp 31 Jul 2021 00:27:59 -0000 1.2
> +++ patches/patch-alc_backends_sndio_cpp 31 Jul 2021 04:02:08 -0000
> @@ -1,30 +1,45 @@
> $OpenBSD: patch-alc_backends_sndio_cpp,v 1.2 2021/07/31 00:27:59 brynet Exp $
>
> -Revert..
> +Simplify channel handling in the sndio backend
> +620836f173ae6fc4505d0634984e0f2c46166367
>
> -sndio: Support more than 2 channels
> -5cffe7e50a2885d9b392c15f2cd3941cac49692c
> +Use non-block mode for sndio capture
> +1fd4c865fc084f134363db5155361d5483679235
>
> -and
> -
> -Use a safer layout if sndio changes the channel count
> -b4a52321c4ad8e8bc0eb29d2cdae2c043fc405e1
> -
> -which break the backend.
>
> Index: alc/backends/sndio.cpp
> --- alc/backends/sndio.cpp.orig
> +++ alc/backends/sndio.cpp
> -@@ -57,7 +57,7 @@ struct SndioPlayback final : public BackendBase {
> +@@ -22,6 +22,7 @@
> +
> + #include "backends/sndio.h"
> +
> ++#include <poll.h>
> + #include <stdio.h>
> + #include <stdlib.h>
> + #include <string.h>
> +@@ -43,7 +44,12 @@ namespace {
> +
> + static const char sndio_device[] = "SndIO Default";
> +
> ++struct SioPar : public sio_par {
> ++ SioPar() { sio_initpar(this); }
> +
> ++ void clear() { sio_initpar(this); }
> ++};
> ++
> + struct SndioPlayback final : public BackendBase {
> + SndioPlayback(ALCdevice *device) noexcept : BackendBase{device} { }
> + ~SndioPlayback() override;
> +@@ -56,6 +62,7 @@ struct SndioPlayback final : public BackendBase {
> + void stop() override;
>
> sio_hdl *mSndHandle{nullptr};
> ++ uint mFrameStep{};
>
> -- al::vector<al::byte> mBuffer;
> -+ al::vector<ALubyte> mBuffer;
> + al::vector<al::byte> mBuffer;
>
> - std::atomic<bool> mKillNow{true};
> - std::thread mThread;
> -@@ -74,24 +74,16 @@ SndioPlayback::~SndioPlayback()
> +@@ -74,39 +81,29 @@ SndioPlayback::~SndioPlayback()
>
> int SndioPlayback::mixerProc()
> {
> @@ -35,106 +50,133 @@ Index: alc/backends/sndio.cpp
> - mDevice->handleDisconnect("Failed to get device parameters");
> - return 1;
> - }
> --
> ++ const size_t frameStep{mFrameStep};
> ++ const size_t frameSize{frameStep * mDevice->bytesFromFmt()};
> +
> - const size_t frameStep{par.pchan};
> - const size_t frameSize{frameStep * par.bps};
> -
> SetRTPriority();
> althrd_setname(MIXER_THREAD_NAME);
>
> -- while(!mKillNow.load(std::memory_order_acquire)
> -- && mDevice->Connected.load(std::memory_order_acquire))
> -+ const size_t frameStep{mDevice->channelsFromFmt()};
> -+ const uint frameSize{mDevice->frameSizeFromFmt()};
> -+
> -+ while(!mKillNow.load(std::memory_order_acquire) &&
> -+ mDevice->Connected.load(std::memory_order_acquire))
> + while(!mKillNow.load(std::memory_order_acquire)
> + && mDevice->Connected.load(std::memory_order_acquire))
> {
> - al::byte *WritePtr{mBuffer.data()};
> -+ ALubyte *WritePtr{mBuffer.data()};
> - size_t len{mBuffer.size()};
> +- size_t len{mBuffer.size()};
> ++ al::span<al::byte> buffer{mBuffer};
>
> - mDevice->renderSamples(WritePtr, static_cast<uint>(len/frameSize), frameStep);
