On 9/18/24 9:04 AM, Stuart Henderson wrote:
> On 2024/09/18 08:58, Byron Campbell - WA4GEG wrote:
>> VLC 3.0.20p4
>>
>> Problem: VLC will not play the video of an MP4 and shows only a black
>> screen, however the audio of the MP4 plays just fine.
>
> Works fine here on latest amd64 snapshot (base and packages all updated)
> with a randomly chosen mp4 file.
>
>> Problem: VLC will immediately crash when attempting to play a DVD.
>
> I have no way to test that. "Will immediately crash" isn't very helpful,
> at least show the output (start vlc from a console and copy and paste
> the lot), get a backtrace if there's a coredump.
>
> Are you using any of the va-api stuff?
>
> What display adapter? dmesg wouldn't hurt.
>
Tnx Stuart, dmesg below at bottom. This machine was upgraded from 7.4,
then 7.5, and now 7.6-beta. Nothing special, bare install with x, mate,
and a few packages; Geany, FireFox, Thunderbird, libre-office. Probably
time to start again with clean slate / fresh install.
Okay, launched VLC from terminal. Here's the output when attempting to
play an MP4, and audio plays but not the video portion:
$ vlc
VLC media player 3.0.20 Vetinari (revision 3.0.20-0-g6f0d0ab126b)
[00000d0660d53220] main libvlc: Running vlc with the default interface.
Use 'cvlc' to use vlc without interface.
[00000d0660d64ca0] main playlist: playlist is empty
libva info: VA-API version 1.22.0
libva info: Trying to open /usr/X11R6/lib/modules/dri/r600_drv_video.so
libva info: Found init function __vaDriverInit_1_22
libva info: va_openDriver() returns 0
[00000d06e842d060] avcodec decoder: Using Mesa Gallium driver 23.3.6 for
AMD CEDAR (DRM 2.50.0 / 7.6, LLVM 16.0.6) for hardware decoding
bsd$
Launched VLC from terminal. Here's the output when attempting to play a
DVD; seg-faults:
$ vlc
VLC media player 3.0.20 Vetinari (revision 3.0.20-0-g6f0d0ab126b)
[000007a0a6f13680] main libvlc: Running vlc with the default interface.
Use 'cvlc' to use vlc without interface.
[000007a076d3a060] main playlist: playlist is empty
[000007a02a5b9360] dvdnav demux: DVD Title: EFV1 INTRO NTSC
[000007a02a5b9360] dvdnav demux: DVD Serial Number: 529049f1f1bbe9C
[000007a02a5b9360] dvdnav demux: DVD Title (Alternative):
[000007a02a5b9360] dvdnav demux: DVD disk reports itself with Region
mask 0x00000000. Regions: 01 02 03 04 05 06 07 08
[000007a02a5b9360] dvdnav demux: Attempting to retrieve all CSS keys
[000007a02a5b9360] dvdnav demux: This can take a _long_ time, please be
patient
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
[000007a02a5b9360] dvdnav demux error: Unable to read invalid PCG
libva info: VA-API version 1.22.0
libva info: Trying to open /usr/X11R6/lib/modules/dri/r600_drv_video.so
libva info: Found init function __vaDriverInit_1_22
libva info: va_openDriver() returns 0
[0000079fed6aaae0] avcodec decoder: Using Mesa Gallium driver 23.3.6 for
AMD CEDAR (DRM 2.50.0 / 7.6, LLVM 16.0.6) for hardware decoding
Segmentation fault (core dumped)
$
=============================== dmesg ==================================
OpenBSD 7.6 (GENERIC.MP) #317: Tue Sep 17 09:26:21 MDT 2024
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34246139904 (32659MB)
avail mem = 33184604160 (31647MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xcb6d1000 (76 entries)
bios0: vendor Hewlett-Packard version "M60 v02.50" date 11/07/2019
bios0: Hewlett-Packard HP Z440 Workstation
efi0 at bios0: UEFI 2.3.1
efi0: Hewlett-Packard BIOS ID: rev 0x20032
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA SSDT SSDT UEFI CELI BDAT WSMT HPET APIC
MCFG WDDT SSDT NITR DMAR ASF! BGRT
acpi0: wakeup devices PWRB(S4) BR1A(S4) BR1B(S4) BR2A(S4) BR3A(S4)
XHCI(S3) GBEM(S4) EHC2(S3) RP01(S4) RP02(S4) RP03(S4) RP04(S4) RP05(S4)
