X230 random reboots

Hi,

I have received a bit worn X230 which I have cleaned and installed openbsd 7.6 amd64 on it with MBR boot. The fan is a bit noisy sometimes, but the computer works very well once it manages to starts up, however I experience random reboots during the boot process, during the blue texts (I assume this is yet the kernel initialization stage).

Sadly the computer automatically reboots so there is no crashlog, but I have made a video recording about the screen, so I can say it reboots always at the same output, therefore it seems a specific issue is randomly triggered at boot. The last output on the screen according to the video-recording is:

pckbc0 at isa0 port 0x60/5 irq 1 irq 12

It seems after a warm reset like this there is a bigger chance to trigger the same issue again, but a cold reset always solves the issue. From 10 cold boots the issue happens 2 or 3 times, I would say.
I haven't tested it with any other OS and I have no other OS installed on this machine.

Am I the only one experiencing this? Can it be a hardware issue?

Thank You very much!

Best regards,
--ext

The full dmesg & usbdevs output below:

OpenBSD 7.6 (GENERIC.MP) #338: Mon Sep 30 08:55:35 MDT 2024
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8233267200 (7851MB)
avail mem = 7960481792 (7591MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (66 entries)
bios0: vendor LENOVO version "G2ETB7WW (2.77 )" date 09/24/2019
bios0: LENOVO 23331W4
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT ASF! HPET APIC MCFG ECDT FPDT UEFI UEFI POAT SSDT SSDT SSDT SSDT DMAR UEFI SSDT DBG2
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.22 MHz, 06-3a-09, patch 00000021
cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77bae3ff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=77<SENSOR,ARAT> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=281<FSGSBASE,SMEP,ERMS> edx=9c000400<MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=1<XSAVEOPT>
cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=1<LAHF>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 3MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.16 MHz, 06-3a-09, patch 00000021
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.15 MHz, 06-3a-09, patch 00000021
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.17 MHz, 06-3a-09, patch 00000021
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 4 (EXP3)
acpibtn0 at acpi0: LID_(wakeup)
acpibtn1 at acpi0: SLPB(wakeup)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0 TPM_ 1.2 (TIS) addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "42T4861" serial 34370 type LION oem "SANYO "
acpiac0 at acpi0: AC unit online
"LEN0078" at acpi0 not configured
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A0" at acpi0 not configured
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 103 degC
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi, IVYBRIDGE, gen 7
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address MA:CA:DD:RE:SS
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16
sdhc0: SDHC 3.00, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwx0 at pci2 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix
ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 2: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 2 lun 0: <ATA, ADATA SX300, 5.2.> naa.0000000000000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
"Intel 7 Series Thermal" rev 0x04 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 0x194b40 0xd002a3 0x123800
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.11 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.11 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.11 addr 2
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 mouse "MX Anywhere 3"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 5 "Intel Bluetooth" rev 2.01/0.01 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.20 addr 4
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen1 at uhub4 port 6 "Gemplus GemPC Express" rev 2.00/1.00 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 194559MB, 512 bytes/sector, 398458416 sectors
root on sd1a (4d32bdac8ba58925.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwx0: hw rev 0x340, fw 77.a20fb07d.0, address MA:CA:DD:RE:SS
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidpp0 detached
uhid2 detached
uhid3 detached
uhidev2 detached
uhub0 detached
ugen0 detached
video0 detached
uvideo0 detached
uhub3 detached
uhub1 detached
ugen1 detached
uhub4 detached
uhub2 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
wakeups: 0 1
wakeup event: unknown
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.11 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.11 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.11 addr 2
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 mouse "MX Anywhere 3"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 5 "Intel Bluetooth" rev 2.01/0.01 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.20 addr 4
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen1 at uhub4 port 6 "Gemplus GemPC Express" rev 2.00/1.00 addr 3
sdmmc0: can't enable card
umass0 at uhub0 port 6 configuration 1 interface 0 "Sony Storage Media" rev 3.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd2 at scsibus4 targ 1 lun 0: <Sony, Storage Media, PMAP> removable serial.054c09c2593A1D156A65
sd2: 29637MB, 512 bytes/sector, 60698112 sectors
uhub5 at uhub3 port 2 configuration 1 interface 0 "Terminus Technology USB2.0 HUB" rev 2.00/1.00 addr 5
uchcom0 at uhub5 port 1 configuration 1 interface 0 "QinHeng Electronics USB Serial" rev 1.10/2.64 addr 6
uchcom0: CH341
ucom0 at uchcom0: usb1.1.00012.0
ucom0 detached
uchcom0 detached
