The problem is with the ACPI stack, it's known not to work with this
laptop (I have the same one). It worked for one release (6.1 iirc) and
then a regression was introduced that stopped it from working.
hth
Noth
On 03/03/2019 01:01, Fred Crowson wrote:
> do you have an .xsession file in your /home/ directory?
>
> machdep.allowaperture=1 should not be needed for xenodm to work...
>
> I once had a similar issue where the X server would start with a black
> screen until I toggled either the keyboard brightness setting or the
> keyboard shortcut for internal / external monitor.
>
> hth
>
> Fred
>
> On Sat, 2 Mar 2019 at 23:13, Bryan Avery <wingnut615@gmail.com> wrote:
>> I have been unable to start X with a new install of OpenBSD on my
>> laptop. I am a beginner with OpenBSD. This is a Skylake laptop with
>> Intel 520 QHD graphics. During boot, the console shows with underscan,
>> then the resolution increases (but is still less than native), then
>> goes black upon starting Xorg. If I disable xenodm, the console is
>> visible and I am able to login on the laptop. The first time I enabled
>> and started xenodm, the screen went black. I was able to connect
>> through SSH and retrieve the Xorg.0.log which told me to add
>> machdep.allowaperture=1 to /etc/sysctl.conf which I did, but the
>> screen went black again after I rebooted. I am not able to understand
>> what went wrong from looking at the dmesg and Xorg.0.log. I have
>> tested this with and without a config in /etc/X11/xorg.conf.d and get
>> the same result. I am currently using /etc/X11/xorg.conf.d/intel.conf
>> with contents:
>>
>> Section "Device"
>> Identifier "drm"
>> Driver "intel"
>> Option "TearFree" "true"
>> EndSection
>>
>> dmesg:
>>
>> OpenBSD 6.4 (GENERIC.MP) #7: Thu Feb 28 18:56:25 CET 2019
>> root@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> real mem = 8433565696 (8042MB)
>> avail mem = 8168701952 (7790MB)
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe0000 (94 entries)
>> bios0: vendor Dell Inc. version "1.9.0" date 08/31/2018
>> bios0: Dell Inc. XPS 13 9350
>> acpi0 at bios0: rev 2
>> acpi0: sleep states S0 S3 S4 S5
>> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT LPIT SSDT SSDT
>> SSDT DBGP DBG2 SSDT BOOT SSDT UEFI SSDT MSDM SSDT SLIC TCPA DMAR BGRT
>> ASF!
>> acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4)
>> PEG2(S4) PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4)
>> PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) [...]
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2295.40 MHz, 06-4e-03
>> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu0: 256KB 64b/line 8-way L2 cache
>> cpu0: smt 0, core 0, package 0
>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 23MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
>> cpu1 at mainbus0: apid 2 (application processor)
>> cpu1: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2294.66 MHz, 06-4e-03
>> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu1: 256KB 64b/line 8-way L2 cache
>> cpu1: smt 0, core 1, package 0
>> cpu2 at mainbus0: apid 1 (application processor)
>> cpu2: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2294.65 MHz, 06-4e-03
>> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu2: 256KB 64b/line 8-way L2 cache
>> cpu2: smt 1, core 0, package 0
>> cpu3 at mainbus0: apid 3 (application processor)
>> cpu3: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz, 2294.65 MHz, 06-4e-03
>> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu3: 256KB 64b/line 8-way L2 cache
>> cpu3: smt 1, core 1, package 0