RP06(S4) RP07(S4) RP08(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2637 v3 @ 3.50GHz, 3491.96 MHz, 06-3f-02,
patch 00000049
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=77fefbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=77<SENSOR,ARAT> ecx=9<EFFFREQ>
cpu0: cpuid 7.0
ebx=37ab<FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM>
edx=9c000400<MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=1<XSAVEOPT>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=21<LAHF,ABM>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB
64b/line 8-way L2 cache, 15MB 64b/line 20-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-2637 v3 @ 3.50GHz, 3491.98 MHz, 06-3f-02,
patch 00000049
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 8 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5-2637 v3 @ 3.50GHz, 3491.97 MHz, 06-3f-02,
patch 00000049
cpu2: smt 0, core 4, package 0
cpu3 at mainbus0: apid 10 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5-2637 v3 @ 3.50GHz, 3492.05 MHz, 06-3f-02,
patch 00000049
cpu3: smt 0, core 5, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5-2637 v3 @ 3.50GHz, 3492.18 MHz, 06-3f-02,
patch 00000049
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5-2637 v3 @ 3.50GHz, 3492.06 MHz, 06-3f-02,
patch 00000049
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 9 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5-2637 v3 @ 3.50GHz, 3492.24 MHz, 06-3f-02,
patch 00000049
cpu6: smt 1, core 4, package 0
cpu7 at mainbus0: apid 11 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5-2637 v3 @ 3.50GHz, 3492.09 MHz, 06-3f-02,
patch 00000049
cpu7: smt 1, core 5, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec01000, version 20, 24 pins
acpimadt0: unknown apic structure type 7f
acpimadt0: unknown apic structure type 7f
acpimadt0: unknown apic structure type 7f
acpimcfg0 at acpi0
acpimcfg0: addr 0xd0000000, bus 0-255
acpiprt0 at acpi0: bus 255 (UNC0)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (BR1A)
acpiprt3 at acpi0: bus -1 (BR1B)
acpiprt4 at acpi0: bus 2 (BR2A)
acpiprt5 at acpi0: bus -1 (BR2B)
acpiprt6 at acpi0: bus -1 (BR2C)
acpiprt7 at acpi0: bus -1 (BR2D)
acpiprt8 at acpi0: bus 3 (BR3A)
acpiprt9 at acpi0: bus -1 (BR3B)
acpiprt10 at acpi0: bus -1 (BR3C)
acpiprt11 at acpi0: bus -1 (BR3D)
acpiprt12 at acpi0: bus 4 (RP01)
acpiprt13 at acpi0: bus 5 (RP02)
acpiprt14 at acpi0: bus -1 (RP03)
acpiprt15 at acpi0: bus 6 (RP04)
acpiprt16 at acpi0: bus 8 (RP05)
acpiprt17 at acpi0: bus -1 (RP06)
acpiprt18 at acpi0: bus -1 (RP07)
acpiprt19 at acpi0: bus -1 (RP08)
acpipci0 at acpi0 UNC0
"ACPI0004" at acpi0 not configured
acpibtn0 at acpi0: PWRB(wakeup)
acpipci1 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
"PNP0003" at acpi0 not configured
acpicmos0 at acpi0
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, device 0x001a15d1
rev 0x10
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1), PSS
acpicpu4 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1), PSS
acpicpu5 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1), PSS
acpicpu6 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1), PSS
acpicpu7 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1), PSS
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3491 MHz: speeds: 3501, 3500, 3300, 3200, 3000,
2800, 2700, 2500, 2300, 2200, 2000, 1900, 1700, 1500, 1400, 1200 MHz
pci0 at mainbus0 bus 255
"Intel E5 v3 QPI Monitor" rev 0x02 at pci0 dev 11 function 0 not configured
"Intel E5 v3 QPI Monitor" rev 0x02 at pci0 dev 11 function 1 not configured
