Sorry to jump-in, but could this be similar to a problem I have since 6.7 ?
https://marc.info/?l=openbsd-misc&m=159611309426907&w=2
tldr;
Server does not finish boot until I connect to the server's java console on the iRMC (console redirection).
G
On 31/01/2022 16:51, Mark Kettenis wrote:
>> Date: Mon, 31 Jan 2022 15:41:32 +0100
>> From: Jan Stary <hans@stare.cz>
>>
>> On Jan 31 14:47:41, mark.kettenis@xs4all.nl wrote:
>>>> Date: Mon, 31 Jan 2022 14:03:29 +0100
>>>> From: Jan Stary <hans@stare.cz>
>>>>> On Jan 26 18:02:17, mark.kettenis@xs4all.nl wrote:
>>>>> ----------------------------
>>>>> revision 1.406
>>>>> date: 2022/01/26 14:39:07; author: kettenis; state: Exp; lines: +2 -2; commitid: zL3Ot2UVnkpDz6go;
>>>>> An ACPI device needs to be both present and enabled for it to function.
>>>>> So only attempt to attach hardware that has both bits enabled. This fixes
>>>>> an issue where com(4) would attach for a disabled serial port leading to
>>>>> misdetection of the hardware variant and a subsequent hang when /etc/rc
>>>>> runs ttyflags -a.
>>>>
>>>> While this fixes the original problem on Dell PowerEdge
>>>> it also seems to make /dev/console disappear on Beagle Bone Black
>>>> (current/armv7) - last good dmesg and current dmesg below,
>>>> the highlight of the diff being
>>>>
>>>> -com0 at omsysc7: ti16750, 64 byte fifo
>>>> -com0: console
>>>> +"serial" at omsysc7 not configured
>>>> +init: can't open /dev/console: Device not configured
>>>>
>>>> Jan
>>> Sorry, but no, the code I changed isn't even compiled on armv7.
>> Ah, sorry for the confusion.
>>
>>> Not sure what's happening here. Are both kernels running with the
>>> same U-Boot version?
>> Yes, U-Boot SPL 2021.10 (Nov 01 2021 - 20:37:54 -0600)
> Good. Did you try building a current kernel yourself? Sometimes
> there are patches that need testing in the snapshots. In fact, the
> Jan 24 may have had a version of Theo's fix for your ttyflags problem
> in it ;).
>
>>>> OpenBSD 7.0-current (GENERIC) #0: Tue Jan 4 22:31:14 CET 2022
>>>> hans@bbb.stare.cz:/usr/src/sys/arch/armv7/compile/GENERIC
>>>> real mem = 484184064 (461MB)
>>>> avail mem = 463884288 (442MB)
>>>> random: good seed from bootblocks
>>>> mainbus0 at root: TI AM335x BeagleBone Black
>>>> cpu0 at mainbus0 mpidr 0: ARM Cortex-A8 r3p2
>>>> cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>>>> cpu0: 256KB 64b/line 8-way L2 cache
>>>> omap0 at mainbus0
>>>> prcm0 at omap0 rev 0.2
>>>> dmtimer0 at omap0 rev 3.1
>>>> dmtimer1 at omap0 rev 3.1
>>>> omsysc0 at mainbus0: "target-module"
>>>> omsysc1 at omsysc0: "target-module"
>>>> "pmu" at omsysc1 not configured
>>>> simplebus0 at mainbus0: "ocp"
>>>> intc0 at simplebus0 rev 5.0
>>>> omsysc2 at simplebus0: "target-module"
>>>> simplebus1 at simplebus0: "interconnect"
>>>> simplebus2 at simplebus1: "segment"
>>>> simplebus3 at simplebus1: "segment"
>>>> omsysc3 at simplebus3: "target-module"
>>>> "cpu" at omsysc3 not configured
>>>> simplebus4 at simplebus1: "segment"
>>>> omsysc4 at simplebus4: "target-module"
>>>> simplebus5 at omsysc4: "prcm"
>>>> omcm0 at simplebus5: "per-cm"
>>>> omclock0 at omcm0: "l4ls-clkctrl"
>>>> omclock1 at omcm0: "l3s-clkctrl"
>>>> omclock2 at omcm0: "l3-clkctrl"
>>>> omclock3 at omcm0: "l4hs-clkctrl"
>>>> omclock4 at omcm0: "pruss-ocp-clkctrl"
