Saturday, August 03, 2024

RockPro64 with Intel I225V Nic

Hi OpenBSD folks,

Im having issue with an Intel I225-V dual port NIC and Rockpro64,
the card isn't being detected despite the kernel detects pci0,1,2 devices.

Since the card itself is supported according to igc(4) I guess its a problem on the Rockpro64 board?
I only need a single or dual-port card, any idea what other card I could use?

Or is there a solution?

Below I copy a dimesg output.

Regards,

Georg

————————————————— snip —————————————————

OpenBSD 7.5 (GENERIC.MP) #138: Wed Mar 20 19:42:15 MDT 2024

    deraadt@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP

real mem  = 4123770880 (3932MB)

avail mem = 3912286208 (3731MB)

random: good seed from bootblocks

mainbus0 at root: Pine64 RockPro64 v2.1

psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND

efi0 at mainbus0: UEFI 2.10

efi0: Das U-Boot rev 0x20240700

smbios0 at efi0: SMBIOS 3.7.0

smbios0: vendor U-Boot version "2024.07" date 07/01/2024

smbios0: Pine64 RockPro64

cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4

cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache

cpu0: 512KB 64b/line 16-way L2 cache

cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16

cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4

cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache

cpu1: 512KB 64b/line 16-way L2 cache

cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4

cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache

cpu2: 512KB 64b/line 16-way L2 cache

cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4

cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache

cpu3: 512KB 64b/line 16-way L2 cache

cpu4 at mainbus0 mpidr 100: ARM Cortex-A72 r0p2

cpu4: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache

cpu4: 1024KB 64b/line 16-way L2 cache

cpu4: CRC32,SHA2,SHA1,AES+PMULL,ASID16

cpu5 at mainbus0 mpidr 101: ARM Cortex-A72 r0p2

cpu5: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache

cpu5: 1024KB 64b/line 16-way L2 cache

apm0 at mainbus0

agintc0 at mainbus0 sec shift 3:3 nirq 288 nredist 6 ipi: 0, 1, 2: "interrupt-controller"

agintcmsi0 at agintc0

syscon0 at mainbus0: "qos"

syscon1 at mainbus0: "qos"

syscon2 at mainbus0: "qos"

syscon3 at mainbus0: "qos"

syscon4 at mainbus0: "qos"

syscon5 at mainbus0: "qos"

syscon6 at mainbus0: "qos"

syscon7 at mainbus0: "qos"

syscon8 at mainbus0: "qos"

syscon9 at mainbus0: "qos"

syscon10 at mainbus0: "qos"

syscon11 at mainbus0: "qos"

syscon12 at mainbus0: "qos"

syscon13 at mainbus0: "qos"

syscon14 at mainbus0: "qos"

syscon15 at mainbus0: "qos"

syscon16 at mainbus0: "qos"

syscon17 at mainbus0: "qos"

syscon18 at mainbus0: "qos"

syscon19 at mainbus0: "qos"

syscon20 at mainbus0: "qos"

syscon21 at mainbus0: "qos"

syscon22 at mainbus0: "qos"

syscon23 at mainbus0: "qos"

syscon24 at mainbus0: "qos"

syscon25 at mainbus0: "power-management"

"power-controller" at syscon25 not configured

syscon26 at mainbus0: "syscon"

"io-domains" at syscon26 not configured

rkclock0 at mainbus0

rkclock1 at mainbus0

rkclock_set_frequency(rkclock1, 237, 400000000)

syscon27 at mainbus0: "syscon"

"io-domains" at syscon27 not configured

"usb2phy" at syscon27 not configured

"usb2phy" at syscon27 not configured

rkemmcphy0 at syscon27

"pcie-phy" at syscon27 not configured

rktcphy0 at mainbus0

rktcphy1 at mainbus0

rkpinctrl0 at mainbus0: "pinctrl"

rkgpio0 at rkpinctrl0

rkgpio1 at rkpinctrl0

rkgpio2 at rkpinctrl0

rkgpio3 at rkpinctrl0

rkgpio4 at rkpinctrl0

pwmreg0 at mainbus0

syscon28 at mainbus0: "syscon"

syscon29 at mainbus0: "syscon"

"fit-images" at mainbus0 not configured

rkdrm0 at mainbus0

drm0 at rkdrm0

"memory-controller" at mainbus0 not configured

"pmu_a53" at mainbus0 not configured

"pmu_a72" at mainbus0 not configured

agtimer0 at mainbus0: 24000 kHz

"xin24m" at mainbus0 not configured

rkpcie0 at mainbus0

pci0 at rkpcie0

ppb0 at pci0 dev 0 function 0 "Rockchip RK3399" rev 0x00: msi

pci1 at ppb0 bus 1

ppb1 at pci1 dev 0 function 0 "ASMedia ASM1182e" rev 0x00

pci2 at ppb1 bus 2

dwge0 at mainbus0: rev 0x35, address ba:70:1f:33:87:d9

rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6

dwmmc0 at mainbus0: 50 MHz base clock

sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma

dwmmc1 at mainbus0: 50 MHz base clock

sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma

sdhc0 at mainbus0

sdhc0: SDHC 3.00, 200 MHz base clock

sdmmc2 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma

ehci0 at mainbus0

usb0 at ehci0: USB revision 2.0

uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1

ohci0 at mainbus0: version 1.0

ehci1 at mainbus0

usb1 at ehci1: USB revision 2.0

uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1

ohci1 at mainbus0: version 1.0

"debug" at mainbus0 not configured

"debug" at mainbus0 not configured

"debug" at mainbus0 not configured

"debug" at mainbus0 not configured

"debug" at mainbus0 not configured

"debug" at mainbus0 not configured

rkdwusb0 at mainbus0: "usb"