>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
>> acpimcfg0 at acpi0
>> acpimcfg0: addr 0xe0000000, bus 0-255
>> acpihpet0 at acpi0: 23999999 Hz
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus -1 (PEG0)
>> acpiprt2 at acpi0: bus -1 (PEG1)
>> acpiprt3 at acpi0: bus -1 (PEG2)
>> acpiprt4 at acpi0: bus 60 (RP09)
>> acpiprt5 at acpi0: bus -1 (RP10)
>> acpiprt6 at acpi0: bus -1 (RP11)
>> acpiprt7 at acpi0: bus -1 (RP12)
>> acpiprt8 at acpi0: bus -1 (RP13)
>> acpiprt9 at acpi0: bus 1 (RP01)
>> acpiprt10 at acpi0: bus -1 (RP02)
>> acpiprt11 at acpi0: bus -1 (RP03)
>> acpiprt12 at acpi0: bus -1 (RP04)
>> acpiprt13 at acpi0: bus 58 (RP05)
>> acpiprt14 at acpi0: bus 59 (RP06)
>> acpiprt15 at acpi0: bus -1 (RP07)
>> acpiprt16 at acpi0: bus -1 (RP08)
>> acpiprt17 at acpi0: bus -1 (RP17)
>> acpiprt18 at acpi0: bus -1 (RP18)
>> acpiprt19 at acpi0: bus -1 (RP19)
>> acpiprt20 at acpi0: bus -1 (RP20)
>> acpiprt21 at acpi0: bus -1 (RP14)
>> acpiprt22 at acpi0: bus -1 (RP15)
>> acpiprt23 at acpi0: bus -1 (RP16)
>> acpiec0 at acpi0
>> acpiec at acpi0 not configured
>> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>> acpipwrres0 at acpi0: PG00, resource for PEG0
>> acpipwrres1 at acpi0: PG01, resource for PEG1
>> acpipwrres2 at acpi0: PG02, resource for PEG2
>> acpipwrres3 at acpi0: WRST
>> acpipwrres4 at acpi0: WRST
>> acpipwrres5 at acpi0: WRST
>> acpipwrres6 at acpi0: WRST
>> acpipwrres7 at acpi0: WRST
>> acpipwrres8 at acpi0: WRST
>> acpipwrres9 at acpi0: WRST
>> acpipwrres10 at acpi0: WRST
>> acpipwrres11 at acpi0: WRST
>> acpipwrres12 at acpi0: WRST
>> acpipwrres13 at acpi0: WRST
>> acpipwrres14 at acpi0: WRST
>> acpipwrres15 at acpi0: WRST
>> acpipwrres16 at acpi0: WRST
>> acpipwrres17 at acpi0: WRST
>> acpipwrres18 at acpi0: WRST
>> acpipwrres19 at acpi0: WRST
>> acpipwrres20 at acpi0: WRST
>> acpipwrres21 at acpi0: WRST
>> acpipwrres22 at acpi0: WRST
>> acpitz0 at acpi0: critical temperature is 107 degC
>> acpipwrres23 at acpi0: FN00, resource for FAN0
>> acpipwrres24 at acpi0: FN01, resource for FAN1
>> acpipwrres25 at acpi0: FN02, resource for FAN2
>> acpipwrres26 at acpi0: FN03, resource for FAN3
>> acpipwrres27 at acpi0: FN04, resource for FAN4
>> acpitz1 at acpi0: critical temperature is 105 degC
>> acpitz2 at acpi0: critical temperature is 105 degC
>> acpicmos0 at acpi0
>> "INT3403" at acpi0 not configured
>> "INT3403" at acpi0 not configured
>> "INT3403" at acpi0 not configured
>> "INT344B" at acpi0 not configured
>> "XXXX0000" at acpi0 not configured
>> "INT3403" at acpi0 not configured
>> "PNP0C14" at acpi0 not configured
>> "INT33A1" at acpi0 not configured
>> tpm0 at acpi0: TPM_ addr 0xfed40000/0x1000: WEC WPCT200 rev 0x2
>> "PNP0C14" at acpi0 not configured
>> acpibtn0 at acpi0: LID0
>> acpibtn1 at acpi0: PBTN
>> acpibtn2 at acpi0: SBTN
>> acpiac0 at acpi0: AC unit online
>> acpibat0 at acpi0: BAT0 model "DELL JHXPY53" serial 2403 type LiP oem "SMP"
>> "INT3400" at acpi0 not configured
>> "PNP0C0B" at acpi0 not configured
>> "PNP0C0B" at acpi0 not configured
>> "PNP0C0B" at acpi0 not configured
>> "PNP0C0B" at acpi0 not configured
>> "PNP0C0B" at acpi0 not configured
>> acpivideo0 at acpi0: GFX0
>> acpivout0 at acpivideo0: LCD_
>> cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2301, 2300, 2200, 2100,
>> 2000, 1800, 1700, 1500, 1400, 1300, 1100, 1000, 800, 700, 500, 400 MHz
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
>> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
>> drm0 at inteldrm0
>> inteldrm0: msi
>> error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to
>> load firmware i915/skl_dmc_ver1.bin (-22)
