Hi,
I don't understand - does this turn on more of these annoying debug messages like "Boot from" by default again?
Reyk
> Am 09.12.2018 um 12:19 schrieb Claudio Jeker <cjeker@diehard.n-r-g.com>:
>
> I started looking at supporting fw_cfg in vmd. Now to make this work with
> SeaBIOS there are a few fixes needed. First of all the way it reads the
> FW_CFG_DATA port is not supported by vmm(4) (problem whith 'rep insb' on
> IO ports). Additionally this cleans up some of the patches which I think
> are not needed if the setting of screen-and-debug is changed. At least I
> no longer see double printing of messages.
> I enabled CONFIG_BOOTORDER because this is what I would like to tweak.
> The CONFIG_DEBUG_LEVEL can be taken out before commit but it helped me
> debugging this. Once vmd uses fw_cfg more of the patches can be removed.
>
> --
> :wq Claudio
>
> Index: Makefile
> ===================================================================
> RCS file: /cvs/ports/sysutils/firmware/vmm/Makefile,v
> retrieving revision 1.15
> diff -u -p -r1.15 Makefile
> --- Makefile 21 Nov 2018 00:26:05 -0000 1.15
> +++ Makefile 9 Dec 2018 11:09:05 -0000
> @@ -13,7 +13,7 @@ CC = /usr/bin/gcc
> FW_DRIVER= vmm
> FW_VER= 1.11.0
> SB_VER= 20100422
> -REVISION= 0
> +REVISION= 1
> DISTNAME= seabios-${FW_VER}
> DISTFILES= ${DISTNAME}${EXTRACT_SUFX} \
> sgabios-20100422{23d474943dcd55d0550a3d20b3d30e9040a4f15b}.tar.gz:0
> Index: files/config
> ===================================================================
> RCS file: /cvs/ports/sysutils/firmware/vmm/files/config,v
> retrieving revision 1.6
> diff -u -p -r1.6 config
> --- files/config 11 Jul 2018 09:09:46 -0000 1.6
> +++ files/config 7 Dec 2018 20:34:05 -0000
> @@ -15,7 +15,7 @@ CONFIG_QEMU_HARDWARE=y
> # CONFIG_THREADS is not set
> # CONFIG_RELOCATE_INIT is not set
> # CONFIG_BOOTMENU is not set
> -# CONFIG_BOOTORDER is not set
> +CONFIG_BOOTORDER=y
> # CONFIG_ENTRY_EXTRASTACK is not set
> CONFIG_MALLOC_UPPERMEMORY=y
> CONFIG_ROM_SIZE=0
> @@ -92,7 +92,7 @@ CONFIG_VGA_EXTRA_STACK_SIZE=512
> #
> # Debugging
> #
> -CONFIG_DEBUG_LEVEL=-1
> +CONFIG_DEBUG_LEVEL=1
> CONFIG_DEBUG_SERIAL=y
> CONFIG_DEBUG_SERIAL_PORT=0x3f8
> CONFIG_DEBUG_IO=n
> Index: patches/patch-src_boot_c
> ===================================================================
> RCS file: patches/patch-src_boot_c
> diff -N patches/patch-src_boot_c
> --- patches/patch-src_boot_c 11 Jul 2018 09:09:46 -0000 1.1
> +++ /dev/null 1 Jan 1970 00:00:00 -0000
> @@ -1,43 +0,0 @@
> ---- src/boot.c.orig Tue Jul 10 14:52:11 2018
> -+++ src/boot.c Tue Jul 10 14:53:18 2018
> -@@ -659,7 +659,7 @@ boot_cdrom(struct drive_s *drive)
> - {
> - if (! CONFIG_CDROM_BOOT)
> - return;
> -- printf("Booting from DVD/CD...\n");
> -+ dprintf(1, "Booting from DVD/CD...\n");
> -
> - int status = cdrom_boot(drive);
> - if (status) {
> -@@ -685,7 +685,7 @@ boot_cbfs(struct cbfs_file *file)
> - {
> - if (!CONFIG_COREBOOT_FLASH)
> - return;
> -- printf("Booting from CBFS...\n");
> -+ dprintf(1, "Booting from CBFS...\n");
> - cbfs_run_payload(file);
> - }
> -
> -@@ -693,7 +693,7 @@ boot_cbfs(struct cbfs_file *file)
> - static void
> - boot_rom(u32 vector)
> - {
> -- printf("Booting from ROM...\n");
> -+ dprintf(1, "Booting from ROM...\n");
> - struct segoff_s so;
> - so.segoff = vector;
> - call_boot_entry(so, 0);
> -@@ -733,11 +733,11 @@ do_boot(int seq_nr)
> - struct bev_s *ie = &BEV[seq_nr];
> - switch (ie->type) {
> - case IPL_TYPE_FLOPPY:
> -- printf("Booting from Floppy...\n");
> -+ dprintf(1, "Booting from Floppy...\n");
> - boot_disk(0x00, CheckFloppySig);
> - break;
> - case IPL_TYPE_HARDDISK:
> -- printf("Booting from Hard Disk...\n");
> -+ dprintf(1, "Booting from Hard Disk...\n");
> - boot_disk(0x80, 1);
> - break;
> - case IPL_TYPE_CDROM:
> Index: patches/patch-src_fw_paravirt_c
> ===================================================================
> RCS file: /cvs/ports/sysutils/firmware/vmm/patches/patch-src_fw_paravirt_c,v
> retrieving revision 1.2
> diff -u -p -r1.2 patch-src_fw_paravirt_c
> --- patches/patch-src_fw_paravirt_c 26 Apr 2018 12:23:32 -0000 1.2
> +++ patches/patch-src_fw_paravirt_c 9 Dec 2018 10:55:37 -0000
> @@ -1,18 +1,27 @@
> $OpenBSD: patch-src_fw_paravirt_c,v 1.2 2018/04/26 12:23:32 sthen Exp $
>
> +Don't use 'rep insb' to read IO ports, vmm does not support that yet.