>>>> omclock5 at omcm0: "cpsw-125mhz-clkctrl"
>>>> omclock6 at omcm0: "lcdc-clkctrl"
>>>> omclock7 at omcm0: "clk-24mhz-clkctrl"
>>>> omcm1 at simplebus5: "wkup-cm"
>>>> omclock8 at omcm1: "l4-wkup-clkctrl"
>>>> omclock9 at omcm1: "l3-aon-clkctrl"
>>>> omclock10 at omcm1: "l4-wkup-aon-clkctrl"
>>>> omcm2 at simplebus5: "mpu-cm"
>>>> omclock11 at omcm2: "mpu-clkctrl"
>>>> omcm3 at simplebus5: "l4-rtc-cm"
>>>> omclock12 at omcm3: "l4-rtc-clkctrl"
>>>> omcm4 at simplebus5: "gfx-l3-cm"
>>>> omclock13 at omcm4: "gfx-l3-clkctrl"
>>>> omcm5 at simplebus5: "l4-cefuse-cm"
>>>> omclock14 at omcm5: "l4-cefuse-clkctrl"
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> omsysc5 at simplebus4: "target-module"
>>>> simplebus6 at omsysc5: "scm"
>>>> syscon0 at simplebus6: "scm_conf"
>>>> pinctrl0 at simplebus6
>>>> "control" at simplebus6 not configured
>>>> "wkup_m3_ipc" at simplebus6 not configured
>>>> "dma-router" at simplebus6 not configured
>>>> omsysc6 at simplebus4: "target-module"
>>>> omgpio0 at omsysc6: rev 0.1
>>>> gpio0 at omgpio0: 32 pins
>>>> omsysc7 at simplebus4: "target-module"
>>>> com0 at omsysc7: ti16750, 64 byte fifo
>>>> com0: console
>>>> omsysc8 at simplebus4: "target-module"
>>>> tiiic0 at omsysc8 rev 0.11
>>>> iic0 at tiiic0
>>>> "ti,tps65217" at iic0 addr 0x24 not configured
>>>> "atmel,24c256" at iic0 addr 0x50 not configured
>>>> nxphdmi0 at iic0 addr 0x70: rev 0x0301
>>>> nxphdmi0: no display detected
>>>> omsysc9 at simplebus4: "target-module"
>>>> omsysc10 at simplebus4: "target-module"
>>>> "timer" at omsysc10 not configured
>>>> omsysc11 at simplebus4: "target-module"
>>>> omdog0 at omsysc11 rev 0.1
>>>> omsysc12 at simplebus4: "target-module"
>>>> "rtc" at omsysc12 not configured
>>>> simplebus7 at simplebus0: "interconnect"
>>>> simplebus8 at simplebus7: "segment"
>>>> omsysc13 at simplebus8: "target-module"
>>>> omsysc14 at simplebus8: "target-module"
>>>> omsysc15 at simplebus8: "target-module"
>>>> omsysc16 at simplebus8: "target-module"
>>>> omsysc17 at simplebus8: "target-module"
>>>> "mcasp" at omsysc17 not configured
>>>> omsysc18 at simplebus8: "target-module"
>>>> omsysc19 at simplebus8: "target-module"
>>>> "timer" at omsysc19 not configured
>>>> omsysc20 at simplebus8: "target-module"
>>>> "timer" at omsysc20 not configured
>>>> omsysc21 at simplebus8: "target-module"
>>>> "timer" at omsysc21 not configured
>>>> omsysc22 at simplebus8: "target-module"
>>>> "timer" at omsysc22 not configured
>>>> omsysc23 at simplebus8: "target-module"
>>>> "timer" at omsysc23 not configured
>>>> omsysc24 at simplebus8: "target-module"
>>>> "timer" at omsysc24 not configured
>>>> omsysc25 at simplebus8: "target-module"
>>>> omgpio1 at omsysc25: rev 0.1
>>>> gpio1 at omgpio1: 32 pins
>>>> omsysc26 at simplebus8: "target-module"
>>>> ommmc0 at omsysc26
>>>> sdmmc0 at ommmc0: 4-bit
>>>> omsysc27 at simplebus8: "target-module"
>>>> omsysc28 at simplebus8: "target-module"
>>>> "mailbox" at omsysc28 not configured
>>>> omsysc29 at simplebus8: "target-module"
>>>> "spinlock" at omsysc29 not configured
>>>> simplebus9 at simplebus7: "segment"
>>>> omsysc30 at simplebus9: "target-module"
>>>> tiiic1 at omsysc30 rev 0.11
>>>> iic1 at tiiic1
>>>> "atmel,24c256" at iic1 addr 0x54 not configured
>>>> "atmel,24c256" at iic1 addr 0x55 not configured