"Intel E5 v3 QPI Monitor" rev 0x02 at pci0 dev 11 function 2 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci0 dev 12 function 0 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci0 dev 12 function 1 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci0 dev 12 function 2 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci0 dev 12 function 3 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci0 dev 12 function 4 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci0 dev 12 function 5 not configured
"Intel E5 v3 Ring Agent" rev 0x02 at pci0 dev 15 function 0 not configured
"Intel E5 v3 Ring Agent" rev 0x02 at pci0 dev 15 function 1 not configured
"Intel E5 v3 SAD" rev 0x02 at pci0 dev 15 function 4 not configured
"Intel E5 v3 SAD" rev 0x02 at pci0 dev 15 function 5 not configured
"Intel E5 v3 SAD" rev 0x02 at pci0 dev 15 function 6 not configured
"Intel E5 v3 PCIE Ring" rev 0x02 at pci0 dev 16 function 0 not configured
"Intel E5 v3 PCIE Monitor" rev 0x02 at pci0 dev 16 function 1 not configured
"Intel E5 v3 Scratch" rev 0x02 at pci0 dev 16 function 5 not configured
"Intel E5 v3 Scratch" rev 0x02 at pci0 dev 16 function 6 not configured
"Intel E5 v3 Scratch" rev 0x02 at pci0 dev 16 function 7 not configured
"Intel E5 v3 Home Agent" rev 0x02 at pci0 dev 18 function 0 not configured
"Intel E5 v3 Home Agent" rev 0x02 at pci0 dev 18 function 1 not configured
"Intel E5 v3 Memory" rev 0x02 at pci0 dev 19 function 0 not configured
"Intel E5 v3 RAS" rev 0x02 at pci0 dev 19 function 1 not configured
"Intel E5 v3 TAD" rev 0x02 at pci0 dev 19 function 2 not configured
"Intel E5 v3 TAD" rev 0x02 at pci0 dev 19 function 3 not configured
"Intel E5 v3 TAD" rev 0x02 at pci0 dev 19 function 4 not configured
"Intel E5 v3 TAD" rev 0x02 at pci0 dev 19 function 5 not configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci0 dev 19 function 6 not
configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci0 dev 19 function 7 not
configured
"Intel E5 v3 Thermal" rev 0x02 at pci0 dev 20 function 0 not configured
"Intel E5 v3 Thermal" rev 0x02 at pci0 dev 20 function 1 not configured
"Intel E5 v3 Error" rev 0x02 at pci0 dev 20 function 2 not configured
"Intel E5 v3 Error" rev 0x02 at pci0 dev 20 function 3 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci0 dev 20 function 6 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci0 dev 20 function 7 not configured
"Intel E5 v3 Thermal" rev 0x02 at pci0 dev 21 function 0 not configured
"Intel E5 v3 Thermal" rev 0x02 at pci0 dev 21 function 1 not configured
"Intel E5 v3 Error" rev 0x02 at pci0 dev 21 function 2 not configured
"Intel E5 v3 Error" rev 0x02 at pci0 dev 21 function 3 not configured
"Intel E5 v3 TA" rev 0x02 at pci0 dev 22 function 0 not configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci0 dev 22 function 6 not
configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci0 dev 22 function 7 not
configured
"Intel E5 v3 Thermal" rev 0x02 at pci0 dev 23 function 0 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci0 dev 23 function 4 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci0 dev 23 function 5 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci0 dev 23 function 6 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci0 dev 23 function 7 not configured
"Intel E5 v3 PCU" rev 0x02 at pci0 dev 30 function 0 not configured
"Intel E5 v3 PCU" rev 0x02 at pci0 dev 30 function 1 not configured
"Intel E5 v3 PCU" rev 0x02 at pci0 dev 30 function 2 not configured
"Intel E5 v3 PCU" rev 0x02 at pci0 dev 30 function 3 not configured
"Intel E5 v3 PCU" rev 0x02 at pci0 dev 30 function 4 not configured
"Intel E5 v3 VCU" rev 0x02 at pci0 dev 31 function 0 not configured
"Intel E5 v3 VCU" rev 0x02 at pci0 dev 31 function 2 not configured
pci1 at mainbus0 bus 0
