On Sun, Dec 09, 2018 at 01:44:07PM +0100, Reyk Floeter wrote:
> Hi,
>
> I don't understand - does this turn on more of these annoying debug
> messages like "Boot from" by default again?
>
If CONFIG_DEBUG_LEVEL is kept at -1 then the output will be:
Connected to /dev/ttypi (speed 115200)
Booting from Hard Disk...
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[638K 510M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.41
-
com0: 115200 baud
switching console to com0
>> OpenBSD/amd64 BOOT 3.41
boot>
Since I plan to add bootorder support I think it is a useful message:
Connected to /dev/ttypi (speed 115200)
Booting from DVD/CD...
CD-ROM: E0
Loading /6.4/AMD64/CDBOOT
probing: pc0 com0 mem[638K 510M a20=on]
disk: hd0+ cd0
>> OpenBSD/amd64 CDBOOT 3.40
boot>
Makes it easier to know what SeaBIOS selected to boot from.
But honestly if this is the bikeshed to work on then I can readd the
boot.c diff since honestly that is absolutly unimportant.
> Reyk
>
> > Am 09.12.2018 um 12:19 schrieb Claudio Jeker <cjeker@diehard.n-r-g.com>:
> >
> > I started looking at supporting fw_cfg in vmd. Now to make this work with
> > SeaBIOS there are a few fixes needed. First of all the way it reads the
> > FW_CFG_DATA port is not supported by vmm(4) (problem whith 'rep insb' on
> > IO ports). Additionally this cleans up some of the patches which I think
> > are not needed if the setting of screen-and-debug is changed. At least I
> > no longer see double printing of messages.
> > I enabled CONFIG_BOOTORDER because this is what I would like to tweak.
> > The CONFIG_DEBUG_LEVEL can be taken out before commit but it helped me
> > debugging this. Once vmd uses fw_cfg more of the patches can be removed.
> >
> > --
> > :wq Claudio
> >
> > Index: Makefile
> > ===================================================================
> > RCS file: /cvs/ports/sysutils/firmware/vmm/Makefile,v
> > retrieving revision 1.15
> > diff -u -p -r1.15 Makefile
> > --- Makefile 21 Nov 2018 00:26:05 -0000 1.15
> > +++ Makefile 9 Dec 2018 11:09:05 -0000
> > @@ -13,7 +13,7 @@ CC = /usr/bin/gcc
> > FW_DRIVER= vmm
> > FW_VER= 1.11.0
> > SB_VER= 20100422
> > -REVISION= 0
> > +REVISION= 1
> > DISTNAME= seabios-${FW_VER}
> > DISTFILES= ${DISTNAME}${EXTRACT_SUFX} \
> > sgabios-20100422{23d474943dcd55d0550a3d20b3d30e9040a4f15b}.tar.gz:0
> > Index: files/config
> > ===================================================================
> > RCS file: /cvs/ports/sysutils/firmware/vmm/files/config,v
> > retrieving revision 1.6
> > diff -u -p -r1.6 config
> > --- files/config 11 Jul 2018 09:09:46 -0000 1.6
> > +++ files/config 7 Dec 2018 20:34:05 -0000
> > @@ -15,7 +15,7 @@ CONFIG_QEMU_HARDWARE=y
> > # CONFIG_THREADS is not set
> > # CONFIG_RELOCATE_INIT is not set