>>>> "atmel,24c256" at iic1 addr 0x56 not configured
>>>> "atmel,24c256" at iic1 addr 0x57 not configured
>>>> omsysc31 at simplebus9: "target-module"
>>>> omsysc32 at simplebus9: "target-module"
>>>> omsysc33 at simplebus9: "target-module"
>>>> omsysc34 at simplebus9: "target-module"
>>>> omsysc35 at simplebus9: "target-module"
>>>> omgpio2 at omsysc35: rev 0.1
>>>> gpio2 at omgpio2: 32 pins
>>>> omsysc36 at simplebus9: "target-module"
>>>> omgpio3 at omsysc36: rev 0.1
>>>> gpio3 at omgpio3: 32 pins
>>>> omsysc37 at simplebus9: "target-module"
>>>> omsysc38 at simplebus9: "target-module"
>>>> omsysc39 at simplebus9: "target-module"
>>>> ommmc1 at omsysc39
>>>> sdmmc1 at ommmc1: 8-bit
>>>> simplebus10 at simplebus7: "segment"
>>>> omsysc40 at simplebus10: "target-module"
>>>> "mpu" at omsysc40 not configured
>>>> simplebus11 at simplebus7: "segment"
>>>> omsysc41 at simplebus11: "target-module"
>>>> omsysc42 at simplebus11: "target-module"
>>>> omsysc43 at simplebus11: "target-module"
>>>> omsysc44 at simplebus11: "target-module"
>>>> amdisplay0 at omsysc44
>>>> amdisplay0: no display attached.
>>>> omsysc45 at simplebus11: "target-module"
>>>> omrng0 at omsysc45
>>>> simplebus12 at simplebus0: "interconnect"
>>>> simplebus13 at simplebus12: "segment"
>>>> simplebus14 at simplebus0: "interconnect"
>>>> simplebus15 at simplebus14: "segment"
>>>> omsysc46 at simplebus15: "target-module"
>>>> cpsw0 at omsysc46: version 1.12 (0), address 90:59:af:82:2e:7e
>>>> ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0001f0, model 0x000f
>>>> simplebus16 at simplebus0: "interconnect"
>>>> simplebus17 at simplebus16: "segment"
>>>> omsysc47 at simplebus0: "target-module"
>>>> "dma" at omsysc47 not configured
>>>> omsysc48 at simplebus0: "target-module"
>>>> "dma" at omsysc48 not configured
>>>> omsysc49 at simplebus0: "target-module"
>>>> "dma" at omsysc49 not configured
>>>> omsysc50 at simplebus0: "target-module"
>>>> "dma" at omsysc50 not configured
>>>> omsysc51 at simplebus0: "target-module"
>>>> omsysc52 at simplebus0: "target-module"
>>>> "usb-phy" at omsysc52 not configured
>>>> "usb" at omsysc52 not configured
>>>> "usb-phy" at omsysc52 not configured
>>>> "usb" at omsysc52 not configured
>>>> "dma-controller" at omsysc52 not configured
>>>> omsysc53 at simplebus0: "target-module"
>>>> "sram" at omsysc53 not configured
>>>> omsysc54 at simplebus0: "target-module"
>>>> "emif" at omsysc54 not configured
>>>> omsysc55 at simplebus0: "target-module"
>>>> omsysc56 at simplebus0: "target-module"
>>>> "sham" at omsysc56 not configured
>>>> omsysc57 at simplebus0: "target-module"
>>>> "aes" at omsysc57 not configured
>>>> scsibus0 at sdmmc1: 2 targets, initiator 0
>>>> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, MMC02G, 0000> removable
>>>> sd0: 1832MB, 512 bytes/sector, 3751936 sectors
>>>> scsibus1 at sdmmc0: 2 targets, initiator 0
>>>> sd1 at scsibus1 targ 1 lun 0: <SD/MMC, SU32G, 0080> removable
>>>> sd1: 30436MB, 512 bytes/sector, 62333952 sectors
>>>> vscsi0 at root
>>>> scsibus2 at vscsi0: 256 targets
>>>> softraid0 at root
>>>> scsibus3 at softraid0: 256 targets
>>>> bootfile: sd0a:/bsd
>>>> boot device: sd0
>>>> root on sd1a (93aae518915c8841.a) swap on sd1b dump on sd1b
>>>> WARNING: CHECK AND RESET THE DATE!
