Re: external Seagate disk

On Sat, Dec 01, 2018 at 11:27:24AM +0100, Jan Stary wrote:
> This is current/amd64 (full dmesg below).
> After attaching this "Maxtor M3 Portable" disk
> https://www.alza.cz/maxtor-2-5-m3-portable?dq=4411356
> dmesg says
>
> umass0 at uhub0 port 19 configuration 1 interface 0 "Seagate M3 Portable" rev 3.00/7.10 addr 4
> umass0: using SCSI over Bulk-Only
> scsibus4 at umass0: 2 targets, initiator 0
> usbd_start_next: error=13
>
> On a different machine (dmesg also below), it attaches as
>
> umass0 at uhub4 port 2 configuration 1 interface 0 "Seagate M3 Portable" rev 2.10/7.10 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus4 at umass0: 2 targets, initiator 0
> sd6 at scsibus4 targ 1 lun 0: <Seagate, M3 Portable, 0710> SCSI4 0/direct fixed
> sd6: 953869MB, 512 bytes/sector, 1953525167 sectors
>
> and seems to work just fine.
>
> Does that indicate a problem with the USB port, or USB hub, at the
> first machine? It does not attach on the meighbouring ports either.

I can't help you with your problem but you could test also the disk on
the xhci port of the working machine.



>
> Thank you
>
> Jan
>
> Machine whwre it does not attach:
>
> OpenBSD 6.4-current (GENERIC.MP) #0: Mon Nov 26 19:57:11 CET 2018
> hans@dell.stare.cz:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16810340352 (16031MB)
> avail mem = 16291577856 (15536MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xeac10 (107 entries)
> bios0: vendor Dell Inc. version "1.5.0" date 04/22/2016
> bios0: Dell Inc. Latitude E5570
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT LPIT SSDT SSDT SSDT DBGP DBG2 SSDT UEFI SSDT SSDT SLIC ASF!
> acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-6440HQ CPU @ 2.60GHz, 2369.35 MHz, 06-5e-03
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 23MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-6440HQ CPU @ 2.60GHz, 2294.66 MHz, 06-5e-03
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i5-6440HQ CPU @ 2.60GHz, 2294.66 MHz, 06-5e-03
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i5-6440HQ CPU @ 2.60GHz, 2294.66 MHz, 06-5e-03
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf0000000, bus 0-127
> acpihpet0 at acpi0: 23999999 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG0)
> acpiprt2 at acpi0: bus -1 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2)
> acpiprt4 at acpi0: bus -1 (RP09)
> acpiprt5 at acpi0: bus -1 (RP10)
> acpiprt6 at acpi0: bus -1 (RP11)
> acpiprt7 at acpi0: bus -1 (RP12)
> acpiprt8 at acpi0: bus -1 (RP13)
> acpiprt9 at acpi0: bus -1 (RP01)
> acpiprt10 at acpi0: bus 1 (RP02)
> acpiprt11 at acpi0: bus 2 (RP03)
> acpiprt12 at acpi0: bus -1 (RP04)
> acpiprt13 at acpi0: bus -1 (RP05)
> acpiprt14 at acpi0: bus -1 (RP06)
> acpiprt15 at acpi0: bus -1 (RP07)
> acpiprt16 at acpi0: bus -1 (RP08)
> acpiprt17 at acpi0: bus -1 (RP17)
> acpiprt18 at acpi0: bus -1 (RP18)
> acpiprt19 at acpi0: bus -1 (RP19)
> acpiprt20 at acpi0: bus -1 (RP20)
> acpiprt21 at acpi0: bus -1 (RP14)
> acpiprt22 at acpi0: bus -1 (RP15)
> acpiprt23 at acpi0: bus -1 (RP16)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PG00, resource for PEG0
> acpipwrres1 at acpi0: PG01, resource for PEG1
> acpipwrres2 at acpi0: PG02, resource for PEG2
> acpipwrres3 at acpi0: WRST
> acpipwrres4 at acpi0: WRST
> acpipwrres5 at acpi0: WRST
> acpipwrres6 at acpi0: WRST
> acpipwrres7 at acpi0: WRST
> acpipwrres8 at acpi0: WRST
> acpipwrres9 at acpi0: WRST
> acpipwrres10 at acpi0: WRST
> acpipwrres11 at acpi0: WRST
> acpipwrres12 at acpi0: WRST
> acpipwrres13 at acpi0: WRST
> acpipwrres14 at acpi0: WRST
> acpipwrres15 at acpi0: WRST
> acpipwrres16 at acpi0: WRST
> acpipwrres17 at acpi0: WRST
> acpipwrres18 at acpi0: WRST
> acpipwrres19 at acpi0: WRST
> acpitz0 at acpi0: critical temperature is 107 degC
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> "INT3403" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "SMO8810" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT33A1" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PBTN