> > # CONFIG_BOOTMENU is not set
> > -# CONFIG_BOOTORDER is not set
> > +CONFIG_BOOTORDER=y
> > # CONFIG_ENTRY_EXTRASTACK is not set
> > CONFIG_MALLOC_UPPERMEMORY=y
> > CONFIG_ROM_SIZE=0
> > @@ -92,7 +92,7 @@ CONFIG_VGA_EXTRA_STACK_SIZE=512
> > #
> > # Debugging
> > #
> > -CONFIG_DEBUG_LEVEL=-1
> > +CONFIG_DEBUG_LEVEL=1
> > CONFIG_DEBUG_SERIAL=y
> > CONFIG_DEBUG_SERIAL_PORT=0x3f8
> > CONFIG_DEBUG_IO=n
> > Index: patches/patch-src_boot_c
> > ===================================================================
> > RCS file: patches/patch-src_boot_c
> > diff -N patches/patch-src_boot_c
> > --- patches/patch-src_boot_c 11 Jul 2018 09:09:46 -0000 1.1
> > +++ /dev/null 1 Jan 1970 00:00:00 -0000
> > @@ -1,43 +0,0 @@
> > ---- src/boot.c.orig Tue Jul 10 14:52:11 2018
> > -+++ src/boot.c Tue Jul 10 14:53:18 2018
> > -@@ -659,7 +659,7 @@ boot_cdrom(struct drive_s *drive)
> > - {
> > - if (! CONFIG_CDROM_BOOT)
> > - return;
> > -- printf("Booting from DVD/CD...\n");
> > -+ dprintf(1, "Booting from DVD/CD...\n");
> > -
> > - int status = cdrom_boot(drive);
> > - if (status) {
> > -@@ -685,7 +685,7 @@ boot_cbfs(struct cbfs_file *file)
> > - {
> > - if (!CONFIG_COREBOOT_FLASH)
> > - return;
> > -- printf("Booting from CBFS...\n");
> > -+ dprintf(1, "Booting from CBFS...\n");
> > - cbfs_run_payload(file);
> > - }
> > -
> > -@@ -693,7 +693,7 @@ boot_cbfs(struct cbfs_file *file)
> > - static void
> > - boot_rom(u32 vector)
> > - {
> > -- printf("Booting from ROM...\n");
> > -+ dprintf(1, "Booting from ROM...\n");
> > - struct segoff_s so;
> > - so.segoff = vector;
> > - call_boot_entry(so, 0);
> > -@@ -733,11 +733,11 @@ do_boot(int seq_nr)
> > - struct bev_s *ie = &BEV[seq_nr];
> > - switch (ie->type) {
> > - case IPL_TYPE_FLOPPY:
> > -- printf("Booting from Floppy...\n");
> > -+ dprintf(1, "Booting from Floppy...\n");
> > - boot_disk(0x00, CheckFloppySig);
> > - break;
> > - case IPL_TYPE_HARDDISK:
> > -- printf("Booting from Hard Disk...\n");
> > -+ dprintf(1, "Booting from Hard Disk...\n");
> > - boot_disk(0x80, 1);
> > - break;
> > - case IPL_TYPE_CDROM:
> > Index: patches/patch-src_fw_paravirt_c
> > ===================================================================
> > RCS file: /cvs/ports/sysutils/firmware/vmm/patches/patch-src_fw_paravirt_c,v
> > retrieving revision 1.2
> > diff -u -p -r1.2 patch-src_fw_paravirt_c
> > --- patches/patch-src_fw_paravirt_c 26 Apr 2018 12:23:32 -0000 1.2
> > +++ patches/patch-src_fw_paravirt_c 9 Dec 2018 10:55:37 -0000
> > @@ -1,18 +1,27 @@
> > $OpenBSD: patch-src_fw_paravirt_c,v 1.2 2018/04/26 12:23:32 sthen Exp $
> >
> > +Don't use 'rep insb' to read IO ports, vmm does not support that yet.
> > Allow detection of >4GB RAM. Normally seabios only allows this with the
> > qemu config device which VMM doesn't have.