> -@@ -135,47 +127,35 @@ bool SndioPlayback::reset()
> - sio_initpar(&par);
> +- mDevice->renderSamples(WritePtr, static_cast<uint>(len/frameSize), frameStep);
> +- while(len > 0 && !mKillNow.load(std::memory_order_acquire))
> ++ mDevice->renderSamples(buffer.data(), static_cast<uint>(buffer.size() / frameSize),
> ++ frameStep);
> ++ while(!buffer.empty() && !mKillNow.load(std::memory_order_acquire))
> + {
> +- size_t wrote{sio_write(mSndHandle, WritePtr, len)};
> ++ size_t wrote{sio_write(mSndHandle, buffer.data(), buffer.size())};
> + if(wrote == 0)
> + {
> + ERR("sio_write failed\n");
> + mDevice->handleDisconnect("Failed to write playback samples");
> + break;
> + }
> +-
> +- len -= wrote;
> +- WritePtr += wrote;
> ++ buffer = buffer.subspan(wrote);
> + }
> + }
>
> - par.rate = mDevice->Frequency;
> +@@ -131,26 +128,12 @@ void SndioPlayback::open(const char *name)
> +
> + bool SndioPlayback::reset()
> + {
> +- sio_par par;
> +- sio_initpar(&par);
> ++ SioPar par;
> +
> +- par.rate = mDevice->Frequency;
> - switch(mDevice->FmtChans)
> -- {
> ++ auto tryfmt = mDevice->FmtType;
> ++retry_params:
> ++ switch(tryfmt)
> + {
> - case DevFmtMono : par.pchan = 1; break;
> - case DevFmtQuad : par.pchan = 4; break;
> - case DevFmtX51Rear: // fall-through - "Similar to 5.1, except using rear channels instead of sides"
> - case DevFmtX51 : par.pchan = 6; break;
> - case DevFmtX61 : par.pchan = 7; break;
> - case DevFmtX71 : par.pchan = 8; break;
> -+ par.pchan = ((mDevice->FmtChans != DevFmtMono) ? 2 : 1);
> -
> +-
> - // fall back to stereo for Ambi3D
> - case DevFmtAmbi3D : // fall-through
> - case DevFmtStereo : par.pchan = 2; break;
> - }
> -
> - switch(mDevice->FmtType)
> - {
> -- case DevFmtByte:
> -- par.bits = 8;
> -- par.sig = 1;
> -- break;
> -- case DevFmtUByte:
> -- par.bits = 8;
> -- par.sig = 0;
> -- break;
> +- switch(mDevice->FmtType)
> +- {
> + case DevFmtByte:
> + par.bits = 8;
> + par.sig = 1;
> +@@ -159,7 +142,6 @@ bool SndioPlayback::reset()
> + par.bits = 8;
> + par.sig = 0;
> + break;
> - case DevFmtFloat:
> -- case DevFmtShort:
> -- par.bits = 16;
> -- par.sig = 1;
> -- break;
> -- case DevFmtUShort:
> -- par.bits = 16;
> -- par.sig = 0;
> -- break;
> -- case DevFmtInt:
> -- par.bits = 32;
> -- par.sig = 1;
> -- break;
> -- case DevFmtUInt:
> -- par.bits = 32;
> -- par.sig = 0;
> -- break;
> -+ case DevFmtByte:
> -+ par.bits = 8;
> -+ par.sig = 1;
> -+ break;
> -+ case DevFmtUByte:
> -+ par.bits = 8;
> -+ par.sig = 0;
> -+ break;
> -+ case DevFmtFloat:
> -+ case DevFmtShort:
> -+ par.bits = 16;
> -+ par.sig = 1;
> -+ break;
> -+ case DevFmtUShort:
> -+ par.bits = 16;
> -+ par.sig = 0;
> -+ break;
> -+ case DevFmtInt:
> -+ par.bits = 32;
> -+ par.sig = 1;
> -+ break;
> -+ case DevFmtUInt:
> -+ par.bits = 32;
> -+ par.sig = 0;
> -+ break;
> + case DevFmtShort:
> + par.bits = 16;
> + par.sig = 1;
