On Monday, March 31st, 2025 at 6:09 PM, Zé Loff <zeloff@zeloff.org> wrote:
> Per this configuration, both interfaces are on 192.168.1.0/24: one is
> .11, the other is .12.
> Since routing seems to work properly, I am assuming this was a copy/paste error.
No copy/paste error. Perhaps a real error on my side.
The machine is a firewall sitting between the gateway and the LAN.
The gateway has a single wire connected to the firewall's port em0 (192.168.1.11).
The LAN's switch has a 10Gbps link to the firewall's port ix0 (192.168.1.12).
> Back to the original question, have you considered using /etc/mygate to
> specify the default route?
```
>cat /etc/mygate
192.168.1.1
```
No comments:
Post a Comment