> >
> > Index: src/fw/paravirt.c
> > --- src/fw/paravirt.c.orig
> > +++ src/fw/paravirt.c
> > -@@ -500,6 +500,18 @@ qemu_cfg_e820(void)
> > - dprintf(1, "RamSizeOver4G: 0x%016llx [cmos]\n", RamSizeOver4G);
> > +@@ -257,7 +257,9 @@ qemu_cfg_read(void *buf, int len)
> > + if (qemu_cfg_dma_enabled()) {
> > + qemu_cfg_dma_transfer(buf, len, QEMU_CFG_DMA_CTL_READ);
> > + } else {
> > +- insb(PORT_QEMU_CFG_DATA, buf, len);
> > ++ u8 *d = buf;
> > ++ while (len-- > 0)
> > ++ *d++ = inb(PORT_QEMU_CFG_DATA);
> > + }
> > }
> >
> > -+void
> > -+vmm_check_high_mem(void)
> > -+{
> > +@@ -491,6 +493,18 @@ qemu_cfg_e820(void)
> > + e820_add(0xfffbc000, 4*4096, E820_RESERVED);
> > + }
> > +
> > + // Check for memory over 4Gig in cmos
> > + u64 high = ((rtc_read(CMOS_MEM_HIGHMEM_LOW) << 16)
> > + | ((u32)rtc_read(CMOS_MEM_HIGHMEM_MID) << 24)
> > @@ -22,6 +31,9 @@ Index: src/fw/paravirt.c
> > + dprintf(1, "RamSizeOver4G: 0x%016llx [cmos]\n", RamSizeOver4G);
> > +}
> > +
> > - // Populate romfile entries for legacy fw_cfg ports (that predate the
> > - // "file" interface).
> > - static void
> > ++void
> > ++vmm_check_high_mem(void)
> > ++{
> > + // Check for memory over 4Gig in cmos
> > + u64 high = ((rtc_read(CMOS_MEM_HIGHMEM_LOW) << 16)
> > + | ((u32)rtc_read(CMOS_MEM_HIGHMEM_MID) << 24)
> > Index: patches/patch-src_optionroms_c
> > ===================================================================
> > RCS file: /cvs/ports/sysutils/firmware/vmm/patches/patch-src_optionroms_c,v
> > retrieving revision 1.2
> > diff -u -p -r1.2 patch-src_optionroms_c
> > --- patches/patch-src_optionroms_c 19 Jul 2017 19:33:51 -0000 1.2
> > +++ patches/patch-src_optionroms_c 9 Dec 2018 10:45:01 -0000
> > @@ -2,9 +2,11 @@ $OpenBSD: patch-src_optionroms_c,v 1.2 2
> >
> > Needed for SGABIOS option ROM for VMM. Normally these are setup based on
> > the qemu fw_cfg interface (or coreboot CBFS on hardware).
> > +Turn of screen-and-debug to prevent double printing of chars.
> >
> > ---- src/optionroms.c.orig Fri Mar 31 09:34:40 2017
> > -+++ src/optionroms.c Fri Mar 31 09:35:35 2017
> > +Index: src/optionroms.c
> > +--- src/optionroms.c.orig
> > ++++ src/optionroms.c
> > @@ -361,7 +361,7 @@ optionrom_setup(void)
> >
> > // All option roms found and deployed - now build BEV/BCV vectors.
> > @@ -14,3 +16,12 @@ the qemu fw_cfg interface (or coreboot C
> > while (pos < rom_get_last()) {
> > struct rom_header *rom = (void*)pos;
> > if (! is_valid_rom(rom)) {
> > +@@ -413,7 +413,7 @@ vgarom_setup(void)
> > + EnforceChecksum = romfile_loadint("etc/optionroms-checksum", 1);
> > + S3ResumeVga = romfile_loadint("etc/s3-resume-vga-init", CONFIG_QEMU);
> > + RunPCIroms = romfile_loadint("etc/pci-optionrom-exec", 2);
> > +- ScreenAndDebug = romfile_loadint("etc/screen-and-debug", 1);
> > ++ ScreenAndDebug = romfile_loadint("etc/screen-and-debug", 0);
> > +
> > + // Clear option rom memory
> > + memset((void*)BUILD_ROM_START, 0, rom_get_max() - BUILD_ROM_START);
> >
>
--
:wq Claudio
No comments:
Post a Comment