> +@@ -168,6 +150,7 @@ bool SndioPlayback::reset()
> + par.bits = 16;
> + par.sig = 0;
> + break;
> ++ case DevFmtFloat:
> + case DevFmtInt:
> + par.bits = 32;
> + par.sig = 1;
> +@@ -177,70 +160,64 @@ bool SndioPlayback::reset()
> + par.sig = 0;
> + break;
> }
> ++ par.bps = SIO_BPS(par.bits);
> par.le = SIO_LE_NATIVE;
> ++ par.msb = 1;
>
> -@@ -202,28 +182,8 @@ bool SndioPlayback::reset()
> - }
> ++ par.rate = mDevice->Frequency;
> ++ par.pchan = mDevice->channelsFromFmt();
> ++
> + par.round = mDevice->UpdateSize;
> + par.appbufsz = mDevice->BufferSize - mDevice->UpdateSize;
> + if(!par.appbufsz) par.appbufsz = mDevice->UpdateSize;
>
> - mDevice->Frequency = par.rate;
> -+ mDevice->FmtChans = ((par.pchan==1) ? DevFmtMono : DevFmtStereo);
> +- if(!sio_setpar(mSndHandle, &par) || !sio_getpar(mSndHandle, &par))
> +- {
> +- ERR("Failed to set device parameters\n");
> +- return false;
> +- }
> ++ try {
> ++ if(!sio_setpar(mSndHandle, &par))
> ++ throw al::backend_exception{al::backend_error::DeviceError,
> ++ "Failed to set device parameters"};
>
> +- if(par.bits != par.bps*8)
> +- {
> +- ERR("Padded samples not supported (%u of %u bits)\n", par.bits, par.bps*8);
> +- return false;
> +- }
> +- if(par.le != SIO_LE_NATIVE)
> +- {
> +- ERR("Non-native-endian samples not supported (got %s-endian)\n",
> +- par.le ? "little" : "big");
> +- return false;
> +- }
> ++ par.clear();
> ++ if(!sio_getpar(mSndHandle, &par))
> ++ throw al::backend_exception{al::backend_error::DeviceError,
> ++ "Failed to get device parameters"};
> +
> +- mDevice->Frequency = par.rate;
> +-
> - if(par.pchan < 2)
> - {
> - if(mDevice->FmtChans != DevFmtMono)
> @@ -142,7 +184,16 @@ Index: alc/backends/sndio.cpp
> - WARN("Got %u channel for %s\n", par.pchan, DevFmtChannelsString(mDevice->FmtChans));
> - mDevice->FmtChans = DevFmtMono;
> - }
> -- }
> ++ if(par.bps > 1 && par.le != SIO_LE_NATIVE)
> ++ throw al::backend_exception{al::backend_error::DeviceError,
> ++ "%s-endian samples not supported", par.le ? "Little" : "Big"};
> ++ if(par.bits < par.bps*8 && !par.msb)
> ++ throw al::backend_exception{al::backend_error::DeviceError,
> ++ "MSB-padded samples not supported (%u of %u bits)", par.bits, par.bps*8};
> ++ if(par.pchan < 1)
> ++ throw al::backend_exception{al::backend_error::DeviceError,
> ++ "No playback channels on device"};
> + }
> - else if((par.pchan == 2 && mDevice->FmtChans != DevFmtStereo)
> - || par.pchan == 3
> - || (par.pchan == 4 && mDevice->FmtChans != DevFmtQuad)
> @@ -154,37 +205,249 @@ Index: alc/backends/sndio.cpp
> - {
> - WARN("Got %u channels for %s\n", par.pchan, DevFmtChannelsString(mDevice->FmtChans));
> - mDevice->FmtChans = DevFmtStereo;
> -- }
> --
> - if(par.bits == 8 && par.sig == 1)
> - mDevice->FmtType = DevFmtByte;
> - else if(par.bits == 8 && par.sig == 0)
> -@@ -247,15 +207,8 @@ bool SndioPlayback::reset()
> - mDevice->UpdateSize = par.round;
