Hi Stuart,
Good to hear from you. Hope you are well.
Yes sorry I am stretching the terms a little there, by userland I meant
third party packages..
From (https://www.openbsd.org/faq/upgrade71.html), as usual I just ran;
'sysupgrade' (auto reboot), 'sysmerge', 'reboot', and 'pkg_add -u' (no
longer boots).
So nothing funny.. And only after the 'pkg_add -u' command completed
successfully completed does the box start hanging (which is very strange as
this is just third-party packages.. this makes me think that some GUI
things have changed, and being headless it is causing a problem).
To make things awkward, when I try to boot from the upgraded install (I
still have the upgraded 7.1 SSD - I reinstalled 7.0 on a different SSD), I
tried booting to single user mode. And I can get to the maintenance prompt,
but before I can run any commands it hangs (and it hangs at slightly
different times within a few seconds I'd guess - sometime I can type a
whole command others only the first few characters). So the hang seems to
occur a little randomly, but always within a few seconds of getting to the
single user command prompt.
If I boot from the 7.1 installer, as mentioned, it seems to hang after I
have configured the network interfaces. At least that is as far as I have
been able to get before it freezes.
I don't think that looking at the installer code is going to give any
useful clues, as this fault happens irrespective of the installer (The
successfully upgraded system hangs on normal boot or single user boot).
Watching the normal boot of the upgraded 7.1 disk, the freeze seems to
happen at different places along the boot logs (variance is maybe ~40 boot
messages).
Once I can shut the firewall down again I will swap the disks back and
video the boot multiple times.
Thanks for your time :)
*dmesg from the re-installed 7.0;*
OpenBSD 7.0 (GENERIC.MP) #6: Mon Apr 4 00:47:02 MDT 2022
root@syspatch-70-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC.MP
real mem = 8485744640 (8092MB)
avail mem = 8212533248 (7832MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec280 (28 entries)
bios0: vendor American Megatrends Inc. version "3.1" date 05/14/2018
bios0: Supermicro X10SLV-Q
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT SSDT SSDT SSDT SSDT SSDT MCFG HPET
SSDT SSDT DMAR
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
GLAN(S4) EHC1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.69 MHz, 06-3c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 2 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus 3 (RP04)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: FN00, resource for FAN0
acpipwrres8 at acpi0: FN01, resource for FAN1
acpipwrres9 at acpi0: FN02, resource for FAN2
acpipwrres10 at acpi0: FN03, resource for FAN3
acpipwrres11 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3600 MHz: speeds: 3601, 3600, 3400, 3200, 3000,
2800, 2600, 2400, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
mcx0 at pci1 dev 0 function 0 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3a
mcx1 at pci1 dev 0 function 1 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3b
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, xHCI
1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
em0 at pci0 dev 25 function 0 "Intel I217-V" rev 0x05: msi, address
00:25:90:e1:e5:46
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi
pci3 at ppb2 bus 3
em1 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address
00:25:90:e1:e5:47
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Q87 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI
1.3
ahci0: port 4: 6.0Gb/s
ahci0: port 5: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 4 lun 0: <ATA, M4-CT064M4SSD2, 000F>
naa.500a075103185123
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
sd1 at scsibus1 targ 5 lun 0: <ATA, INTEL SSDSC2CT18, 335t>
naa.55cd2e4000038062
sd1: 171705MB, 512 bytes/sector, 351651888 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8
int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
"Intel 8 Series Thermal" rev 0x05 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0x290/2 not configured
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (2d1c73e93d7b352e.a) swap on sd0b dump on sd0b
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
WARNING: / was not properly unmounted
WARNING: /home was not properly unmounted
WARNING: /usr/local was not properly unmounted
syncing disks... done
rebooti
OpenBSD 7.0 (GENERIC.MP) #6: Mon Apr 4 00:47:02 MDT 2022
root@syspatch-70-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC.MP
real mem = 8485744640 (8092MB)
avail mem = 8212537344 (7832MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec280 (28 entries)
bios0: vendor American Megatrends Inc. version "3.1" date 05/14/2018
bios0: Supermicro X10SLV-Q
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT SSDT SSDT SSDT SSDT SSDT MCFG HPET
SSDT SSDT DMAR
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
GLAN(S4) EHC1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.62 MHz, 06-3c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 2 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus 3 (RP04)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: FN00, resource for FAN0
acpipwrres8 at acpi0: FN01, resource for FAN1
acpipwrres9 at acpi0: FN02, resource for FAN2
acpipwrres10 at acpi0: FN03, resource for FAN3
acpipwrres11 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3600 MHz: speeds: 3601, 3600, 3400, 3200, 3000,
2800, 2600, 2400, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
mcx0 at pci1 dev 0 function 0 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3a
mcx1 at pci1 dev 0 function 1 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3b
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, xHCI
