Tuesday, July 09, 2024

Re: "intel(0): switch to mode 640x400" on Thinkpad T410

On Tue, 9 Jul 2024 10:02:40 -0000 (UTC) Stuart Henderson wrote:
> On 2024-07-08, Jan Stary <hans@stare.cz> wrote:
> > This is current/amd64 on a Thinkpad T410 (full dmesg below).
> > Strangely, upon booting, xenodm sets the resolution to 640x480:
> >
> > [ 974.100] (II) intel(0): Modeline "1440x900"x0.0 96.10 1440 1488 1552 1728 900 903 909 926 -hsync -vsync (55.6 kHz eP)
> > [ 974.100] (II) intel(0): Modeline "1440x900"x0.0 80.30 1440 1488 1552 1728 900 903 909 926 -hsync -vsync (46.5 kHz e)
> > [ 994.984] (II) intel(0): switch to mode 640x400@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
>
> shouldn't that be using modesetting rather than intel? or is the machine too old?

In my t410, even not using any xorg.conf, xenodm(1) tries to load the
intel driver, startx(1) doesn't. Notice the difference between both
Xorg.0.log files:


Running startx(1)


[ 3481.653]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 3481.654] Current Operating System: OpenBSD mamuca.roquesor.com 7.5 GENERIC.MP#174 amd64
[ 3481.654]
[ 3481.654] Current version of pixman: 0.42.2
[ 3481.655] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3481.655] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3481.657] (==) Log file: "/home/morlock/.local/share/xorg/Xorg.0.log", Time: Tue Jul 9 12:09:16 2024
[ 3481.657] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[ 3481.658] (==) No Layout section. Using the first Screen section.
[ 3481.658] (==) No screen section available. Using defaults.
[ 3481.658] (**) |-->Screen "Default Screen Section" (0)
[ 3481.658] (**) | |-->Monitor "<default monitor>"
[ 3481.658] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3481.658] (**) Allowing byte-swapped clients
[ 3481.658] (==) Automatically adding devices
[ 3481.658] (==) Automatically enabling devices
[ 3481.658] (==) Not automatically adding GPU devices
[ 3481.658] (==) Automatically binding GPU devices
[ 3481.658] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3481.658] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 3481.658] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 3481.658] (II) The server relies on wscons to provide the list of input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 3481.658] (II) Loader magic: 0xd9d14c08500
[ 3481.658] (II) Module ABI versions:
[ 3481.658] X.Org ANSI C Emulation: 0.4
[ 3481.658] X.Org Video Driver: 25.2
[ 3481.658] X.Org XInput driver : 24.4
[ 3481.658] X.Org Server Extension : 10.0
[ 3481.659] (--) Using wscons driver on /dev/ttyC4
[ 3481.692] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Permission denied)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 3481.692] linear framebuffer access unavailable
[ 3481.692] (II) LoadModule: "glx"
[ 3481.693] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 3481.696] (II) Module glx: vendor="X.Org Foundation"
[ 3481.696] compiled for 1.21.1.13, module version = 1.0.0
[ 3481.697] ABI class: X.Org Server Extension, version 10.0
[ 3481.697] (==) Matched modesetting as autoconfigured driver 0
[ 3481.697] (==) Assigned the driver to the xf86ConfigLayout
[ 3481.697] (II) LoadModule: "modesetting"
[ 3481.697] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[ 3481.698] (II) Module modesetting: vendor="X.Org Foundation"
[ 3481.698] compiled for 1.21.1.13, module version = 1.21.1
[ 3481.698] Module class: X.Org Video Driver
[ 3481.698] ABI class: X.Org Video Driver, version 25.2
[ 3481.698] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3481.698] (WW) Falling back to old probe method for modesetting
[ 3481.709] (II) modeset(0): using default device
[ 3481.709] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 3481.709] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3481.709] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 3481.709] (==) modeset(0): RGB weight 888
[ 3481.709] (==) modeset(0): Default visual is TrueColor
[ 3481.709] (II) Loading sub module "glamoregl"
[ 3481.709] (II) LoadModule: "glamoregl"
[ 3481.711] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so
[ 3481.743] (II) Module glamoregl: vendor="X.Org Foundation"
[ 3481.743] compiled for 1.21.1.13, module version = 1.0.1
[ 3481.743] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3481.830] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics (ILK)
[ 3481.830] (II) modeset(0): glamor initialized
[ 3481.830] (==) modeset(0): VariableRefresh: disabled
[ 3481.830] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 3481.830] (II) modeset(0): Output LVDS-1 has no monitor section
[ 3481.833] (II) modeset(0): Output VGA-1 has no monitor section
[ 3482.264] (II) modeset(0): Output HDMI-1 has no monitor section
[ 3482.264] (II) modeset(0): Output DP-1 has no monitor section
[ 3482.267] (II) modeset(0): Output HDMI-2 has no monitor section
[ 3482.270] (II) modeset(0): Output HDMI-3 has no monitor section
[ 3482.270] (II) modeset(0): Output DP-2 has no monitor section
[ 3482.270] (II) modeset(0): Output DP-3 has no monitor section
[ 3482.271] (II) modeset(0): EDID for output LVDS-1
[ 3482.271] (II) modeset(0): Manufacturer: LEN Model: 4035 Serial#: 0
[ 3482.271] (II) modeset(0): Year: 2009 Week: 0
[ 3482.271] (II) modeset(0): EDID Version: 1.3
[ 3482.271] (II) modeset(0): Digital Display Input
[ 3482.271] (II) modeset(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 3482.271] (II) modeset(0): Gamma: 2.20
[ 3482.271] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 3482.271] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3482.271] (II) modeset(0): First detailed timing is preferred mode
[ 3482.271] (II) modeset(0): redX: 0.590 redY: 0.340 greenX: 0.320 greenY: 0.540
[ 3482.271] (II) modeset(0): blueX: 0.155 blueY: 0.140 whiteX: 0.313 whiteY: 0.329
[ 3482.271] (II) modeset(0): Manufacturer's mask: 0
[ 3482.271] (II) modeset(0): Supported detailed timing:
[ 3482.271] (II) modeset(0): clock: 69.2 MHz Image Size: 303 x 190 mm
[ 3482.272] (II) modeset(0): h_active: 1280 h_sync: 1332 h_sync_end 1396 h_blank_end 1412 h_border: 0
[ 3482.272] (II) modeset(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 817 v_border: 0