>> error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC,
>> error -8 (ignored)
>> inteldrm0: 3200x1800, 32bpp
>> error: [drm:pid0:intel_dp_link_training_channel_equalization] *ERROR*
>> 5.4 Gbps link rate without HBR2/TPS3 support
>> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>> "Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
>> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
>> usb0 at xhci0: USB revision 3.0
>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
>> 3.00/1.00 addr 1
>> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
>> dwiic0 at pci0 dev 21 function 0 "Intel 100 Series I2C" rev 0x21: apic 2 int 16
>> iic0 at dwiic0
>> dwiic1 at pci0 dev 21 function 1 "Intel 100 Series I2C" rev 0x21: apic 2 int 17
>> iic1 at dwiic1
>> ihidev0 at iic1 addr 0x2cdwiic1: timed out reading remaining 29
>> , failed fetching initial HID descriptor
>> "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
>> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
>> AHCI 1.3.1
>> scsibus1 at ahci0: 32 targets
>> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
>> pci1 at ppb0 bus 1
>> ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
>> pci2 at ppb1 bus 58
>> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x50, msi
>> ppb2 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
>> pci3 at ppb2 bus 59
>> rtsx0 at pci3 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
>> sdmmc0 at rtsx0: 4-bit, dma
>> ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
>> pci4 at ppb3 bus 60
>> nvme0 at pci4 dev 0 function 0 "Samsung SM951/PM951 NVMe" rev 0x01:
>> msi, NVMe 1.1
>> nvme0: PM951 NVMe SAMSUNG 256GB, firmware BXV77D0Q, serial S29NNXAG983405
>> scsibus2 at nvme0: 1 targets
>> sd0 at scsibus2 targ 0 lun 0: <NVMe, PM951 NVMe SAMSU, BXV7> SCSI4
>> 0/direct fixed
>> sd0: 244198MB, 512 bytes/sector, 500118192 sectors
>> pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
>> "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
>> azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
>> azalia0: codecs: Realtek/0x0256, Intel/0x2809, using Realtek/0x0256
>> audio0 at azalia0
>> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
>> apic 2 int 16
>> iic2 at ichiic0
>> isa0 at pcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>> pckbd0 at pckbc0 (kbd slot)
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> vmm0 at mainbus0: VMX/EPT
>> efifb at mainbus0 not configured
>> uvideo0 at uhub0 port 5 configuration 1 interface 0
>> "CKFEH41I373010011222 Integrated_Webcam_HD" rev 2.01/48.14 addr 2
>> video0 at uvideo0
>> vscsi0 at root
>> scsibus3 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus4 at softraid0: 256 targets
>> sd1 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
>> sd1: 182438MB, 512 bytes/sector, 373634544 sectors
>> root on sd1a (7a9a5283d2185467.a) swap on sd1b dump on sd1b
>> iwm0: hw rev 0x230, fw ver 22.361476.0, address 34:13:e8:58:c0:46
>>
>> Xorg.0.log:
>>
>> [ 13.360] (--) checkDevMem: using aperture driver /dev/xf86
>> [ 13.430] (--) Using wscons driver on /dev/ttyC4
>> [ 13.497]
>> X.Org X Server 1.19.6
>> Release Date: 2017-12-20
>> [ 13.497] X Protocol Version 11, Revision 0
>> [ 13.497] Build Operating System: OpenBSD 6.4 amd64
>> [ 13.497] Current Operating System: OpenBSD c12h17n2o4p.my.domain
>> 6.4 GENERIC.MP#7 amd64
>> [ 13.497] Build Date: 25 October 2018 11:39:05PM
>> [ 13.497]
>> [ 13.497] Current version of pixman: 0.34.0
>> [ 13.497] Before reporting problems, check http://wiki.x.org
>> to make sure that you have the latest version.