> Allow detection of >4GB RAM. Normally seabios only allows this with the
> qemu config device which VMM doesn't have.
>
> Index: src/fw/paravirt.c
> --- src/fw/paravirt.c.orig
> +++ src/fw/paravirt.c
> -@@ -500,6 +500,18 @@ qemu_cfg_e820(void)
> - dprintf(1, "RamSizeOver4G: 0x%016llx [cmos]\n", RamSizeOver4G);
> +@@ -257,7 +257,9 @@ qemu_cfg_read(void *buf, int len)
> + if (qemu_cfg_dma_enabled()) {
> + qemu_cfg_dma_transfer(buf, len, QEMU_CFG_DMA_CTL_READ);
> + } else {
> +- insb(PORT_QEMU_CFG_DATA, buf, len);
> ++ u8 *d = buf;
> ++ while (len-- > 0)
> ++ *d++ = inb(PORT_QEMU_CFG_DATA);
> + }
> }
>
> -+void
> -+vmm_check_high_mem(void)
> -+{
> +@@ -491,6 +493,18 @@ qemu_cfg_e820(void)
> + e820_add(0xfffbc000, 4*4096, E820_RESERVED);
> + }
> +
> + // Check for memory over 4Gig in cmos
> + u64 high = ((rtc_read(CMOS_MEM_HIGHMEM_LOW) << 16)
> + | ((u32)rtc_read(CMOS_MEM_HIGHMEM_MID) << 24)
> @@ -22,6 +31,9 @@ Index: src/fw/paravirt.c
> + dprintf(1, "RamSizeOver4G: 0x%016llx [cmos]\n", RamSizeOver4G);
> +}
> +
> - // Populate romfile entries for legacy fw_cfg ports (that predate the
> - // "file" interface).
> - static void
> ++void
> ++vmm_check_high_mem(void)
> ++{
> + // Check for memory over 4Gig in cmos
> + u64 high = ((rtc_read(CMOS_MEM_HIGHMEM_LOW) << 16)
> + | ((u32)rtc_read(CMOS_MEM_HIGHMEM_MID) << 24)
> Index: patches/patch-src_optionroms_c
> ===================================================================
> RCS file: /cvs/ports/sysutils/firmware/vmm/patches/patch-src_optionroms_c,v
> retrieving revision 1.2
> diff -u -p -r1.2 patch-src_optionroms_c
> --- patches/patch-src_optionroms_c 19 Jul 2017 19:33:51 -0000 1.2
> +++ patches/patch-src_optionroms_c 9 Dec 2018 10:45:01 -0000
> @@ -2,9 +2,11 @@ $OpenBSD: patch-src_optionroms_c,v 1.2 2
>
> Needed for SGABIOS option ROM for VMM. Normally these are setup based on
> the qemu fw_cfg interface (or coreboot CBFS on hardware).
> +Turn of screen-and-debug to prevent double printing of chars.
>
> ---- src/optionroms.c.orig Fri Mar 31 09:34:40 2017
> -+++ src/optionroms.c Fri Mar 31 09:35:35 2017
> +Index: src/optionroms.c
> +--- src/optionroms.c.orig
> ++++ src/optionroms.c
> @@ -361,7 +361,7 @@ optionrom_setup(void)
>
> // All option roms found and deployed - now build BEV/BCV vectors.
> @@ -14,3 +16,12 @@ the qemu fw_cfg interface (or coreboot C
> while (pos < rom_get_last()) {
> struct rom_header *rom = (void*)pos;
> if (! is_valid_rom(rom)) {
> +@@ -413,7 +413,7 @@ vgarom_setup(void)
> + EnforceChecksum = romfile_loadint("etc/optionroms-checksum", 1);
> + S3ResumeVga = romfile_loadint("etc/s3-resume-vga-init", CONFIG_QEMU);
> + RunPCIroms = romfile_loadint("etc/pci-optionrom-exec", 2);
> +- ScreenAndDebug = romfile_loadint("etc/screen-and-debug", 1);
> ++ ScreenAndDebug = romfile_loadint("etc/screen-and-debug", 0);
> +
> + // Clear option rom memory
> + memset((void*)BUILD_ROM_START, 0, rom_get_max() - BUILD_ROM_START);
>
No comments:
Post a Comment