>>>>
>>>>
>>>>
>>>> U-Boot 2021.10 (Nov 01 2021 - 20:37:54 -0600)
>>>> OpenBSD 7.0-current (GENERIC) #14: Mon Jan 24 04:58:29 MST 2022
>>>> deraadt@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC
>>>> real mem = 484184064 (461MB)
>>>> avail mem = 463872000 (442MB)
>>>> random: boothowto does not indicate good seed
>>>> mainbus0 at root: TI AM335x BeagleBone Black
>>>> cpu0 at mainbus0 mpidr 0: ARM Cortex-A8 r3p2
>>>> cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
>>>> cpu0: 256KB 64b/line 8-way L2 cache
>>>> omap0 at mainbus0
>>>> prcm0 at omap0 rev 0.2
>>>> dmtimer0 at omap0 rev 3.1
>>>> dmtimer1 at omap0 rev 3.1
>>>> omsysc0 at mainbus0: "target-module"
>>>> omsysc1 at omsysc0: "target-module"
>>>> "pmu" at omsysc1 not configured
>>>> simplebus0 at mainbus0: "ocp"
>>>> intc0 at simplebus0 rev 5.0
>>>> omsysc2 at simplebus0: "target-module"
>>>> simplebus1 at simplebus0: "interconnect"
>>>> simplebus2 at simplebus1: "segment"
>>>> simplebus3 at simplebus1: "segment"
>>>> omsysc3 at simplebus3: "target-module"
>>>> "cpu" at omsysc3 not configured
>>>> simplebus4 at simplebus1: "segment"
>>>> omsysc4 at simplebus4: "target-module"
>>>> simplebus5 at omsysc4: "prcm"
>>>> omcm0 at simplebus5: "per-cm"
>>>> omclock0 at omcm0: "l4ls-clkctrl"
>>>> omclock1 at omcm0: "l3s-clkctrl"
>>>> omclock2 at omcm0: "l3-clkctrl"
>>>> omclock3 at omcm0: "l4hs-clkctrl"
>>>> omclock4 at omcm0: "pruss-ocp-clkctrl"
>>>> omclock5 at omcm0: "cpsw-125mhz-clkctrl"
>>>> omclock6 at omcm0: "lcdc-clkctrl"
>>>> omclock7 at omcm0: "clk-24mhz-clkctrl"
>>>> omcm1 at simplebus5: "wkup-cm"
>>>> omclock8 at omcm1: "l4-wkup-clkctrl"
>>>> omclock9 at omcm1: "l3-aon-clkctrl"
>>>> omclock10 at omcm1: "l4-wkup-aon-clkctrl"
>>>> omcm2 at simplebus5: "mpu-cm"
>>>> omclock11 at omcm2: "mpu-clkctrl"
>>>> omcm3 at simplebus5: "l4-rtc-cm"
>>>> omclock12 at omcm3: "l4-rtc-clkctrl"
>>>> omcm4 at simplebus5: "gfx-l3-cm"
>>>> omclock13 at omcm4: "gfx-l3-clkctrl"
>>>> omcm5 at simplebus5: "l4-cefuse-cm"
>>>> omclock14 at omcm5: "l4-cefuse-clkctrl"
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> "prm" at simplebus5 not configured
>>>> omsysc5 at simplebus4: "target-module"
>>>> simplebus6 at omsysc5: "scm"
>>>> syscon0 at simplebus6: "scm_conf"
>>>> pinctrl0 at simplebus6
>>>> "control" at simplebus6 not configured
>>>> "wkup_m3_ipc" at simplebus6 not configured
>>>> "dma-router" at simplebus6 not configured
>>>> omsysc6 at simplebus4: "target-module"
>>>> omgpio0 at omsysc6: rev 0.1
>>>> gpio0 at omgpio0: 32 pins
>>>> omsysc7 at simplebus4: "target-module"
>>>> "serial" at omsysc7 not configured
>>>> omsysc8 at simplebus4: "target-module"
>>>> tiiic0 at omsysc8 rev 0.11
>>>> iic0 at tiiic0
>>>> "ti,tps65217" at iic0 addr 0x24 not configured
>>>> "atmel,24c256" at iic0 addr 0x50 not configured
>>>> nxphdmi0 at iic0 addr 0x70: rev 0x0301
>>>> nxphdmi0: no display detected
>>>> omsysc9 at simplebus4: "target-module"