[ 3482.272] (II) modeset(0): Supported detailed timing:
[ 3482.272] (II) modeset(0): clock: 69.2 MHz Image Size: 303 x 190 mm
[ 3482.272] (II) modeset(0): h_active: 1280 h_sync: 1332 h_sync_end 1396 h_blank_end 1595 h_border: 0
[ 3482.272] (II) modeset(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 868 v_border: 0
[ 3482.272] (II) modeset(0): Unknown vendor-specific block f
[ 3482.272] (II) modeset(0): LTN141AT15001
[ 3482.272] (II) modeset(0): EDID (in hex):
[ 3482.272] (II) modeset(0): 00ffffffffffff0030ae354000000000
[ 3482.272] (II) modeset(0): 00130103801e1378ea01f59757528a27
[ 3482.272] (II) modeset(0): 23505400000001010101010101010101
[ 3482.272] (II) modeset(0): 0101010101010a1b0084502011303440
[ 3482.272] (II) modeset(0): 33002fbe100000190a1b003b51204430
[ 3482.272] (II) modeset(0): 344033002fbe100000190000000f0081
[ 3482.272] (II) modeset(0): 0a32810a281609004ca34154000000fe
[ 3482.272] (II) modeset(0): 004c544e313431415431353030310082
[ 3482.272] (II) modeset(0): Printing probed modes for output LVDS-1
[ 3482.272] (II) modeset(0): Modeline "1280x800"x60.0 69.22 1280 1332 1396 1412 800 803 806 817 -hsync -vsync (49.0 kHz eP)
[ 3482.272] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1280x800"x50.0 69.22 1280 1332 1396 1595 800 803 806 868 -hsync -vsync (43.4 kHz e)
[ 3482.272] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3482.272] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 3482.272] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 3482.272] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 3482.272] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 3482.272] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 3482.272] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 3482.272] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 3482.272] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 3482.273] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 3482.273] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 3482.273] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 3482.273] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3482.273] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 3482.273] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 3482.273] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 3482.273] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 3482.273] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 3482.273] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 3482.273] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 3482.273] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 3482.273] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 3482.273] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 3482.273] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 3482.273] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 3482.273] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3482.273] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 3482.273] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 3482.273] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 3482.273] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 3482.273] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 3482.273] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 3482.273] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 3482.273] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 3482.273] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 3482.273] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 3482.273] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 3482.273] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 3482.273] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 3482.273] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 3482.273] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 3482.273] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 3482.273] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 3482.273] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 3482.273] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 3482.273] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 3482.273] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 3482.273] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 3482.273] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 3482.273] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 3482.275] (II) modeset(0): EDID for output VGA-1
[ 3482.709] (II) modeset(0): EDID for output HDMI-1
[ 3482.709] (II) modeset(0): EDID for output DP-1
[ 3482.711] (II) modeset(0): EDID for output HDMI-2
[ 3482.713] (II) modeset(0): EDID for output HDMI-3
[ 3482.714] (II) modeset(0): EDID for output DP-2
[ 3482.714] (II) modeset(0): EDID for output DP-3
[ 3482.714] (II) modeset(0): Output LVDS-1 connected
[ 3482.714] (II) modeset(0): Output VGA-1 disconnected
[ 3482.714] (II) modeset(0): Output HDMI-1 disconnected
[ 3482.714] (II) modeset(0): Output DP-1 disconnected
[ 3482.714] (II) modeset(0): Output HDMI-2 disconnected
[ 3482.714] (II) modeset(0): Output HDMI-3 disconnected
[ 3482.714] (II) modeset(0): Output DP-2 disconnected
[ 3482.714] (II) modeset(0): Output DP-3 disconnected
[ 3482.714] (II) modeset(0): Using exact sizes for initial modes
[ 3482.714] (II) modeset(0): Output LVDS-1 using initial mode 1280x800 +0+0
[ 3482.714] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3482.714] (--) modeset(0): Display dimensions: (303, 190) mm
[ 3482.714] (--) modeset(0): DPI set to (107, 106)
[ 3482.714] (II) Loading sub module "fb"
[ 3482.714] (II) LoadModule: "fb"
[ 3482.714] (II) Module "fb" already built-in
[ 3482.802] (==) modeset(0): Backing store enabled
[ 3482.802] (==) modeset(0): Silken mouse enabled
[ 3482.826] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 3482.826] (==) modeset(0): DPMS enabled
[ 3482.826] (II) modeset(0): [DRI2] Setup complete
[ 3482.826] (II) modeset(0): [DRI2] DRI driver: crocus
[ 3482.826] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 3482.826] (II) Initializing extension Generic Event Extension
