Hi,
I have a Intel NUC (NUC7CJYHN) which I installed OpenBSD 7.1 on it.
Installation went fine and most of the things work out of the box.
There is a SD card slot on the side that does not seem effective, the
only message I get is:
sdmmc0: can't enable card
There is no kernel activity if I plug a SD card at runtime nor booting
with an already entered card either.
The audio device seems detected but there is no way to get any sound
out of the internal speaker nor the audio jack. I guess this is due to
the "no supported codecs" as shown here:
azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev
0x06: msi
azalia0: no supported codecs
Here's the whole dmesg (see below for a AZALIA_DEBUG kernel enabled):
OpenBSD 7.1 (GENERIC.MP) #3: Sun May 15 10:27:01 MDT 2022
root@syspatch-71-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENER
IC.MP
real mem = 8122888192 (7746MB)
avail mem = 7859404800 (7495MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x69f6a000 (49 entries)
bios0: vendor Intel Corp. version "JYGLKCPX.86A.0065.2021.0722.1137"
date 07/22/2021
bios0: Intel(R) Client Systems NUC7CJYHN
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT
SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT BGRT TPM2 DMAR WDAT WSMT
acpi0: wakeup devices SIO1(S3) HDAS(S3) XHC_(S4) XDCI(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4)
PXSX(S4) RP06(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) J4025 CPU @ 2.00GHz, 1994.48 MHz, 06-7a-08
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAI
T,DS-
CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,PO
PCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF
,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,S
HA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETB
V1,XSAVES
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) J4025 CPU @ 2.00GHz, 1994.49 MHz, 06-7a-08
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAI
T,DS-
CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,PO
PCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF
,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,S
HA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETB
V1,XSAVES
cpu1: 4MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 2 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiec0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"ALPS0001" at acpi0 not configured
"WCOM508E" at acpi0 not configured
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
glkgpio0 at acpi0 GPO1 uid 1 addr 0xd0c40000/0xcef irq 14, 80 pins
glkgpio1 at acpi0 GPO0 uid 2 addr 0xd0c50000/0xaff irq 14, 80 pins
glkgpio2 at acpi0 GPO2 uid 3 addr 0xd0c90000/0x7bf irq 15, 20 pins
glkgpio3 at acpi0 GPO3 uid 4 addr 0xd0c80000/0x82f irq 14, 35 pins
"INT0E0C" at acpi0 not configured
"INT33A1" at acpi0 not configured
tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000
rev 0x0
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpipwrres0 at acpi0: DRST
acpipwrres1 at acpi0: DRST
acpipwrres2 at acpi0: DRST
acpipwrres3 at acpi0: DRST
acpipwrres4 at acpi0: DRST
acpipwrres5 at acpi0: DRST
acpipwrres6 at acpi0: WRST
acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpipwrres7 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 95 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1994 MHz: speeds: 2001, 2000, 1900, 1800,
1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x06
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 600" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, GEMINILAKE, gen 9
iwm0 at pci0 dev 12 function 0 "Intel AC 9560" rev 0x06, msix
azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev
0x06: msi
azalia0: no supported codecs
"Intel Gemini Lake MEI" rev 0x06 at pci0 dev 15 function 0 not
configured
ahci0 at pci0 dev 18 function 0 "Intel Gemini Lake AHCI" rev 0x06: msi,
AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, S3E0>
naa.50026b7784909eb6
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ppb0 at pci0 dev 19 function 0 "Intel Gemini Lake PCIE" rev 0xf6: msi
pci1 at ppb0 bus 1
unknown vendor 0x1aea product 0x6625 (class undefined unknown subclass
0x00, rev 0x00) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 19 function 2 "Intel Gemini Lake PCIE" rev 0xf6: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H
(0x5400), msi, address 88:ae:dd:01:84:96
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
xhci0 at pci0 dev 21 function 0 "Intel Gemini Lake xHCI" rev 0x06: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
sdhc0 at pci0 dev 28 function 0 "Intel Gemini Lake eMMC" rev 0x06: apic
1 int 39
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
pcib0 at pci0 dev 31 function 0 "Intel Gemini Lake LPC" rev 0x06
ichiic0 at pci0 dev 31 function 1 "Intel Gemini Lake SMBus" rev 0x06:
apic 1 int 20
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR4 SDRAM PC4-17000 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR4 SDRAM PC4-17000 SO-DIMM
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
fdc0: drive 0: unknown device type 0xf0
sdmmc0: can't enable card
ugen0 at uhub0 port 9 "Intel product 0x0aaa" rev 2.00/0.02 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (103e33e3074926f9.a) swap on sd0b dump on sd0b
WARNING: clock gained 2 days
WARNING: CHECK AND RESET THE DATE!
drm:pid0:intel_step_init *WARNING* [drm] Unknown revid 0x06
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using
wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x310, fw ver 46.4e1ceb39.0, address d4:54:8b:09:6b:ea
fdc0: drive 1: unknown device type 0xf0
I've also tried a current kernel with AZALIA_DEBUG enabled, which leads
to:
azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev
0x06: msi
azalia0: no supported codecs
azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev
0x06: msi
azalia_reset: resetting
azalia_reset: reset counter = 5000
azalia_reset: reset counter = 4985
azalia0: host: High Definition Audio rev. 1.0
azalia0: host: 6 output, 7 input, and 0 bidi streams
azalia0: found a codec at #2
azalia_init_corb: CORB allocation succeeded.
azalia_init_corb: CORBWP=0; size=256
azalia_init_rirb: RIRB allocation succeeded.
azalia_init_rirb: RIRBRP=0, size=256
azalia0: codec[2] vid 0x8086280d, subid 0x20728086, rev. 0.0, HDA
version 1.0
azalia0: nidstart=1 #functions=1
azalia_codec_init: FTYPE result = 0x00000001
azalia_codec_init: There are 2 widgets in the audio function.
azalia0: dac02 wcap=6611<POWER,DIGITAL,FORMATOV,STEREO>
azalia0: unknown03
wcap=40778d<POWER,DIGITAL,CONNLIST,UNSOL,AMPOV,OUTAMP,STEREO>
azalia_codec_sort_pins: analog out pins:
azalia_codec_sort_pins: digital out pins: 0x03->0x02
azalia_codec_sort_pins: analog in pins:
azalia_codec_sort_pins: digital in pins:
azalia0: dacgroup[0]: 02
azalia0: no supported codecs
azalia_pci_detach
azalia_pci_detach: delete streams
azalia_pci_detach: delete codecs
azalia_pci_detach: delete CORB and RIRB
azalia_pci_detach: disable interrupts
azalia_pci_detach: clear interrupts
azalia_pci_detach: delete PCI resources
--
David
No comments:
Post a Comment