uhub5 detached
uhub5 at uhub3 port 2 configuration 1 interface 0 "Terminus Technology USB2.0 HUB" rev 2.00/1.00 addr 5
uchcom0 at uhub5 port 1 configuration 1 interface 0 "QinHeng Electronics USB Serial" rev 1.10/2.64 addr 6
uchcom0: CH341
ucom0 at uchcom0: usb1.1.00012.0
ucom0 detached
uchcom0 detached
uhub5 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidpp0 detached
uhid2 detached
uhid3 detached
uhidev2 detached
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.11 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.11 addr 5
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.11 addr 5
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 mouse "MX Anywhere 3"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
sd2 detached
scsibus4 detached
umass0 detached
uhub5 at uhub0 port 1 configuration 1 interface 0 "Terminus Technology USB2.0 HUB" rev 2.00/1.00 addr 2
uchcom0 at uhub5 port 1 configuration 1 interface 0 "QinHeng Electronics USB Serial" rev 1.10/2.64 addr 3
uchcom0: CH341
ucom0 at uchcom0: usb0.1.00001.0
uchcom0: cannot set DTR/RTS: STALLED
uchcom0: cannot set DTR/RTS: STALLED
uchcom0: cannot get version: STALLED
uchcom0: cannot set DTR/RTS: STALLED
uchcom0: cannot set DTR/RTS: STALLED
ucom0 detached
uchcom0 detached
uchcom0 at uhub5 port 1 configuration 1 interface 0 "QinHeng Electronics USB Serial" rev 1.10/2.64 addr 3
uchcom0: CH341
ucom0 at uchcom0: usb0.1.00001.0
ucom0 detached
uchcom0 detached
uchcom0 at uhub5 port 1 configuration 1 interface 0 "QinHeng Electronics USB Serial" rev 1.10/2.64 addr 3
uchcom0: CH341
ucom0 at uchcom0: usb0.1.00001.0
uchcom0: cannot set DTR/RTS: IOERROR
uchcom0: cannot set DTR/RTS: TIMEOUT
ucom0 detached
uchcom0 detached
uhub5 detached
uhub0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidpp0 detached
uhid2 detached
uhid3 detached
uhidev2 detached
ugen0 detached
video0 detached
uvideo0 detached
uhub3 detached
uhub1 detached
ugen1 detached
uhub4 detached
uhub2 detached
sdmmc0: can't enable card
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
wakeups: 0 1
wakeup event: unknown
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.11 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.11 addr 3
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.11 addr 3
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 mouse "MX Anywhere 3"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
ugen0 at uhub3 port 5 "Intel Bluetooth" rev 2.01/0.01 addr 4
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.20 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen1 at uhub4 port 6 "Gemplus GemPC Express" rev 2.00/1.00 addr 3
uhub0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidpp0 detached
uhid2 detached
uhid3 detached
uhidev2 detached
ugen0 detached
video0 detached
uvideo0 detached
uhub3 detached
uhub1 detached
ugen1 detached
uhub4 detached
uhub2 detached
sdmmc0: can't enable card
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
wakeups: 0 1
wakeup event: unknown
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.11 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.11 addr 3
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.11 addr 3
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 mouse "MX Anywhere 3"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
ugen0 at uhub3 port 5 "Intel Bluetooth" rev 2.01/0.01 addr 4
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.20 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen1 at uhub4 port 6 "Gemplus GemPC Express" rev 2.00/1.00 addr 3
umass0 at uhub0 port 6 configuration 1 interface 0 "Sony Storage Media" rev 3.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd2 at scsibus4 targ 1 lun 0: <Sony, Storage Media, PMAP> removable serial.054c09c2593A1D156A65
sd2: 29637MB, 512 bytes/sector, 60698112 sectors
uhub5 at uhub0 port 1 configuration 1 interface 0 "Terminus Technology USB2.0 HUB" rev 2.00/1.00 addr 3
uchcom0 at uhub5 port 1 configuration 1 interface 0 "QinHeng Electronics USB Serial" rev 1.10/2.64 addr 4
uchcom0: CH341
ucom0 at uchcom0: usb0.1.00001.0
sd2 detached
scsibus4 detached
umass0 detached
uchcom0: cannot set DTR/RTS: IOERROR
uchcom0: cannot set DTR/RTS: TIMEOUT
ucom0 detached
uchcom0 detached
uhub5 detached
uhub0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidpp0 detached
uhid2 detached
uhid3 detached
uhidev2 detached
ugen0 detached
video0 detached
uvideo0 detached
uhub3 detached
uhub1 detached
ugen1 detached
uhub4 detached
uhub2 detached
sdmmc0: can't enable card
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
wakeups: 0 1
wakeup event: unknown
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.11 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.11 addr 3
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3: 767 usages, 20 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.11 addr 3
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 device 1 mouse "MX Anywhere 3"
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
ugen0 at uhub3 port 5 "Intel Bluetooth" rev 2.01/0.01 addr 4
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. Integrated Camera" rev 2.00/5.20 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen1 at uhub4 port 6 "Gemplus GemPC Express" rev 2.00/1.00 addr 3

------------------------

usbdevs
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
Controller /dev/usb1:
addr 01: 8086:0000 Intel, EHCI root hub
addr 02: 8087:0024 Intel, Rate Matching Hub
addr 03: 046d:c52b Logitech, USB Receiver
addr 04: 8087:0029 Intel, Bluetooth
addr 05: 04f2:b2ea Chicony Electronics Co., Ltd., Integrated Camera
Controller /dev/usb2:
addr 01: 8086:0000 Intel, EHCI root hub
addr 02: 8087:0024 Intel, Rate Matching Hub
addr 03: 08e6:34ec Gemplus, GemPC Express