[ 3482.827] (II) Initializing extension SHAPE
[ 3482.828] (II) Initializing extension MIT-SHM
[ 3482.828] (II) Initializing extension XInputExtension
[ 3482.829] (II) Initializing extension XTEST
[ 3482.829] (II) Initializing extension BIG-REQUESTS
[ 3482.830] (II) Initializing extension SYNC
[ 3482.830] (II) Initializing extension XKEYBOARD
[ 3482.831] (II) Initializing extension XC-MISC
[ 3482.831] (II) Initializing extension SECURITY
[ 3482.832] (II) Initializing extension XFIXES
[ 3482.833] (II) Initializing extension RENDER
[ 3482.833] (II) Initializing extension RANDR
[ 3482.834] (II) Initializing extension COMPOSITE
[ 3482.835] (II) Initializing extension DAMAGE
[ 3482.835] (II) Initializing extension MIT-SCREEN-SAVER
[ 3482.836] (II) Initializing extension DOUBLE-BUFFER
[ 3482.836] (II) Initializing extension RECORD
[ 3482.837] (II) Initializing extension DPMS
[ 3482.837] (II) Initializing extension Present
[ 3482.838] (II) Initializing extension DRI3
[ 3482.838] (II) Initializing extension X-Resource
[ 3482.839] (II) Initializing extension XVideo
[ 3482.839] (II) Initializing extension XVideo-MotionCompensation
[ 3482.839] (II) Initializing extension GLX
[ 3482.847] (II) AIGLX: Loaded and initialized crocus
[ 3482.847] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3482.847] (II) Initializing extension XFree86-VidModeExtension
[ 3482.847] (II) Initializing extension XFree86-DGA
[ 3482.848] (II) Initializing extension XFree86-DRI
[ 3482.848] (II) Initializing extension DRI2
[ 3482.849] (II) modeset(0): Damage tracking initialized
[ 3482.849] (II) modeset(0): Setting screen physical size to 303 x 190
[ 3482.915] (II) config/wscons: checking input device /dev/wskbd
[ 3482.915] (II) wskbd: using layout es
[ 3482.915] (II) LoadModule: "kbd"
[ 3482.916] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 3482.916] (II) Module kbd: vendor="X.Org Foundation"
[ 3482.916] compiled for 1.21.1.13, module version = 2.0.0
[ 3482.916] Module class: X.Org XInput Driver
[ 3482.916] ABI class: X.Org XInput driver, version 24.4
[ 3482.916] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 3482.916] (**) /dev/wskbd: always reports core events
[ 3482.917] (**) /dev/wskbd: always reports core events
[ 3482.917] (**) Option "Protocol" "standard"
[ 3482.917] (**) Option "XkbRules" "base"
[ 3482.917] (**) Option "XkbModel" "pc105"
[ 3482.917] (**) Option "XkbLayout" "es"
[ 3482.917] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 3483.487] (II) config/wscons: checking input device /dev/wsmouse0
[ 3483.487] (II) LoadModule: "ws"
[ 3483.489] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 3483.490] (II) Module ws: vendor="X.Org Foundation"
[ 3483.490] compiled for 1.21.1.13, module version = 1.3.0
[ 3483.490] Module class: X.Org XInput Driver
[ 3483.490] ABI class: X.Org XInput driver, version 24.4
[ 3483.490] (II) Using input driver 'ws' for '/dev/wsmouse0'
[ 3483.490] (**) /dev/wsmouse0: always reports core events
[ 3483.490] (II) ws: /dev/wsmouse0: debuglevel 0
[ 3483.490] (**) Option "Device" "/dev/wsmouse0"
[ 3483.490] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[ 3483.490] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[ 3483.490] (**) ws: /dev/wsmouse0: associated screen: 0
[ 3483.971] (II) ws: /dev/wsmouse0: minimum x position: 0
[ 3483.971] (II) ws: /dev/wsmouse0: maximum x position: 1279
[ 3483.971] (II) ws: /dev/wsmouse0: minimum y position: 0
[ 3483.971] (II) ws: /dev/wsmouse0: maximum y position: 799
[ 3483.971] (==) ws: /dev/wsmouse0: Buttons: 7
[ 3484.025] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[ 3484.025] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: MOUSE, id 7)
[ 3484.505] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 3484.505] (**) /dev/wsmouse0: (accel) acceleration profile 0
[ 3484.505] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 3484.505] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 3484.505] (II) config/wscons: checking input device /dev/wsmouse
[ 3484.505] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 3484.505] (**) /dev/wsmouse: always reports core events
[ 3484.505] (II) ws: /dev/wsmouse: debuglevel 0
[ 3484.505] (**) Option "Device" "/dev/wsmouse"
[ 3484.505] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 3484.505] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 3484.505] (**) ws: /dev/wsmouse: associated screen: 0
[ 3484.505] (II) ws: /dev/wsmouse: minimum x position: 0
[ 3484.505] (II) ws: /dev/wsmouse: maximum x position: 1279
[ 3484.505] (II) ws: /dev/wsmouse: minimum y position: 0
[ 3484.505] (II) ws: /dev/wsmouse: maximum y position: 799
[ 3484.505] (==) ws: /dev/wsmouse: Buttons: 7
[ 3484.505] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 3484.505] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8)
[ 3484.505] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 3484.505] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 3484.505] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 3484.505] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 3484.972] (II) modeset(0): EDID vendor "LEN", prod id 16437
[ 3484.972] (II) modeset(0): Printing DDC gathered Modelines:
[ 3484.972] (II) modeset(0): Modeline "1280x800"x0.0 69.22 1280 1332 1396 1412 800 803 806 817 -hsync -vsync (49.0 kHz eP)
[ 3484.972] (II) modeset(0): Modeline "1280x800"x0.0 69.22 1280 1332 1396 1595 800 803 806 868 -hsync -vsync (43.4 kHz e)



Running xenodm(1)


[ 3251.253] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 3251.253] linear framebuffer access unavailable
[ 3251.305] (--) Using wscons driver on /dev/ttyC4
[ 3251.343]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 3251.343] Current Operating System: OpenBSD mamuca.roquesor.com 7.5 GENERIC.MP#174 amd64
[ 3251.343]
[ 3251.343] Current version of pixman: 0.42.2
[ 3251.343] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3251.344] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3251.344] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 9 12:05:26 2024
[ 3251.344] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[ 3251.345] (==) No Layout section. Using the first Screen section.