>>>> omsysc10 at simplebus4: "target-module"
>>>> "timer" at omsysc10 not configured
>>>> omsysc11 at simplebus4: "target-module"
>>>> omdog0 at omsysc11 rev 0.1
>>>> omsysc12 at simplebus4: "target-module"
>>>> "rtc" at omsysc12 not configured
>>>> simplebus7 at simplebus0: "interconnect"
>>>> simplebus8 at simplebus7: "segment"
>>>> omsysc13 at simplebus8: "target-module"
>>>> omsysc14 at simplebus8: "target-module"
>>>> omsysc15 at simplebus8: "target-module"
>>>> omsysc16 at simplebus8: "target-module"
>>>> omsysc17 at simplebus8: "target-module"
>>>> "mcasp" at omsysc17 not configured
>>>> omsysc18 at simplebus8: "target-module"
>>>> omsysc19 at simplebus8: "target-module"
>>>> "timer" at omsysc19 not configured
>>>> omsysc20 at simplebus8: "target-module"
>>>> "timer" at omsysc20 not configured
>>>> omsysc21 at simplebus8: "target-module"
>>>> "timer" at omsysc21 not configured
>>>> omsysc22 at simplebus8: "target-module"
>>>> "timer" at omsysc22 not configured
>>>> omsysc23 at simplebus8: "target-module"
>>>> "timer" at omsysc23 not configured
>>>> omsysc24 at simplebus8: "target-module"
>>>> "timer" at omsysc24 not configured
>>>> omsysc25 at simplebus8: "target-module"
>>>> omgpio1 at omsysc25: rev 0.1
>>>> gpio1 at omgpio1: 32 pins
>>>> omsysc26 at simplebus8: "target-module"
>>>> ommmc0 at omsysc26
>>>> sdmmc0 at ommmc0: 4-bit
>>>> omsysc27 at simplebus8: "target-module"
>>>> omsysc28 at simplebus8: "target-module"
>>>> "mailbox" at omsysc28 not configured
>>>> omsysc29 at simplebus8: "target-module"
>>>> "spinlock" at omsysc29 not configured
>>>> simplebus9 at simplebus7: "segment"
>>>> omsysc30 at simplebus9: "target-module"
>>>> tiiic1 at omsysc30 rev 0.11
>>>> iic1 at tiiic1
>>>> "atmel,24c256" at iic1 addr 0x54 not configured
>>>> "atmel,24c256" at iic1 addr 0x55 not configured
>>>> "atmel,24c256" at iic1 addr 0x56 not configured
>>>> "atmel,24c256" at iic1 addr 0x57 not configured
>>>> omsysc31 at simplebus9: "target-module"
>>>> omsysc32 at simplebus9: "target-module"
>>>> omsysc33 at simplebus9: "target-module"
>>>> omsysc34 at simplebus9: "target-module"
>>>> omsysc35 at simplebus9: "target-module"
>>>> omgpio2 at omsysc35: rev 0.1
>>>> gpio2 at omgpio2: 32 pins
>>>> omsysc36 at simplebus9: "target-module"
>>>> omgpio3 at omsysc36: rev 0.1
>>>> gpio3 at omgpio3: 32 pins
>>>> omsysc37 at simplebus9: "target-module"
>>>> omsysc38 at simplebus9: "target-module"
>>>> omsysc39 at simplebus9: "target-module"
>>>> ommmc1 at omsysc39
>>>> sdmmc1 at ommmc1: 8-bit
>>>> simplebus10 at simplebus7: "segment"
>>>> omsysc40 at simplebus10: "target-module"
>>>> "mpu" at omsysc40 not configured
>>>> simplebus11 at simplebus7: "segment"
>>>> omsysc41 at simplebus11: "target-module"
>>>> omsysc42 at simplebus11: "target-module"
>>>> omsysc43 at simplebus11: "target-module"
>>>> omsysc44 at simplebus11: "target-module"
>>>> amdisplay0 at omsysc44
>>>> amdisplay0: no display attached.