> - mDevice->BufferSize = par.bufsz + par.round;
> -
> -- mBuffer.resize(mDevice->UpdateSize * par.pchan*par.bps);
> -- if(par.sig == 1)
> -- std::fill(mBuffer.begin(), mBuffer.end(), al::byte{});
> -- else if(par.bits == 8)
> -- std::fill_n(mBuffer.data(), mBuffer.size(), al::byte(0x80));
> -- else if(par.bits == 16)
> -- std::fill_n(reinterpret_cast<uint16_t*>(mBuffer.data()), mBuffer.size()/2, 0x8000);
> -- else if(par.bits == 32)
> -- std::fill_n(reinterpret_cast<uint32_t*>(mBuffer.data()), mBuffer.size()/4, 0x80000000u);
> -+ mBuffer.resize(mDevice->UpdateSize * mDevice->frameSizeFromFmt());
> -+ std::fill(mBuffer.begin(), mBuffer.end(), 0);
> ++ catch(al::backend_exception &e) {
> ++ if(tryfmt == DevFmtShort)
> ++ throw;
> ++ par.clear();
> ++ tryfmt = DevFmtShort;
> ++ goto retry_params;
> + }
> +
> +- if(par.bits == 8 && par.sig == 1)
> +- mDevice->FmtType = DevFmtByte;
> +- else if(par.bits == 8 && par.sig == 0)
> +- mDevice->FmtType = DevFmtUByte;
> +- else if(par.bits == 16 && par.sig == 1)
> +- mDevice->FmtType = DevFmtShort;
> +- else if(par.bits == 16 && par.sig == 0)
> +- mDevice->FmtType = DevFmtUShort;
> +- else if(par.bits == 32 && par.sig == 1)
> +- mDevice->FmtType = DevFmtInt;
> +- else if(par.bits == 32 && par.sig == 0)
> +- mDevice->FmtType = DevFmtUInt;
> ++ if(par.bps == 1)
> ++ mDevice->FmtType = (par.sig==1) ? DevFmtByte : DevFmtUByte;
> ++ else if(par.bps == 2)
> ++ mDevice->FmtType = (par.sig==1) ? DevFmtShort : DevFmtUShort;
> ++ else if(par.bps == 4)
> ++ mDevice->FmtType = (par.sig==1) ? DevFmtInt : DevFmtUInt;
> + else
> ++ throw al::backend_exception{al::backend_error::DeviceError,
> ++ "Unhandled sample format: %s %u-bit", (par.sig?"signed":"unsigned"), par.bps*8};
> ++
> ++ mFrameStep = par.pchan;
> ++ if(par.pchan != mDevice->channelsFromFmt())
> + {
> +- ERR("Unhandled sample format: %s %u-bit\n", (par.sig?"signed":"unsigned"), par.bits);
> +- return false;
> ++ WARN("Got %u channel%s for %s\n", par.pchan, (par.pchan==1)?"":"s",
> ++ DevFmtChannelsString(mDevice->FmtChans));
> ++ if(par.pchan < 2) mDevice->FmtChans = DevFmtMono;
> ++ else mDevice->FmtChans = DevFmtStereo;
> + }
> ++ mDevice->Frequency = par.rate;
> +
> + setDefaultChannelOrder();
>
> - return true;
> +@@ -287,6 +264,11 @@ void SndioPlayback::stop()
> }
> -@@ -323,8 +276,8 @@ int SndioCapture::recordProc()
>
> - const uint frameSize{mDevice->frameSizeFromFmt()};
>
> -- while(!mKillNow.load(std::memory_order_acquire)
> -- && mDevice->Connected.load(std::memory_order_acquire))
> -+ while(!mKillNow.load(std::memory_order_acquire) &&
> -+ mDevice->Connected.load(std::memory_order_acquire))
> ++/* TODO: This could be improved by avoiding the ring buffer and record thread,
> ++ * counting the available samples with the sio_onmove callback and reading
> ++ * directly from the device. However, this depends on reasonable support for
> ++ * capture buffer sizes apps may request.