[ 3251.345] (==) No screen section available. Using defaults.
[ 3251.345] (**) |-->Screen "Default Screen Section" (0)
[ 3251.345] (**) | |-->Monitor "<default monitor>"
[ 3251.345] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3251.345] (**) Allowing byte-swapped clients
[ 3251.345] (==) Automatically adding devices
[ 3251.345] (==) Automatically enabling devices
[ 3251.345] (==) Not automatically adding GPU devices
[ 3251.345] (==) Automatically binding GPU devices
[ 3251.345] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3251.346] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 3251.346] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 3251.346] (II) The server relies on wscons to provide the list of input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 3251.346] (II) Loader magic: 0x72186c90500
[ 3251.346] (II) Module ABI versions:
[ 3251.346] X.Org ANSI C Emulation: 0.4
[ 3251.346] X.Org Video Driver: 25.2
[ 3251.346] X.Org XInput driver : 24.4
[ 3251.346] X.Org Server Extension : 10.0
[ 3251.346] (--) PCI:*(0@1:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 3251.346] (II) LoadModule: "glx"
[ 3251.347] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 3251.351] (II) Module glx: vendor="X.Org Foundation"
[ 3251.351] compiled for 1.21.1.13, module version = 1.0.0
[ 3251.351] ABI class: X.Org Server Extension, version 10.0
[ 3251.351] (==) Matched intel as autoconfigured driver 0
[ 3251.351] (==) Matched modesetting as autoconfigured driver 1
[ 3251.351] (==) Assigned the driver to the xf86ConfigLayout
[ 3251.351] (II) LoadModule: "intel"
[ 3251.352] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 3251.361] (II) Module intel: vendor="X.Org Foundation"
[ 3251.361] compiled for 1.21.1.13, module version = 2.99.916
[ 3251.361] Module class: X.Org Video Driver
[ 3251.361] ABI class: X.Org Video Driver, version 25.2
[ 3251.361] (II) LoadModule: "modesetting"
[ 3251.362] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[ 3251.362] (II) Module modesetting: vendor="X.Org Foundation"
[ 3251.363] compiled for 1.21.1.13, module version = 1.21.1
[ 3251.363] Module class: X.Org Video Driver
[ 3251.363] ABI class: X.Org Video Driver, version 25.2
[ 3251.363] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3251.363] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 3251.363] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 3251.363] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 3251.363] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3251.374] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 3251.374] (WW) Falling back to old probe method for modesetting
[ 3251.375] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 3251.375] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 3251.375] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3251.375] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3251.375] (==) intel(0): RGB weight 888
[ 3251.375] (==) intel(0): Default visual is TrueColor
[ 3251.376] (II) intel(0): Output LVDS1 has no monitor section
[ 3251.376] (--) intel(0): Found backlight control interface wscons (type 'platform') for output LVDS1
[ 3251.376] (II) intel(0): Enabled output LVDS1
[ 3251.376] (II) intel(0): Output VGA1 has no monitor section
[ 3251.376] (II) intel(0): Enabled output VGA1
[ 3251.376] (II) intel(0): Output HDMI1 has no monitor section
[ 3251.376] (II) intel(0): Enabled output HDMI1
[ 3251.377] (II) intel(0): Output DP1 has no monitor section
[ 3251.377] (II) intel(0): Enabled output DP1
[ 3251.377] (II) intel(0): Output HDMI2 has no monitor section
[ 3251.377] (II) intel(0): Enabled output HDMI2
[ 3251.377] (II) intel(0): Output HDMI3 has no monitor section
[ 3251.377] (II) intel(0): Enabled output HDMI3
[ 3251.377] (II) intel(0): Output DP2 has no monitor section
[ 3251.377] (II) intel(0): Enabled output DP2
[ 3251.377] (II) intel(0): Output DP3 has no monitor section
[ 3251.377] (II) intel(0): Enabled output DP3
[ 3251.377] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 3251.377] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3251.377] (II) intel(0): Enabled output VIRTUAL1
[ 3251.377] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 0
[ 3251.377] (==) intel(0): TearFree disabled
[ 3251.377] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3251.377] (--) intel(0): Display dimensions: (300, 190) mm
[ 3251.377] (--) intel(0): DPI set to (108, 106)
[ 3251.377] (II) Loading sub module "dri3"
[ 3251.377] (II) LoadModule: "dri3"
[ 3251.377] (II) Module "dri3" already built-in
[ 3251.377] (II) Loading sub module "dri2"
[ 3251.377] (II) LoadModule: "dri2"
[ 3251.377] (II) Module "dri2" already built-in
[ 3251.377] (II) Loading sub module "present"
[ 3251.377] (II) LoadModule: "present"
[ 3251.377] (II) Module "present" already built-in
[ 3251.377] (II) UnloadModule: "modesetting"
[ 3251.377] (II) Unloading modesetting
[ 3251.378] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 3251.378] (==) intel(0): Backing store enabled
[ 3251.378] (==) intel(0): Silken mouse enabled