>>>> omsysc45 at simplebus11: "target-module"
>>>> omrng0 at omsysc45
>>>> simplebus12 at simplebus0: "interconnect"
>>>> simplebus13 at simplebus12: "segment"
>>>> simplebus14 at simplebus0: "interconnect"
>>>> simplebus15 at simplebus14: "segment"
>>>> omsysc46 at simplebus15: "target-module"
>>>> cpsw0 at omsysc46: version 1.12 (0), address 90:59:af:82:2e:7e
>>>> ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0001f0, model 0x000f
>>>> simplebus16 at simplebus0: "interconnect"
>>>> simplebus17 at simplebus16: "segment"
>>>> omsysc47 at simplebus0: "target-module"
>>>> "dma" at omsysc47 not configured
>>>> omsysc48 at simplebus0: "target-module"
>>>> "dma" at omsysc48 not configured
>>>> omsysc49 at simplebus0: "target-module"
>>>> "dma" at omsysc49 not configured
>>>> omsysc50 at simplebus0: "target-module"
>>>> "dma" at omsysc50 not configured
>>>> omsysc51 at simplebus0: "target-module"
>>>> omsysc52 at simplebus0: "target-module"
>>>> "usb-phy" at omsysc52 not configured
>>>> "usb" at omsysc52 not configured
>>>> "usb-phy" at omsysc52 not configured
>>>> "usb" at omsysc52 not configured
>>>> "dma-controller" at omsysc52 not configured
>>>> omsysc53 at simplebus0: "target-module"
>>>> "sram" at omsysc53 not configured
>>>> omsysc54 at simplebus0: "target-module"
>>>> "emif" at omsysc54 not configured
>>>> omsysc55 at simplebus0: "target-module"
>>>> omsysc56 at simplebus0: "target-module"
>>>> "sham" at omsysc56 not configured
>>>> omsysc57 at simplebus0: "target-module"
>>>> "aes" at omsysc57 not configured
>>>> scsibus0 at sdmmc1: 2 targets, initiator 0
>>>> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, MMC02G, 0000> removable
>>>> sd0: 1832MB, 512 bytes/sector, 3751936 sectors
>>>> scsibus1 at sdmmc0: 2 targets, initiator 0
>>>> sd1 at scsibus1 targ 1 lun 0: <SD/MMC, SU32G, 0080> removable
>>>> sd1: 30436MB, 512 bytes/sector, 62333952 sectors
>>>> vscsi0 at root
>>>> scsibus2 at vscsi0: 256 targets
>>>> softraid0 at root
>>>> scsibus3 at softraid0: 256 targets
>>>> bootfile: sd0a:/bsd
>>>> boot device: sd0
>>>> root on sd1a (93aae518915c8841.a) swap on sd1b dump on sd1b
>>>> WARNING: CHECK AND RESET THE DATE!
>>>> init: can't open /dev/console: Device not configured
>>>> init: can't open /dev/console: Device not configured
>>>> init: can't open /dev/console: Device not configured
>>>> init: can't open /dev/console: Device not configured
>>>>
No comments:
Post a Comment