xhci0 at rkdwusb0, xHCI 1.10

usb2 at xhci0: USB revision 3.0

uhub2 at usb2 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1

rkdwusb1 at mainbus0: "usb"

xhci1 at rkdwusb1, xHCI 1.10

usb3 at xhci1: USB revision 3.0

uhub3 at usb3 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1

"saradc" at mainbus0 not configured

rkrng0 at mainbus0: ver 1

rkrng1 at mainbus0: ver 1

rkiic0 at mainbus0

iic0 at rkiic0

escodec0 at iic0 addr 0x11

rkiic1 at mainbus0

iic1 at rkiic1

com0 at mainbus0: dw16550, 64 byte fifo

com1 at mainbus0: dw16550, 64 byte fifo

com1: console

rkspi0 at mainbus0

rktemp0 at mainbus0

rkiic2 at mainbus0

iic2 at rkiic2

rkpmic0 at iic2 addr 0x1b: RK808

fanpwr0 at iic2 addr 0x40: SYR827, 1.00 VDC

fanpwr1 at iic2 addr 0x41: SYR828, 1.00 VDC

rkiic3 at mainbus0

iic3 at rkiic3

fusbtc0 at iic3 addr 0x22

rkpwm0 at mainbus0

rkpwm1 at mainbus0

rkpwm2 at mainbus0

"dfi" at mainbus0 not configured

"video-codec" at mainbus0 not configured

"iommu" at mainbus0 not configured

"video-codec" at mainbus0 not configured

"iommu" at mainbus0 not configured

"rga" at mainbus0 not configured

"efuse" at mainbus0 not configured

"dma-controller" at mainbus0 not configured

"dma-controller" at mainbus0 not configured

"watchdog" at mainbus0 not configured

"rktimer" at mainbus0 not configured

rkiis0 at mainbus0

rkiis1 at mainbus0

rkiis2 at mainbus0

rkvop0 at mainbus0: RK3399 VOPL

"iommu" at mainbus0 not configured

rkvop1 at mainbus0: RK3399 VOPB

"iommu" at mainbus0 not configured

"iommu" at mainbus0 not configured

"iommu" at mainbus0 not configured

simpleaudio0 at mainbus0

rkdwhdmi0 at mainbus0: HDMI TX

rkdwhdmi0: version 2.11a, phytype 0xf3

"gpu" at mainbus0 not configured

"opp-table-0" at mainbus0 not configured

"opp-table-1" at mainbus0 not configured

"opp-table-2" at mainbus0 not configured

"external-gmac-clock" at mainbus0 not configured

gpiokeys0 at mainbus0: "GPIO Key Power"

"ir-receiver" at mainbus0 not configured

gpioleds0 at mainbus0: "work", "diy"

pwmfan0 at mainbus0

"sdio-pwrseq" at mainbus0 not configured

graphaudio0 at mainbus0

graphaudio1 at mainbus0

"spdif-dit" at mainbus0 not configured

"avdd-regulator" at mainbus0 not configured

"vcc12v-dcin" at mainbus0 not configured

"vcc1v8-s3" at mainbus0 not configured

"vcc3v0-sd" at mainbus0 not configured

"vcc3v3-pcie-regulator" at mainbus0 not configured

"vcc3v3-sys" at mainbus0 not configured

"vcc5v0-host-regulator" at mainbus0 not configured

"vcc5v0-typec-regulator" at mainbus0 not configured

"vcc5v0-sys" at mainbus0 not configured

"vcc5v0-usb" at mainbus0 not configured

"binman" at mainbus0 not configured

"smbios" at mainbus0 not configured

usb4 at ohci0: USB revision 1.0

uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1

usb5 at ohci1: USB revision 1.0

uhub5 at usb5 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1

audio0 at graphaudio0

sdmmc0: can't enable card

scsibus0 at sdmmc2: 2 targets, initiator 0

sd0 at scsibus0 targ 1 lun 0: <Sandisk, DA4032, 0000> removable

sd0: 29820MB, 512 bytes/sector, 61071360 sectors

vscsi0 at root

scsibus1 at vscsi0: 256 targets

softraid0 at root

scsibus2 at softraid0: 256 targets

root on sd0a (20b03047b1ce77e8.a) swap on sd0b dump on sd0b

WARNING: bad clock chip time

WARNING: CHECK AND RESET THE DATE!

rkvop0: using CRTC 0 for RK3399 VOPL

rkvop1: using CRTC 1 for RK3399 VOPB

drm:pid0:drm_fb_helper_find_format *WARNING* [drm] bpp/depth value of 32/24 not supported

drm:pid0:drm_fb_helper_find_format *WARNING* [drm] bpp/depth value of 32/24 not supported

drm:pid0:__drm_fb_helper_find_sizes *WARNING* [drm] No compatible format found

rkdrm0: 1024x768, 32bpp

wsdisplay0 at rkdrm0 mux 1

wsdisplay0: screen 0-5 added (std, vt100 emulation)

————————————————— snip —————————————————




No comments:

Post a Comment