[ 3251.378] (II) intel(0): HW Cursor enabled
[ 3251.379] (==) intel(0): DPMS enabled
[ 3251.380] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 3251.380] (II) intel(0): [DRI2] Setup complete
[ 3251.380] (II) intel(0): [DRI2] DRI driver: i965
[ 3251.380] (II) intel(0): [DRI2] VDPAU driver: i965
[ 3251.380] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 3251.380] (II) intel(0): hardware support for Present enabled
[ 3251.380] (II) Initializing extension Generic Event Extension
[ 3251.380] (II) Initializing extension SHAPE
[ 3251.381] (II) Initializing extension MIT-SHM
[ 3251.381] (II) Initializing extension XInputExtension
[ 3251.382] (II) Initializing extension XTEST
[ 3251.382] (II) Initializing extension BIG-REQUESTS
[ 3251.382] (II) Initializing extension SYNC
[ 3251.383] (II) Initializing extension XKEYBOARD
[ 3251.383] (II) Initializing extension XC-MISC
[ 3251.384] (II) Initializing extension SECURITY
[ 3251.384] (II) Initializing extension XFIXES
[ 3251.384] (II) Initializing extension RENDER
[ 3251.385] (II) Initializing extension RANDR
[ 3251.386] (II) Initializing extension COMPOSITE
[ 3251.386] (II) Initializing extension DAMAGE
[ 3251.386] (II) Initializing extension MIT-SCREEN-SAVER
[ 3251.387] (II) Initializing extension DOUBLE-BUFFER
[ 3251.387] (II) Initializing extension RECORD
[ 3251.388] (II) Initializing extension DPMS
[ 3251.388] (II) Initializing extension Present
[ 3251.388] (II) Initializing extension DRI3
[ 3251.389] (II) Initializing extension X-Resource
[ 3251.389] (II) Initializing extension XVideo
[ 3251.389] (II) Initializing extension XVideo-MotionCompensation
[ 3251.390] (II) Initializing extension GLX
[ 3251.391] (EE) AIGLX error: dlopen of /usr/X11R6/lib/modules/dri/i965_dri.so failed (File not found)
[ 3251.391] (EE) AIGLX error: unable to load driver i965
[ 3251.442] (II) IGLX: Loaded and initialized swrast
[ 3251.442] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 3251.442] (II) Initializing extension XFree86-VidModeExtension
[ 3251.443] (II) Initializing extension XFree86-DGA
[ 3251.443] (II) Initializing extension XFree86-DRI
[ 3251.443] (II) Initializing extension DRI2
[ 3251.451] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3251.473] (II) intel(0): Setting screen physical size to 300 x 190
[ 3251.521] (II) config/wscons: checking input device /dev/wskbd
[ 3251.521] (II) wskbd: using layout es
[ 3251.521] (II) LoadModule: "kbd"
[ 3251.523] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 3251.523] (II) Module kbd: vendor="X.Org Foundation"
[ 3251.523] compiled for 1.21.1.13, module version = 2.0.0
[ 3251.523] Module class: X.Org XInput Driver
[ 3251.523] ABI class: X.Org XInput driver, version 24.4
[ 3251.523] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 3251.523] (**) /dev/wskbd: always reports core events
[ 3251.523] (**) /dev/wskbd: always reports core events
[ 3251.523] (**) Option "Protocol" "standard"
[ 3251.523] (**) Option "XkbRules" "base"
[ 3251.523] (**) Option "XkbModel" "pc105"
[ 3251.523] (**) Option "XkbLayout" "es"
[ 3251.523] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 3252.092] (II) config/wscons: checking input device /dev/wsmouse0
[ 3252.092] (II) LoadModule: "ws"
[ 3252.094] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 3252.094] (II) Module ws: vendor="X.Org Foundation"
[ 3252.094] compiled for 1.21.1.13, module version = 1.3.0
[ 3252.095] Module class: X.Org XInput Driver
[ 3252.095] ABI class: X.Org XInput driver, version 24.4
[ 3252.095] (II) Using input driver 'ws' for '/dev/wsmouse0'
[ 3252.095] (**) /dev/wsmouse0: always reports core events
[ 3252.095] (II) ws: /dev/wsmouse0: debuglevel 0
[ 3252.095] (**) Option "Device" "/dev/wsmouse0"
[ 3252.095] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[ 3252.095] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[ 3252.095] (**) ws: /dev/wsmouse0: associated screen: 0
[ 3252.576] (II) ws: /dev/wsmouse0: minimum x position: 0
[ 3252.576] (II) ws: /dev/wsmouse0: maximum x position: 1279
[ 3252.576] (II) ws: /dev/wsmouse0: minimum y position: 0
[ 3252.576] (II) ws: /dev/wsmouse0: maximum y position: 799
[ 3252.576] (==) ws: /dev/wsmouse0: Buttons: 7
[ 3252.634] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[ 3252.634] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: MOUSE, id 7)
[ 3253.117] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 3253.117] (**) /dev/wsmouse0: (accel) acceleration profile 0
[ 3253.117] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 3253.117] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 3253.117] (II) config/wscons: checking input device /dev/wsmouse
[ 3253.117] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 3253.117] (**) /dev/wsmouse: always reports core events
[ 3253.117] (II) ws: /dev/wsmouse: debuglevel 0
[ 3253.117] (**) Option "Device" "/dev/wsmouse"
[ 3253.117] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 3253.117] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 3253.117] (**) ws: /dev/wsmouse: associated screen: 0
[ 3253.117] (II) ws: /dev/wsmouse: minimum x position: 0