> ++ */
> + struct SndioCapture final : public BackendBase {
> + SndioCapture(ALCdevice *device) noexcept : BackendBase{device} { }
> + ~SndioCapture() override;
> +@@ -301,6 +283,7 @@ struct SndioCapture final : public BackendBase {
> +
> + sio_hdl *mSndHandle{nullptr};
> +
> ++ al::vector<struct pollfd> mFds;
> + RingBufferPtr mRing;
> +
> + std::atomic<bool> mKillNow{true};
> +@@ -326,37 +309,53 @@ int SndioCapture::recordProc()
> + while(!mKillNow.load(std::memory_order_acquire)
> + && mDevice->Connected.load(std::memory_order_acquire))
> {
> - auto data = mRing->getWriteVector();
> - size_t todo{data.first.len + data.second.len};
> +- auto data = mRing->getWriteVector();
> +- size_t todo{data.first.len + data.second.len};
> +- if(todo == 0)
> ++ /* Wait until there's some samples to read. */
> ++ const int nfds{sio_pollfd(mSndHandle, mFds.data(), POLLIN)};
> ++ if(nfds <= 0)
> + {
> +- static char junk[4096];
> +- sio_read(mSndHandle, junk,
> +- minz(sizeof(junk)/frameSize, mDevice->UpdateSize)*frameSize);
> ++ mDevice->handleDisconnect("Failed to get polling fds: %d", nfds);
> ++ break;
> ++ }
> ++ int pollres{::poll(mFds.data(), static_cast<uint>(nfds), 2000)};
> ++ if(pollres < 0)
> ++ {
> ++ if(errno == EINTR) continue;
> ++ mDevice->handleDisconnect("Poll error: %s", strerror(errno));
> ++ break;
> ++ }
> ++ if(pollres == 0)
> + continue;
> ++
> ++ const int revents{sio_revents(mSndHandle, mFds.data())};
> ++ if((revents&POLLHUP))
> ++ {
> ++ mDevice->handleDisconnect("Got POLLHUP from poll events");
> ++ break;
> + }
> ++ if(!(revents&POLLIN))
> ++ continue;
> +
> +- size_t total{0u};
> +- data.first.len *= frameSize;
> +- data.second.len *= frameSize;
> +- todo = minz(todo, mDevice->UpdateSize) * frameSize;
> +- while(total < todo)
> ++ auto data = mRing->getWriteVector();
> ++ al::span<al::byte> buffer{data.first.buf, data.first.len*frameSize};
> ++ while(!buffer.empty())
> + {
> +- if(!data.first.len)
> +- data.first = data.second;
> ++ size_t got{sio_read(mSndHandle, buffer.data(), buffer.size())};
> ++ if(got == 0) break;
> +
> +- size_t got{sio_read(mSndHandle, data.first.buf, minz(todo-total, data.first.len))};
> +- if(!got)
> ++ mRing->writeAdvance(got / frameSize);
> ++ buffer = buffer.subspan(got);
> ++ if(buffer.empty())
> + {
> +- mDevice->handleDisconnect("Failed to read capture samples");
> +- break;
> ++ data = mRing->getWriteVector();
> ++ buffer = {data.first.buf, data.first.len*frameSize};
> + }
> +-
> +- data.first.buf += got;
> +- data.first.len -= got;
> +- total += got;
> + }
> +- mRing->writeAdvance(total / frameSize);
> ++ if(buffer.empty())
> ++ {
> ++ /* Got samples to read, but no place to store it. Drop it. */
> ++ static char junk[4096];
> ++ sio_read(mSndHandle, junk, sizeof(junk) - (sizeof(junk)%frameSize));
> ++ }
> + }
> +
> + return 0;
> +@@ -371,76 +370,80 @@ void SndioCapture::open(const char *name)
> + throw al::backend_exception{al::backend_error::NoDevice, "Device name \"%s\" not found",
> + name};
> +
> +- mSndHandle = sio_open(nullptr, SIO_REC, 0);
> ++ mSndHandle = sio_open(nullptr, SIO_REC, true);
> + if(mSndHandle == nullptr)
> + throw al::backend_exception{al::backend_error::NoDevice, "Could not open backend device"};
> +
> +- sio_par par;
> +- sio_initpar(&par);
> +-
> ++ SioPar par;
> + switch(mDevice->FmtType)
> + {
> + case DevFmtByte:
> +- par.bps = 1;
> ++ par.bits = 8;
> + par.sig = 1;
> + break;
> + case DevFmtUByte:
> +- par.bps = 1;
> ++ par.bits = 8;
> + par.sig = 0;
> + break;
> + case DevFmtShort:
> +- par.bps = 2;
> ++ par.bits = 16;
> + par.sig = 1;
> + break;
> + case DevFmtUShort:
> +- par.bps = 2;
> ++ par.bits = 16;
> + par.sig = 0;
> + break;
> + case DevFmtInt:
> +- par.bps = 4;
> ++ par.bits = 32;
> + par.sig = 1;
> + break;
> + case DevFmtUInt:
> +- par.bps = 4;
> ++ par.bits = 32;
> + par.sig = 0;
> + break;
> + case DevFmtFloat:
> + throw al::backend_exception{al::backend_error::DeviceError,
> + "%s capture samples not supported", DevFmtTypeString(mDevice->FmtType)};
> + }
> +- par.bits = par.bps * 8;
> ++ par.bps = SIO_BPS(par.bits);
> + par.le = SIO_LE_NATIVE;
> +- par.msb = SIO_LE_NATIVE ? 0 : 1;
> ++ par.msb = 1;
> + par.rchan = mDevice->channelsFromFmt();
> + par.rate = mDevice->Frequency;
> +
> + par.appbufsz = maxu(mDevice->BufferSize, mDevice->Frequency/10);
> +- par.round = minu(par.appbufsz, mDevice->Frequency/40);
> ++ par.round = minu(par.appbufsz/2, mDevice->Frequency/40);
> +
> +- mDevice->UpdateSize = par.round;
> +- mDevice->BufferSize = par.appbufsz;
> +-
> + if(!sio_setpar(mSndHandle, &par) || !sio_getpar(mSndHandle, &par))
> + throw al::backend_exception{al::backend_error::DeviceError,
> + "Failed to set device praameters"};
> +
> +- if(par.bits != par.bps*8)
> ++ if(par.bps > 1 && par.le != SIO_LE_NATIVE)
> + throw al::backend_exception{al::backend_error::DeviceError,
> ++ "%s-endian samples not supported", par.le ? "Little" : "Big"};
> ++ if(par.bits < par.bps*8 && !par.msb)
> ++ throw al::backend_exception{al::backend_error::DeviceError,
> + "Padded samples not supported (got %u of %u bits)", par.bits, par.bps*8};
> +
> +- if(!((mDevice->FmtType == DevFmtByte && par.bits == 8 && par.sig != 0)
> +- || (mDevice->FmtType == DevFmtUByte && par.bits == 8 && par.sig == 0)
> +- || (mDevice->FmtType == DevFmtShort && par.bits == 16 && par.sig != 0)
> +- || (mDevice->FmtType == DevFmtUShort && par.bits == 16 && par.sig == 0)
> +- || (mDevice->FmtType == DevFmtInt && par.bits == 32 && par.sig != 0)
> +- || (mDevice->FmtType == DevFmtUInt && par.bits == 32 && par.sig == 0))
> +- || mDevice->channelsFromFmt() != par.rchan || mDevice->Frequency != par.rate)
> ++ auto match_fmt = [](DevFmtType fmttype, const sio_par &par) -> bool
> ++ {
> ++ return (fmttype == DevFmtByte && par.bps == 1 && par.sig != 0)
> ++ || (fmttype == DevFmtUByte && par.bps == 1 && par.sig == 0)
> ++ || (fmttype == DevFmtShort && par.bps == 2 && par.sig != 0)
> ++ || (fmttype == DevFmtUShort && par.bps == 2 && par.sig == 0)
> ++ || (fmttype == DevFmtInt && par.bps == 4 && par.sig != 0)
> ++ || (fmttype == DevFmtUInt && par.bps == 4 && par.sig == 0);
> ++ };
> ++ if(!match_fmt(mDevice->FmtType, par) || mDevice->channelsFromFmt() != par.rchan
> ++ || mDevice->Frequency != par.rate)
> + throw al::backend_exception{al::backend_error::DeviceError,
> + "Failed to set format %s %s %uhz, got %c%u %u-channel %uhz instead",
> + DevFmtTypeString(mDevice->FmtType), DevFmtChannelsString(mDevice->FmtChans),
> +- mDevice->Frequency, par.sig?'s':'u', par.bits, par.rchan, par.rate};
> ++ mDevice->Frequency, par.sig?'s':'u', par.bps*8, par.rchan, par.rate};
> +
> + mRing = RingBuffer::Create(mDevice->BufferSize, par.bps*par.rchan, false);
> ++ mDevice->BufferSize = static_cast<uint>(mRing->writeSpace());
> ++ mDevice->UpdateSize = par.round;
> +
> + setDefaultChannelOrder();
> +
>
No comments:
Post a Comment