1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
em0 at pci0 dev 25 function 0 "Intel I217-V" rev 0x05: msi, address
00:25:90:e1:e5:46
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi
pci3 at ppb2 bus 3
em1 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address
00:25:90:e1:e5:47
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Q87 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI
1.3
ahci0: port 4: 6.0Gb/s
ahci0: port 5: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 4 lun 0: <ATA, M4-CT064M4SSD2, 000F>
naa.500a075103185123
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
sd1 at scsibus1 targ 5 lun 0: <ATA, INTEL SSDSC2CT18, 335t>
naa.55cd2e4000038062
sd1: 171705MB, 512 bytes/sector, 351651888 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8
int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
"Intel 8 Series Thermal" rev 0x05 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0x290/2 not configured
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (2d1c73e93d7b352e.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
WARNING: /home was not properly unmounted
WARNING: /usr/local was not properly unmounted
WARNING: /var was not properly unmounted
syncing disks... done
rebootin
OpenBSD 7.0 (GENERIC.MP) #6: Mon Apr 4 00:47:02 MDT 2022
root@syspatch-70-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC.MP
real mem = 8485744640 (8092MB)
avail mem = 8212549632 (7832MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec280 (28 entries)
bios0: vendor American Megatrends Inc. version "3.1" date 05/14/2018
bios0: Supermicro X10SLV-Q
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT SSDT SSDT SSDT SSDT SSDT MCFG HPET
SSDT SSDT DMAR
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
GLAN(S4) EHC1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.64 MHz, 06-3c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 2 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus 3 (RP04)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: FN00, resource for FAN0
acpipwrres8 at acpi0: FN01, resource for FAN1
acpipwrres9 at acpi0: FN02, resource for FAN2
acpipwrres10 at acpi0: FN03, resource for FAN3
acpipwrres11 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3600 MHz: speeds: 3601, 3600, 3400, 3200, 3000,
2800, 2600, 2400, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
mcx0 at pci1 dev 0 function 0 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3a
mcx1 at pci1 dev 0 function 1 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3b
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, xHCI
1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
em0 at pci0 dev 25 function 0 "Intel I217-V" rev 0x05: msi, address
00:25:90:e1:e5:46
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi
pci3 at ppb2 bus 3
em1 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address
00:25:90:e1:e5:47
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Q87 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI
1.3
ahci0: port 4: 6.0Gb/s
ahci0: port 5: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 4 lun 0: <ATA, M4-CT064M4SSD2, 000F>
naa.500a075103185123
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
sd1 at scsibus1 targ 5 lun 0: <ATA, INTEL SSDSC2CT18, 335t>
naa.55cd2e4000038062
sd1: 171705MB, 512 bytes/sector, 351651888 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8
int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
"Intel 8 Series Thermal" rev 0x05 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0x290/2 not configured
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (2d1c73e93d7b352e.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
WARNING: /home was not properly unmounted
WARNING: /usr/local was not properly unmounted
WARNING: /var was not properly unmounted
WARNING: /usr/src was not properly unmounted
syncing disks... done
rebootin
OpenBSD 7.0 (GENERIC.MP) #6: Mon Apr 4 00:47:02 MDT 2022
root@syspatch-70-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC.MP
real mem = 8485744640 (8092MB)
avail mem = 8212537344 (7832MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec280 (28 entries)
bios0: vendor American Megatrends Inc. version "3.1" date 05/14/2018
bios0: Supermicro X10SLV-Q
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT SSDT SSDT SSDT SSDT SSDT MCFG HPET
SSDT SSDT DMAR
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
GLAN(S4) EHC1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.65 MHz, 06-3c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 2 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus 3 (RP04)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: FN00, resource for FAN0
acpipwrres8 at acpi0: FN01, resource for FAN1
acpipwrres9 at acpi0: FN02, resource for FAN2
acpipwrres10 at acpi0: FN03, resource for FAN3
acpipwrres11 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3600 MHz: speeds: 3601, 3600, 3400, 3200, 3000,
2800, 2600, 2400, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
mcx0 at pci1 dev 0 function 0 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3a
mcx1 at pci1 dev 0 function 1 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3b
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, xHCI
1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
em0 at pci0 dev 25 function 0 "Intel I217-V" rev 0x05: msi, address
00:25:90:e1:e5:46
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi
pci3 at ppb2 bus 3
em1 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address
00:25:90:e1:e5:47
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Q87 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI
1.3
ahci0: port 4: 6.0Gb/s
ahci0: port 5: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 4 lun 0: <ATA, M4-CT064M4SSD2, 000F>
