On Tue, Aug 27, 2024 at 02:18:29AM -0400, openbsd_freak@mail2tor.com wrote:
> I cannot install OpenBSD using flash usb media. The installer stops at
> (disk, http, nfs etc). After partioning. The install USB boots up and
> everythings goes well until I reach the part with the data sets.
>
> The installer cannot find usb media.
>
Unplug and plug the USB media back on, and see if the console spits out
the device, something like:
sd4 at scsibus5 targ 1 lun 0: <Kingston, DataTraveler 3.0, > ...
Then enter "!" on the installer prompt to drop to a shell, check if the
node exists in /dev (e.g. "ls /dev/sd4*", change sd4 to whatever is
relevant in your case) and if it doesn't, create it using MAKEDEV (e.g.:
"cd /dev; sh ./MAKEDEV sd4").
Exit the shell to get back to the installer and see if the media is
now detected.
(caveat: commands above were written from memory, might not be 100%
correct)
--
No comments:
Post a Comment