>> [ 13.497] Markers: (--) probed, (**) from config file, (==) default setting,
>> (++) from command line, (!!) notice, (II) informational,
>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> [ 13.497] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 2
>> 14:09:48 2019
>> [ 13.499] (==) Using config directory: "/etc/X11/xorg.conf.d"
>> [ 13.499] (==) Using system config directory
>> "/usr/X11R6/share/X11/xorg.conf.d"
>> [ 13.501] (==) No Layout section. Using the first Screen section.
>> [ 13.501] (==) No screen section available. Using defaults.
>> [ 13.501] (**) |-->Screen "Default Screen Section" (0)
>> [ 13.501] (**) | |-->Monitor "<default monitor>"
>> [ 13.502] (==) No device specified for screen "Default Screen Section".
>> Using the first device section listed.
>> [ 13.502] (**) | |-->Device "drm"
>> [ 13.502] (==) No monitor specified for screen "Default Screen Section".
>> Using a default monitor configuration.
>> [ 13.502] (==) Automatically adding devices
>> [ 13.502] (==) Automatically enabling devices
>> [ 13.502] (==) Not automatically adding GPU devices
>> [ 13.502] (==) Max clients allowed: 256, resource mask: 0x1fffff
>> [ 13.510] (==) FontPath set to:
>> /usr/X11R6/lib/X11/fonts/misc/,
>> /usr/X11R6/lib/X11/fonts/TTF/,
>> /usr/X11R6/lib/X11/fonts/OTF/,
>> /usr/X11R6/lib/X11/fonts/Type1/,
>> /usr/X11R6/lib/X11/fonts/100dpi/,
>> /usr/X11R6/lib/X11/fonts/75dpi/
>> [ 13.510] (==) ModulePath set to "/usr/X11R6/lib/modules"
>> [ 13.510] (II) The server relies on wscons to provide the list of
>> input devices.
>> If no devices become available, reconfigure wscons or disable AutoAddDevices.
>> [ 13.510] (II) Loader magic: 0x1b29fff71000
>> [ 13.510] (II) Module ABI versions:
>> [ 13.510] X.Org ANSI C Emulation: 0.4
>> [ 13.510] X.Org Video Driver: 23.0
>> [ 13.510] X.Org XInput driver : 24.1
>> [ 13.510] X.Org Server Extension : 10.0
>> [ 13.511] (--) PCI:*(0:0:2:0) 8086:1916:1028:0704 rev 7, Mem @
>> 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64
>> [ 13.511] (II) LoadModule: "glx"
>> [ 13.513] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
>> [ 13.528] (II) Module glx: vendor="X.Org Foundation"
>> [ 13.528] compiled for 1.19.6, module version = 1.0.0
>> [ 13.528] ABI class: X.Org Server Extension, version 10.0
>> [ 13.528] (II) LoadModule: "intel"
>> [ 13.528] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
>> [ 13.532] (II) Module intel: vendor="X.Org Foundation"
>> [ 13.532] compiled for 1.19.6, module version = 2.99.916
>> [ 13.532] Module class: X.Org Video Driver
>> [ 13.532] ABI class: X.Org Video Driver, version 23.0
>> [ 13.532] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
>> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
>> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
>> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
>> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
>> [ 13.533] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
>> [ 13.533] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
>> [ 13.533] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics:
>> 5200, 6200, P6300
>> [ 13.535] (II) intel(0): Using Kernel Mode Setting driver: i915,
>> version 1.6.0 20151010
>> [ 13.537] (WW) intel(0): Unknown chipset
>> [ 13.537] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
>> sse4.2, avx, avx2
>> [ 13.537] (II) intel(0): Creating default Display subsection in
>> Screen section
>> "Default Screen Section" for depth/fbbpp 24/32
>> [ 13.537] (==) intel(0): Depth 24, (--) framebuffer bpp 32
>> [ 13.537] (==) intel(0): RGB weight 888
>> [ 13.537] (==) intel(0): Default visual is TrueColor
>> [ 13.538] (**) intel(0): Option "TearFree" "true"
>>
No comments:
Post a Comment