[ 3253.117] (II) ws: /dev/wsmouse: maximum x position: 1279
[ 3253.117] (II) ws: /dev/wsmouse: minimum y position: 0
[ 3253.117] (II) ws: /dev/wsmouse: maximum y position: 799
[ 3253.117] (==) ws: /dev/wsmouse: Buttons: 7
[ 3253.117] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 3253.117] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8)
[ 3253.118] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 3253.118] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 3253.118] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 3253.118] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 3260.638] (II) intel(0): EDID vendor "LEN", prod id 16437
[ 3260.638] (II) intel(0): Printing DDC gathered Modelines:
[ 3260.638] (II) intel(0): Modeline "1280x800"x0.0 69.22 1280 1332 1396 1412 800 803 806 817 -hsync -vsync (49.0 kHz eP)
[ 3260.638] (II) intel(0): Modeline "1280x800"x0.0 69.22 1280 1332 1396 1595 800 803 806 868 -hsync -vsync (43.4 kHz e)
[ 3365.155] (II) UnloadModule: "ws"
[ 3365.156] (II) UnloadModule: "ws"
[ 3365.156] (II) UnloadModule: "kbd"
[ 3365.189] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 3365.189] (II) intel(0): HW Cursor enabled
[ 3365.226] (==) intel(0): DPMS enabled
[ 3365.226] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 3365.226] (II) intel(0): [DRI2] Setup complete
[ 3365.226] (II) intel(0): [DRI2] DRI driver: i965
[ 3365.226] (II) intel(0): [DRI2] VDPAU driver: i965
[ 3365.226] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 3365.226] (II) intel(0): hardware support for Present enabled
[ 3365.226] (II) Initializing extension Generic Event Extension
[ 3365.226] (II) Initializing extension SHAPE
[ 3365.227] (II) Initializing extension MIT-SHM
[ 3365.227] (II) Initializing extension XInputExtension
[ 3365.228] (II) Initializing extension XTEST
[ 3365.229] (II) Initializing extension BIG-REQUESTS
[ 3365.229] (II) Initializing extension SYNC
[ 3365.230] (II) Initializing extension XKEYBOARD
[ 3365.230] (II) Initializing extension XC-MISC
[ 3365.231] (II) Initializing extension SECURITY
[ 3365.231] (II) Initializing extension XFIXES
[ 3365.232] (II) Initializing extension RENDER
[ 3365.232] (II) Initializing extension RANDR
[ 3365.233] (II) Initializing extension COMPOSITE
[ 3365.234] (II) Initializing extension DAMAGE
[ 3365.234] (II) Initializing extension MIT-SCREEN-SAVER
[ 3365.234] (II) Initializing extension DOUBLE-BUFFER
[ 3365.235] (II) Initializing extension RECORD
[ 3365.235] (II) Initializing extension DPMS
[ 3365.236] (II) Initializing extension Present
[ 3365.236] (II) Initializing extension DRI3
[ 3365.237] (II) Initializing extension X-Resource
[ 3365.237] (II) Initializing extension XVideo
[ 3365.238] (II) Initializing extension XVideo-MotionCompensation
[ 3365.238] (II) Initializing extension GLX
[ 3365.239] (EE) AIGLX error: dlopen of /usr/X11R6/lib/modules/dri/i965_dri.so failed (File not found)
[ 3365.239] (EE) AIGLX error: unable to load driver i965
[ 3365.291] (II) IGLX: Loaded and initialized swrast
[ 3365.291] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 3365.291] (II) Initializing extension XFree86-VidModeExtension
[ 3365.292] (II) Initializing extension XFree86-DGA
[ 3365.292] (II) Initializing extension XFree86-DRI
[ 3365.292] (II) Initializing extension DRI2
[ 3365.299] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3365.342] (II) intel(0): Setting screen physical size to 303 x 190
[ 3365.393] (II) config/wscons: checking input device /dev/wskbd
[ 3365.393] (II) wskbd: using layout es
[ 3365.393] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 3365.393] (**) /dev/wskbd: always reports core events
[ 3365.393] (**) /dev/wskbd: always reports core events
[ 3365.393] (**) Option "Protocol" "standard"
[ 3365.393] (**) Option "XkbRules" "base"
[ 3365.393] (**) Option "XkbModel" "pc105"
[ 3365.393] (**) Option "XkbLayout" "es"
[ 3365.965] (II) config/wscons: checking input device /dev/wsmouse0
[ 3365.966] (II) Using input driver 'ws' for '/dev/wsmouse0'
[ 3365.966] (**) /dev/wsmouse0: always reports core events
[ 3365.966] (II) ws: /dev/wsmouse0: debuglevel 0
[ 3365.966] (**) Option "Device" "/dev/wsmouse0"
[ 3365.966] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[ 3365.966] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[ 3365.966] (**) ws: /dev/wsmouse0: associated screen: 0
[ 3366.444] (II) ws: /dev/wsmouse0: minimum x position: 0
[ 3366.444] (II) ws: /dev/wsmouse0: maximum x position: 1279
[ 3366.444] (II) ws: /dev/wsmouse0: minimum y position: 0
[ 3366.444] (II) ws: /dev/wsmouse0: maximum y position: 799
[ 3366.444] (==) ws: /dev/wsmouse0: Buttons: 7
[ 3366.501] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[ 3366.979] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 3366.980] (**) /dev/wsmouse0: (accel) acceleration profile 0
[ 3366.980] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 3366.980] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 3366.980] (II) config/wscons: checking input device /dev/wsmouse
