On Sun, Nov 05, 2023 at 11:29:13AM +0100, Rafael Sadowski wrote:
> Here is a diff that deactivate libudev detection in dvdstyler and add a
> comment in libudev-openbsd.
>
> The list should then be complete, just like the list for libinput in
> wayland/libinput-openbsd. All consumers should now be patched.
>
> Comments, OK?
I'm ok with this for now.
Under X on OpenBSD nothing should to use libinput or libudev for input
handling. It's not going to work since X is reading directly from
wscons devices and not though libinput, and I've no plans to change
that.
Whether these ports need to have that support to run under Wayland
still needs to be analyzed. In the list below only consolekit looks to
me like a candidate where this may be needed. Hopefully We'll look at
this in Coimbra later this week.
>
> Rafael
>
>
> Index: sysutils/libudev-openbsd/Makefile
> ===================================================================
> RCS file: /cvs/ports/sysutils/libudev-openbsd/Makefile,v
> diff -u -p -r1.3 Makefile
> --- sysutils/libudev-openbsd/Makefile 21 Sep 2023 10:56:41 -0000 1.3
> +++ sysutils/libudev-openbsd/Makefile 5 Nov 2023 20:16:24 -0000
> @@ -1,3 +1,11 @@
> +# XXX
> +# The libudev detection has been deactivated in the following ports:
> +# x11/tigervnc
> +# devel/openmpi
> +# sysutils/consolekit
> +# multimedia/libv4l
> +# multimedia/dvdstyler
> +
> COMMENT = library to access udev device information
>
> VERSION = 20230921
> Index: multimedia/dvdstyler/Makefile
> ===================================================================
> RCS file: /cvs/ports/multimedia/dvdstyler/Makefile,v
> diff -u -p -r1.51 Makefile
> --- multimedia/dvdstyler/Makefile 27 Sep 2023 10:10:19 -0000 1.51
> +++ multimedia/dvdstyler/Makefile 5 Nov 2023 20:16:24 -0000
> @@ -2,7 +2,7 @@ COMMENT= DVD authoring application
>
> DISTNAME= DVDStyler-3.2.1
> PKGNAME= ${DISTNAME:L}
> -REVISION= 0
> +REVISION= 1
> CATEGORIES= multimedia
> SITES= ${SITE_SOURCEFORGE:=dvdstyler/}
> EXTRACT_SUFX= .tar.bz2
> Index: multimedia/dvdstyler/patches/patch-configure
> ===================================================================
> RCS file: multimedia/dvdstyler/patches/patch-configure
> diff -N multimedia/dvdstyler/patches/patch-configure
> --- /dev/null 1 Jan 1970 00:00:00 -0000
> +++ multimedia/dvdstyler/patches/patch-configure 5 Nov 2023 20:16:24 -0000
> @@ -0,0 +1,85 @@
> +Index: configure
> +--- configure.orig
> ++++ configure
> +@@ -7492,81 +7492,6 @@ fi
> + CXXFLAGS="$CXXFLAGS $FONTCONFIG_CFLAGS"
> + LIBS="$LIBS $FONTCONFIG_LIBS"
> +
> +-
> +-pkg_failed=no
> +-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libudev" >&5
> +-$as_echo_n "checking for libudev... " >&6; }
> +-
> +-if test -n "$LIBUDEV_CFLAGS"; then
> +- pkg_cv_LIBUDEV_CFLAGS="$LIBUDEV_CFLAGS"
> +- elif test -n "$PKG_CONFIG"; then
> +- if test -n "$PKG_CONFIG" && \
> +- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libudev\""; } >&5
> +- ($PKG_CONFIG --exists --print-errors "libudev") 2>&5
> +- ac_status=$?
> +- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> +- test $ac_status = 0; }; then
> +- pkg_cv_LIBUDEV_CFLAGS=`$PKG_CONFIG --cflags "libudev" 2>/dev/null`
> +- test "x$?" != "x0" && pkg_failed=yes
> +-else
> +- pkg_failed=yes
> +-fi
> +- else
> +- pkg_failed=untried
> +-fi
> +-if test -n "$LIBUDEV_LIBS"; then
> +- pkg_cv_LIBUDEV_LIBS="$LIBUDEV_LIBS"
> +- elif test -n "$PKG_CONFIG"; then
> +- if test -n "$PKG_CONFIG" && \
> +- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libudev\""; } >&5
> +- ($PKG_CONFIG --exists --print-errors "libudev") 2>&5
> +- ac_status=$?
> +- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> +- test $ac_status = 0; }; then
> +- pkg_cv_LIBUDEV_LIBS=`$PKG_CONFIG --libs "libudev" 2>/dev/null`
> +- test "x$?" != "x0" && pkg_failed=yes
> +-else
> +- pkg_failed=yes
> +-fi
> +- else
> +- pkg_failed=untried
> +-fi
> +-
> +-
> +-
> +-if test $pkg_failed = yes; then
> +- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +-$as_echo "no" >&6; }
> +-
> +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
> +- _pkg_short_errors_supported=yes
> +-else
> +- _pkg_short_errors_supported=no
> +-fi
> +- if test $_pkg_short_errors_supported = yes; then
> +- LIBUDEV_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libudev" 2>&1`
> +- else
> +- LIBUDEV_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libudev" 2>&1`
> +- fi
> +- # Put the nasty error message in config.log where it belongs
> +- echo "$LIBUDEV_PKG_ERRORS" >&5
> +-
> +- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libudev will not be used to get list of devices" >&5
> +-$as_echo "$as_me: WARNING: libudev will not be used to get list of devices" >&2;}
> +-elif test $pkg_failed = untried; then
> +- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +-$as_echo "no" >&6; }
> +- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: libudev will not be used to get list of devices" >&5
> +-$as_echo "$as_me: WARNING: libudev will not be used to get list of devices" >&2;}
> +-else
> +- LIBUDEV_CFLAGS=$pkg_cv_LIBUDEV_CFLAGS
> +- LIBUDEV_LIBS=$pkg_cv_LIBUDEV_LIBS
> +- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
> +-$as_echo "yes" >&6; }
> +- CXXFLAGS="$CXXFLAGS $LIBUDEV_CFLAGS -DHAVE_LIBUDEV";LIBS="$LIBS $LIBUDEV_LIBS"
> +-fi
> +-
> +-
> + pkg_failed=no
> + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dbus-1" >&5
> + $as_echo_n "checking for dbus-1... " >&6; }
--
Matthieu Herrb
No comments:
Post a Comment