pchb0 at pci1 dev 0 function 0 "Intel E5 v3 Host" rev 0x02
ppb0 at pci1 dev 1 function 0 "Intel E5 v3 PCIE" rev 0x02: msi
pci2 at ppb0 bus 1
ppb1 at pci1 dev 2 function 0 "Intel E5 v3 PCIE" rev 0x02: msi
pci3 at ppb1 bus 2
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 5450" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
ppb2 at pci1 dev 3 function 0 "Intel E5 v3 PCIE" rev 0x02: msi
pci4 at ppb2 bus 3
"Intel E5 v3 Address Map" rev 0x02 at pci1 dev 5 function 0 not configured
"Intel E5 v3 Hot Plug" rev 0x02 at pci1 dev 5 function 1 not configured
"Intel E5 v3 Error Reporting" rev 0x02 at pci1 dev 5 function 2 not
configured
"Intel E5 v3 I/O APIC" rev 0x02 at pci1 dev 5 function 4 not configured
"Intel C610 MS SPSR" rev 0x05 at pci1 dev 17 function 0 not configured
vendor "Intel", unknown product 0x2827 (class mass storage subclass
RAID, rev 0x05) at pci1 dev 17 function 4 not configured
xhci0 at pci1 dev 20 function 0 "Intel C610 xHCI" rev 0x05: apic 8 int
19, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel C610 MEI" rev 0x05 at pci1 dev 22 function 0 not configured
vendor "Intel", unknown product 0x8d3d (class communications subclass
serial, rev 0x05) at pci1 dev 22 function 3 not configured
em0 at pci1 dev 25 function 0 "Intel I218-LM" rev 0x05: msi, address
ec:b1:d7:2c:86:f5
ehci0 at pci1 dev 26 function 0 "Intel C610 USB" rev 0x05: apic 8 int 18
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci1 dev 27 function 0 "Intel C610 HD Audio" rev 0x05: msi
azalia0: codecs: Realtek ALC221
audio0 at azalia0
ppb3 at pci1 dev 28 function 0 "Intel C610 PCIE" rev 0xd5
pci5 at ppb3 bus 4
ppb4 at pci1 dev 28 function 1 "Intel C610 PCIE" rev 0xd5: msi
pci6 at ppb4 bus 5
ppb5 at pci1 dev 28 function 3 "Intel C610 PCIE" rev 0xd5: msi
pci7 at ppb5 bus 6
ppb6 at pci7 dev 0 function 0 "ITExpress IT8893E PCIE-PCI" rev 0x52
pci8 at ppb6 bus 7
ppb7 at pci1 dev 28 function 4 "Intel C610 PCIE" rev 0xd5: msi
pci9 at ppb7 bus 8
ehci1 at pci1 dev 29 function 0 "Intel C610 USB" rev 0x05: apic 8 int 18
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci1 dev 31 function 0 "Intel C610 LPC" rev 0x05
ahci0 at pci1 dev 31 function 2 "Intel C610 AHCI" rev 0x05: msi, AHCI 1.3
ahci0: port 0: 1.5Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
cd0 at scsibus1 targ 0 lun 0: <hp, CDDVDW SU-208GB, HN00> removable
sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WDS500G2B0A, 4150>
naa.5001b448bc61c8d6
sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin
ichiic0 at pci1 dev 31 function 3 "Intel C610 SMBus" rev 0x05: apic 8 int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 11 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/24.30 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 12 configuration 1 interface 0 "Logitech HID
compliant keyboard" rev 1.10/1.80 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub0 port 12 configuration 1 interface 1 "Logitech HID
compliant keyboard" rev 1.10/1.80 addr 3
uhidev2: iclass 3/0, 2 report ids
ucc0 at uhidev2 reportid 1: 76 usages, 2 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhub3 at uhub0 port 13 configuration 1 interface 0 "Texas Instruments
product 0x8142" rev 2.10/1.00 addr 4
uhub4 at uhub0 port 19 configuration 1 interface 0 "Texas Instruments
product 0x8140" rev 3.00/1.00 addr 5
uhub5 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.05 addr 2
uhub6 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.05 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (da4625ca1ef15298.a) swap on sd0b dump on sd0b
radeondrm0: CEDAR
radeon_audio_component_init: stub
radeondrm0: 1920x1080, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
No comments:
Post a Comment