[ 3366.980] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 3366.980] (**) /dev/wsmouse: always reports core events
[ 3366.980] (II) ws: /dev/wsmouse: debuglevel 0
[ 3366.980] (**) Option "Device" "/dev/wsmouse"
[ 3366.980] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 3366.980] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 3366.980] (**) ws: /dev/wsmouse: associated screen: 0
[ 3366.981] (II) ws: /dev/wsmouse: minimum x position: 0
[ 3366.981] (II) ws: /dev/wsmouse: maximum x position: 1279
[ 3366.981] (II) ws: /dev/wsmouse: minimum y position: 0
[ 3366.981] (II) ws: /dev/wsmouse: maximum y position: 799
[ 3366.981] (==) ws: /dev/wsmouse: Buttons: 7
[ 3366.981] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 3366.981] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 3366.981] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 3366.981] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 3366.981] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 3373.163] (II) UnloadModule: "ws"
[ 3373.164] (II) UnloadModule: "ws"
[ 3373.164] (II) UnloadModule: "kbd"
[ 3373.198] (II) Server terminated successfully (0). Closing log file.


My dmesg:

OpenBSD 7.5-current (GENERIC.MP) #174: Mon Jul 8 12:37:42 MDT 2024
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 6210174976 (5922MB)
avail mem = 5998809088 (5720MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6IET85WW (1.45 )" date 02/14/2013
bios0: LENOVO 2537EY8
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA DMAR SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.20 MHz, 06-25-02, patch 00000011
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=298e3ff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES>
cpu0: cpuid 6 eax=7<SENSOR,ARAT> ecx=1<EFFFREQ>
cpu0: cpuid 7.0 edx=9c000000<IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=1<LAHF>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 4-way I-cache, 256KB 64b/line 8-way L2 cache, 3MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.28 MHz, 06-25-02, patch 00000011
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.29 MHz, 06-25-02, patch 00000011
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.70 MHz, 06-25-02, patch 00000011
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 13 (EXP5)
acpibtn0 at acpi0: LID_(wakeup)
acpibtn1 at acpi0: SLPB(wakeup)
acpipci0 at acpi0 UNCR
acpipci1 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "42T4848" serial 7058 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"*pnp0c14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 100 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using IvyBridge MDS workaround
cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2534, 2533, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 255
pchb0 at pci0 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb1 at pci0 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb2 at pci0 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb3 at pci0 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb4 at pci0 dev 2 function 2 "Intel Reserved" rev 0x02
pchb5 at pci0 dev 2 function 3 "Intel Reserved" rev 0x02
pci1 at mainbus0 bus 0
pchb6 at pci1 dev 0 function 0 "Intel Core Host" rev 0x02
inteldrm0 at pci1 dev 2 function 0 "Intel HD Graphics" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi, IRONLAKE, gen 5
"Intel 3400 MEI" rev 0x06 at pci1 dev 22 function 0 not configured
em0 at pci1 dev 25 function 0 "Intel 82577LM" rev 0x06: msi, address f0:de:f1:05:03:50
ehci0 at pci1 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci1 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci1 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb0 bus 2
ppb1 at pci1 dev 28 function 1 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb1 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi, MIMO 2T2R, MoW, address 00:27:10:1c:5e:30
ppb2 at pci1 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci4 at ppb2 bus 5
ppb3 at pci1 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci5 at ppb3 bus 13
sdhc0 at pci5 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x01: apic 1 int 16
sdhc0: SDHC 1.00, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"Ricoh 5U230 Memory Stick" rev 0x01 at pci5 dev 0 function 1 not configured
"Ricoh 5U832 Firewire" rev 0x01 at pci5 dev 0 function 3 not configured
ehci1 at pci1 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci1 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci6 at ppb4 bus 14
pcib0 at pci1 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci1 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS725050A7, GH2O> naa.5000cca81bc5a943
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci1 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
itherm0 at pci1 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev 2.00/3.60 addr 3
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/23.45 addr 4
video0 at uvideo0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (940ad1d2995f240e.a) swap on sd0b dump on sd0b
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... done
rebooting...