naa.500a075103185123
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
sd1 at scsibus1 targ 5 lun 0: <ATA, INTEL SSDSC2CT18, 335t>
naa.55cd2e4000038062
sd1: 171705MB, 512 bytes/sector, 351651888 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8
int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
"Intel 8 Series Thermal" rev 0x05 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0x290/2 not configured
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (2d1c73e93d7b352e.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
WARNING: /home was not properly unmounted
WARNING: /usr/local was not properly unmounted
WARNING: /var was not properly unmounted
WARNING: /usr/src was not properly unmounted
syncing disks... done
rebooti
OpenBSD 7.0 (GENERIC.MP) #6: Mon Apr 4 00:47:02 MDT 2022
root@syspatch-70-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC.MP
real mem = 8485744640 (8092MB)
avail mem = 8212529152 (7832MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec280 (28 entries)
bios0: vendor American Megatrends Inc. version "3.1" date 05/14/2018
bios0: Supermicro X10SLV-Q
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT SSDT SSDT SSDT SSDT SSDT MCFG HPET
SSDT SSDT DMAR
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
GLAN(S4) EHC1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.67 MHz, 06-3c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1280 v3 @ 3.60GHz, 3600.01 MHz, 06-3c-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 2 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus 3 (RP04)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: FN00, resource for FAN0
acpipwrres8 at acpi0: FN01, resource for FAN1
acpipwrres9 at acpi0: FN02, resource for FAN2
acpipwrres10 at acpi0: FN03, resource for FAN3
acpipwrres11 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3600 MHz: speeds: 3601, 3600, 3400, 3200, 3000,
2800, 2600, 2400, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
mcx0 at pci1 dev 0 function 0 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3a
mcx1 at pci1 dev 0 function 1 "Mellanox ConnectX-4 Lx" rev 0x00: FW
14.28.2006, msix, address ec:0d:9a:83:1f:3b
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, xHCI
1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
em0 at pci0 dev 25 function 0 "Intel I217-V" rev 0x05: msi, address
00:25:90:e1:e5:46
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi
pci3 at ppb2 bus 3
em1 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address
00:25:90:e1:e5:47
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel Q87 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI
1.3
ahci0: port 4: 6.0Gb/s
ahci0: port 5: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 4 lun 0: <ATA, M4-CT064M4SSD2, 000F>
naa.500a075103185123
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
sd1 at scsibus1 targ 5 lun 0: <ATA, INTEL SSDSC2CT18, 335t>
naa.55cd2e4000038062
sd1: 171705MB, 512 bytes/sector, 351651888 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8
int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
"Intel 8 Series Thermal" rev 0x05 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
wbsio0 port 0x290/2 not configured
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.05 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (2d1c73e93d7b352e.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
WARNING: /home was not properly unmounted
WARNING: /usr/local was not properly unmounted
WARNING: /var was not properly unmounted
WARNING: /usr/src was not properly unmounted
On Sun, May 1, 2022 at 7:42 PM Stuart Henderson <stu.lists@spacehopper.org>
wrote:
> On 2022-05-01, Andrew Lemin <andrew.lemin@gmail.com> wrote:
> > Hi all,
> >
> > I am totally stumped with issues while upgrading/installing 7.1 and I
> need
> > some help!
> >
> > Server; Supermicro X10SLV-Q (Intel Q87 Express), Xeon E3-1280 v3, 8G RAM,
> > Mellanox 10G NIC
> >
> > This server has been running OpenBSD flawlessly for years. I followed the
> > upgrade instructions and was able to reboot fine onto the 7.1 kernel (I
> > rebooted a couple of times on the 7.1 kernel in fact). However after I
> run
> > 'pkg_add -u' to upgrade all of userland to 7.1, the machine started
> hanging
> > during boot.
> >
> > The hang looked like an IO problem as it would always hang around the
> disk
> > setup stages.
> > I went into the BIOS and tried optimised defaults and failsafe defaults
> but
> > no luck..
> >
> > I also downloaded a fresh copy and tried installing 7.1 from flash,
> however
> > the 7.1 installer also hangs. It hangs in the same place every time after
> > selecting 'done' to the networking config.
> > As I have a Mellanox card in here, I removed the NIC. but the hang
> > continues so its not that..
> >
> > I get nothing to debug, it just freezes. I have reinstalled 7.0 which is
> > still working perfectly so this is not a hardware fault.
> >
> > Is there anything I can do to increase the verbosity to see what driver
> it
> > is trying to load before the hang?
> >
> > Other information, this is a totally headless machine, with a Xeon CPU
> > without any onboard GPU. It has a console connection with
> > console-redirection in the bios, and I have to set the tty params during
> > boot to interact over console. Otherwise everything else is standard.
>
> If you can copy the console output (from boot loader to hang) from serial
> console into an email, that might give some clues.
>
> dmesg from 7.0 might be useful too.
>
> It's a bit unclear how you upgraded (pkg_add -u is for packages rather than
> userland parts of the OS) - normally you would upgrade kernel and userland
> such that you'd boot onto new kernel+userland at the same time, then update
> packages.
>
>
>
No comments:
Post a Comment