Re: NFS mounted but shows nothing even df -h has it

On Wed, May 31, 2023 at 05:25:07PM +0800, Jazzi Hong wrote:
> You made the point, thank you Maksim.
> I checked /mnt/hdd and nothing there.
> > # cat /etc/fstab
> 1593ab2ee369c420.b none swap sw
> 1593ab2ee369c420.a / ffs rw 1 1
> 1593ab2ee369c420.e /var ffs rw,nodev,nosuid 1 2
> 2b6c2b5b929f9a55.i /mnt/hdd ffs rw,noexec,nosuid,nodev 0 0
> > # doas sysctl hw.disknames
> hw.disknames=sd0:2b6c2b5b929f9a55,sd1:1593ab2ee369c420
> > # doas fdisk sd0
> Disk: sd0 geometry: 121601/255/63 [1953525168 Sectors]
> Offset: 0 Signature: 0xAA55
> Starting Ending LBA Info:
> #: id C H S - C H S [ start: size ]
> -------------------------------------------------------------------------------
> 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
> 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
> 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
> *3: A6 0 1 2 - 121601 80 63 [ 64: 1953525104 ] OpenBSD
> ============
> So /dev/sd0 is my NFS share hard disk, and when I tried to mount it manually:
> > # doas mount /mnt/hdd
> mount_ffs: 2b6c2b5b929f9a55.i on /mnt/hdd: Invalid argument
> +++++++++++
> The error message mentioned about "Invalid argument" of mount, anything wrong?
> So the problem now is why can not mount the drive even it's detected?

It can detect the drive, but it doesn't find the i partition. What does
disklabel sd0 say?


--