> acpibtn2 at acpi0: SBTN
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "DELL TXF9M65" serial 48071 type LiP oem "Samsung SDI"
> "DELLABC6" at acpi0 not configured
> "DELLABCE" at acpi0 not configured
> "INT3400" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: LCD_
> cpu0: Enhanced SpeedStep 2369 MHz: speeds: 2601, 2600, 2400, 2300, 2200, 2100, 2000, 1800, 1700, 1600, 1400, 1300, 1200, 1100, 900, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
> drm0 at inteldrm0
> inteldrm0: msi
> error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (-22)
> error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored)
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel Core 6G Thermal" rev 0x07 at pci0 dev 4 function 0 not configured
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
> "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
> puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x31: ports: 16 com
> com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI 1.3.1
> ahci0: port 0: 6.0Gb/s
> ahci0: PHY offline on port 2
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSCKGF25, LB1i> SCSI3 0/direct fixed naa.55cd2e414d0cc399
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci1 at ppb0 bus 1
> iwm0 at pci1 dev 0 function 0 "Intel Dual Band Wireless AC 8260" rev 0x3a, msi
> ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
> pci2 at ppb1 bus 2
> rtsx0 at pci2 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
> sdmmc0 at rtsx0: 4-bit, dma
> pcib0 at pci0 dev 31 function 0 "Intel CM236 LPC" rev 0x31
> "Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
> azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x31: msi
> azalia0: codecs: Realtek/0x0293, Intel/0x2809, using Realtek/0x0293
> audio0 at azalia0
> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31: apic 2 int 16
> iic0 at ichiic0
> iic0: addr 0x29 0f=33 10=82 11=80 12=8e 13=61 14=a0 15=20 16=24 17=20 18=1a 19=a0 1a=70 1b=64 1c=e0 1d=a0 1e=a0 20=0f 22=40 2f=20 30=95 32=0e 33=16 8f=33 90=82 91=80 92=8e 93=61 94=a0 95=20 96=24 97=20 98=1a 99=a0 9a=70 9b=64 9c=e0 9d=a0 9e=a0 a0=0f a2=40 af=20 b0=95 b2=0e b3=16 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x31: msi, address 28:f1:0e:26:94:75
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> ugen0 at uhub0 port 10 "Broadcom Corp 5880" rev 1.10/1.01 addr 2
> uvideo0 at uhub0 port 11 configuration 1 interface 0 "CN0J8NNP7248765RBBM6A00 Integrated_Webcam_HD" rev 2.00/54.13 addr 3
> video0 at uvideo0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd1: 244190MB, 512 bytes/sector, 500102858 sectors
> root on sd1a (5b54f917e2739114.a) swap on sd1b dump on sd1b
> iwm0: hw rev 0x200, fw ver 16.242414.0, address e4:a4:71:40:21:08
>
>
> Machine where it attaches and works:
>
> OpenBSD 6.4-current (GENERIC.MP) #0: Thu Nov 1 09:32:43 CET 2018
> hans@box.stare.cz:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8486780928 (8093MB)
> avail mem = 8220303360 (7839MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (36 entries)
> bios0: vendor Award Software International, Inc. version "F3" date 03/31/2011
> bios0: Gigabyte Technology Co., Ltd. H67MA-USB3-B3
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP HPET MCFG ASPT SSPT EUDS MATS TAMG APIC SSDT
> acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) PEX6(S5) PEX7(S5) HUB0(S5) UAR1(S3) USBE(S3) USE2(S3) AZAL(S5) PCI0(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf4000000, bus 0-63
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.50 MHz, 06-2a-07
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz, 06-2a-07
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz, 06-2a-07
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz, 06-2a-07
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0: apid 1 (application processor)
> cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz, 06-2a-07
> cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: smt 1, core 0, package 0
> cpu5 at mainbus0: apid 3 (application processor)
> cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz, 06-2a-07
> cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: smt 1, core 1, package 0
> cpu6 at mainbus0: apid 5 (application processor)
> cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz, 06-2a-07
> cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: smt 1, core 2, package 0
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3492.07 MHz, 06-2a-07
> cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG0)
> acpiprt2 at acpi0: bus -1 (PEG1)
> acpiprt3 at acpi0: bus 1 (PEX0)
> acpiprt4 at acpi0: bus -1 (PEX1)
> acpiprt5 at acpi0: bus -1 (PEX2)
> acpiprt6 at acpi0: bus -1 (PEX3)
> acpiprt7 at acpi0: bus -1 (PEX4)
> acpiprt8 at acpi0: bus -1 (PEX5)
> acpiprt9 at acpi0: bus 2 (PEX6)
> acpiprt10 at acpi0: bus 3 (PEX7)
> acpicpu0 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpicpu4 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpicpu5 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpicpu6 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpicpu7 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpibtn0 at acpi0: PWRB
> acpipci0 at acpi0 PCI0: _OSC failed
> acpicmos0 at acpi0
> cpu0: Enhanced SpeedStep 3492 MHz: speeds: 3701, 3700, 3600, 3500, 3400, 3300, 3200, 3100, 3000, 2900, 2800, 2700, 2600, 2500, 2400, 2300, 2200, 2100, 1600 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1680x1050, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 18
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
> azalia0: codecs: Realtek/0x0889, Intel/0x2805, using Realtek/0x0889
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi
> pci2 at ppb1 bus 2
> re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL (0x2c80), msi, address 50:e5:49:36:ec:0d
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ppb2 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb5: msi
> pci3 at ppb2 bus 3
> xhci0 at pci3 dev 0 function 0 "Etron EJ168 xHCI" rev 0x01: msi, xHCI 1.0
> usb1 at xhci0: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "Etron xHCI root hub" rev 3.00/1.00 addr 1
> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
> pci4 at ppb3 bus 4
> pcib0 at pci0 dev 31 function 0 "Intel H67 LPC" rev 0x05
> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
> ahci0: device on port 0 didn't come ready, TFD: 0x80<BSY>
> ahci0: CLO did not complete
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 3.0Gb/s
> ahci0: port 2: 3.0Gb/s
> ahci0: port 3: 3.0Gb/s
> ahci0: port 4: 3.0Gb/s
> ahci0: port 5: 3.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSA2M040, 2CV1> SCSI3 0/direct fixed naa.50015179593bd675
> sd0: 38166MB, 512 bytes/sector, 78165360 sectors, thin
> sd1 at scsibus1 targ 1 lun 0: <ATA, ST1000LM024 HN-M, 2AR1> SCSI3 0/direct fixed naa.50004cf207132b48
> sd1: 953868MB, 512 bytes/sector, 1953523055 sectors
> sd2 at scsibus1 targ 2 lun 0: <ATA, SAMSUNG HD105SI, 1AJ1> SCSI3 0/direct fixed naa.50024e920592fbeb
> sd2: 953869MB, 512 bytes/sector, 1953525168 sectors
> sd3 at scsibus1 targ 3 lun 0: <ATA, ST1500DL003-9VT1, CC32> SCSI3 0/direct fixed naa.5000c5002f119d73
> sd3: 1430799MB, 512 bytes/sector, 2930277168 sectors
> sd4 at scsibus1 targ 4 lun 0: <ATA, ST2000DM001-1CH1, CC29> SCSI3 0/direct fixed naa.5000c50065396a7d
> sd4: 1907729MB, 512 bytes/sector, 3907029168 sectors
> sd5 at scsibus1 targ 5 lun 0: <ATA, ST9320320AS, SD03> SCSI3 0/direct fixed naa.5000c50013baac5f
> sd5: 305245MB, 512 bytes/sector, 625142448 sectors
> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
> spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0x290
> uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev 1.10/1.00 addr 3
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (c3cac300fd798ecf.a) swap on sd0b dump on sd0b
>

--
Juan Francisco Cantero Hurtado http://juanfra.info