OpenBSD 7.5-current (GENERIC.MP) #174: Mon Jul 8 12:37:42 MDT 2024
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 6210174976 (5922MB)
avail mem = 5998784512 (5720MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6IET85WW (1.45 )" date 02/14/2013
bios0: LENOVO 2537EY8
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA DMAR SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.16 MHz, 06-25-02, patch 00000011
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=298e3ff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES>
cpu0: cpuid 6 eax=7<SENSOR,ARAT> ecx=1<EFFFREQ>
cpu0: cpuid 7.0 edx=9c000000<IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=1<LAHF>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 4-way I-cache, 256KB 64b/line 8-way L2 cache, 3MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.31 MHz, 06-25-02, patch 00000011
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.29 MHz, 06-25-02, patch 00000011
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.72 MHz, 06-25-02, patch 00000011
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 13 (EXP5)
acpibtn0 at acpi0: LID_(wakeup)
acpibtn1 at acpi0: SLPB(wakeup)
acpipci0 at acpi0 UNCR
acpipci1 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "42T4848" serial 7058 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"*pnp0c14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 100 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using IvyBridge MDS workaround
cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2534, 2533, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 255
pchb0 at pci0 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb1 at pci0 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb2 at pci0 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb3 at pci0 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb4 at pci0 dev 2 function 2 "Intel Reserved" rev 0x02
pchb5 at pci0 dev 2 function 3 "Intel Reserved" rev 0x02
pci1 at mainbus0 bus 0
pchb6 at pci1 dev 0 function 0 "Intel Core Host" rev 0x02
inteldrm0 at pci1 dev 2 function 0 "Intel HD Graphics" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi, IRONLAKE, gen 5
"Intel 3400 MEI" rev 0x06 at pci1 dev 22 function 0 not configured
em0 at pci1 dev 25 function 0 "Intel 82577LM" rev 0x06: msi, address f0:de:f1:05:03:50
ehci0 at pci1 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci1 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci1 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb0 bus 2
ppb1 at pci1 dev 28 function 1 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb1 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi, MIMO 2T2R, MoW, address 00:27:10:1c:5e:30
ppb2 at pci1 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci4 at ppb2 bus 5
ppb3 at pci1 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci5 at ppb3 bus 13
sdhc0 at pci5 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x01: apic 1 int 16
sdhc0: SDHC 1.00, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"Ricoh 5U230 Memory Stick" rev 0x01 at pci5 dev 0 function 1 not configured
"Ricoh 5U832 Firewire" rev 0x01 at pci5 dev 0 function 3 not configured
ehci1 at pci1 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci1 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci6 at ppb4 bus 14
pcib0 at pci1 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci1 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS725050A7, GH2O> naa.5000cca81bc5a943
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci1 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
itherm0 at pci1 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev 2.00/3.60 addr 3
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/23.45 addr 4
video0 at uvideo0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (940ad1d2995f240e.a) swap on sd0b dump on sd0b
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
umass0 at uhub3 port 2 configuration 1 interface 0 "TOSHIBA External USB 3.0" rev 2.10/0.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <TOSHIBA, External USB 3.0, 0> serial.0480a20060417011533F
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
sd1 detached
scsibus4 detached
umass0 detached
syncing disks... done
rebooting...
OpenBSD 7.5-current (GENERIC.MP) #174: Mon Jul 8 12:37:42 MDT 2024
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 6210174976 (5922MB)
avail mem = 5998792704 (5720MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6IET85WW (1.45 )" date 02/14/2013
bios0: LENOVO 2537EY8
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA DMAR SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.20 MHz, 06-25-02, patch 00000011
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=298e3ff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES>
cpu0: cpuid 6 eax=7<SENSOR,ARAT> ecx=1<EFFFREQ>
cpu0: cpuid 7.0 edx=9c000000<IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=1<LAHF>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 4-way I-cache, 256KB 64b/line 8-way L2 cache, 3MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.29 MHz, 06-25-02, patch 00000011
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.23 MHz, 06-25-02, patch 00000011
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2793.75 MHz, 06-25-02, patch 00000011
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 13 (EXP5)
acpibtn0 at acpi0: LID_(wakeup)
acpibtn1 at acpi0: SLPB(wakeup)
acpipci0 at acpi0 UNCR
acpipci1 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "42T4848" serial 7058 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"*pnp0c14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10), C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 100 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using IvyBridge MDS workaround
cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2534, 2533, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 255
pchb0 at pci0 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb1 at pci0 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb2 at pci0 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb3 at pci0 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb4 at pci0 dev 2 function 2 "Intel Reserved" rev 0x02
pchb5 at pci0 dev 2 function 3 "Intel Reserved" rev 0x02
pci1 at mainbus0 bus 0
pchb6 at pci1 dev 0 function 0 "Intel Core Host" rev 0x02
inteldrm0 at pci1 dev 2 function 0 "Intel HD Graphics" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi, IRONLAKE, gen 5
"Intel 3400 MEI" rev 0x06 at pci1 dev 22 function 0 not configured
em0 at pci1 dev 25 function 0 "Intel 82577LM" rev 0x06: msi, address f0:de:f1:05:03:50
ehci0 at pci1 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci1 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci1 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb0 bus 2
ppb1 at pci1 dev 28 function 1 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb1 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev 0x35: msi, MIMO 2T2R, MoW, address 00:27:10:1c:5e:30
ppb2 at pci1 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci4 at ppb2 bus 5
ppb3 at pci1 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci5 at ppb3 bus 13
sdhc0 at pci5 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x01: apic 1 int 16
sdhc0: SDHC 1.00, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"Ricoh 5U230 Memory Stick" rev 0x01 at pci5 dev 0 function 1 not configured
"Ricoh 5U832 Firewire" rev 0x01 at pci5 dev 0 function 3 not configured
ehci1 at pci1 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci1 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci6 at ppb4 bus 14
pcib0 at pci1 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci1 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS725050A7, GH2O> naa.5000cca81bc5a943
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci1 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
itherm0 at pci1 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev 2.00/3.60 addr 3
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/23.45 addr 4
video0 at uvideo0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (940ad1d2995f240e.a) swap on sd0b dump on sd0b
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)


--
Walter

No comments:

Post a Comment