I've just committed an update to 2.4.1, can you try that please?
If it doesn't help please try to get a backtrace from egdb (make sure
you install the debug symbols, "make INSTALL_DEBUG_PACKAGES=Yes install"
will do that).
On 2022/03/01 11:58, Marcus MERIGHI wrote:
> Hello!
>
> After upgrading -current yesterday evening (~14hrs ago), reboooting and
> running pkg_add -u, jwm started crashing upon startup. It worked before.
> This was
>
> OpenBSD 7.1-beta (GENERIC.MP) #388: Sun Feb 27 10:38:07 MST 2022
>
> I did another upgrade a couple of minutes ago to
>
> OpenBSD 7.1-beta (GENERIC.MP) #393: Mon Feb 28 21:14:35 MST 2022
>
> and the crash is still there, after pkg_add -u. I have gotten
>
> jwm-2.4.0
>
> The output of the crash is below, followed by the dmesg.
>
> Thanks for reading, Marcus
>
> $ jwm
> thread '<unnamed>' panicked at 'assertion failed: width > 0 && height >
> 0', src/surface_utils/shared_surface.rs:216:9
> note: run with `RUST_BACKTRACE=1` environment variable to display a
> backtrace
> fatal runtime error: failed to initiate panic, error 5
> Abort trap (core dumped)
>
> $ env RUST_BACKTRACE=1 jwm
> thread '<unnamed>' panicked at 'assertion failed: width > 0 && height >
> 0', src/surface_utils/shared_surface.rs:216:9
> stack backtrace:
> 0: rust_begin_unwind
> 1: core::panicking::panic_fmt
> 2: core::panicking::panic
> 3:
> librsvg::surface_utils::shared_surface::ImageSurface<librsvg::surface_utils::shared_surface::Shared>::wrap
> 4: librsvg::drawing_ctx::DrawingCtx::with_discrete_layer
> 5: <librsvg::shapes::Path as librsvg::element::Draw>::draw
> 6: <librsvg::element::Element as librsvg::element::Draw>::draw
> 7: <rctree::Node<librsvg::node::NodeData> as
> librsvg::node::NodeDraw>::draw
> 8: librsvg::drawing_ctx::DrawingCtx::draw_node_from_stack
> 9: <rctree::Node<librsvg::node::NodeData> as
> librsvg::node::NodeDraw>::draw_children
> 10: <librsvg::structure::Svg as
> librsvg::element::Draw>::draw::{{closure}}
> 11: librsvg::drawing_ctx::DrawingCtx::with_discrete_layer
> 12: <librsvg::structure::Svg as librsvg::element::Draw>::draw
> 13: <librsvg::element::Element as librsvg::element::Draw>::draw
> 14: <rctree::Node<librsvg::node::NodeData> as
> librsvg::node::NodeDraw>::draw
> 15: librsvg::drawing_ctx::DrawingCtx::draw_node_from_stack
> 16: librsvg::drawing_ctx::draw_tree
> 17: librsvg::drawing_ctx::with_saved_cr
> 18: librsvg::handle::Handle::render_layer
> 19: rsvg_handle_render_document
> 20: <unknown>
> 21: <unknown>
> 22: <unknown>
> 23: <unknown>
> 24: <unknown>
> 25: <unknown>
> 26: <unknown>
> 27: <unknown>
> note: Some details are omitted, run with `RUST_BACKTRACE=full` for a
> verbose backtrace.
> fatal runtime error: failed to initiate panic, error 5
> Abort trap (core dumped)
>
> $ env RUST_BACKTRACE=full jwm
> thread '<unnamed>' panicked at 'assertion failed: width > 0 && height >
> 0', src/surface_utils/shared_surface.rs:216:9
> stack backtrace:
> 0: 0x73e63b02f64 -
> <std::sys_common::backtrace::_print::DisplayBacktrace as
> core::fmt::Display>::fmt::hb5e496dc9af250bc
> 1: 0x73e63baecbb - core::fmt::write::hd691279e29b15ae8
> 2: 0x73e63aee4c3 - std::io::Write::write_fmt::h93b6b7a8a7893296
> 3: 0x73e63af028b -
> std::panicking::default_hook::{{closure}}::hbf8f907e3d25207b
> 4: 0x73e63aefe3f -
> std::panicking::default_hook::h619135cd287b68e7
> 5: 0x73e63af0b28 -
> std::panicking::rust_panic_with_hook::hce35df252f975871
> 6: 0x73e63b03987 -
> std::panicking::begin_panic_handler::{{closure}}::h47e423866eca0a56
> 7: 0x73e63b03087 -
> std::sys_common::backtrace::__rust_end_short_backtrace::h101b8446dda9a41e
> 8: 0x73e63af0556 - rust_begin_unwind
> 9: 0x73e63b93d90 - core::panicking::panic_fmt::hd1fdf7ffecf71ce3
> 10: 0x73e63b93c68 - core::panicking::panic::h4b6e87b0b65cca0e
> 11: 0x73e6367dd8a -
> librsvg::surface_utils::shared_surface::ImageSurface<librsvg::surface_utils::shared_surface::Shared>::wrap::ha6dfcb428e70830c
> 12: 0x73e6366b842 -
> librsvg::drawing_ctx::DrawingCtx::with_discrete_layer::h58cfe8fb5d1cd698
> 13: 0x73e636d1e15 - <librsvg::shapes::Path as
> librsvg::element::Draw>::draw::hafe54a1d0c2b0512
> 14: 0x73e6362d439 - <librsvg::element::Element as
> librsvg::element::Draw>::draw::h7f31faa7a6b15ddc
> 15: 0x73e637565d3 - <rctree::Node<librsvg::node::NodeData> as
> librsvg::node::NodeDraw>::draw::h15e8680f7f666b80
> 16: 0x73e636739cf -
> librsvg::drawing_ctx::DrawingCtx::draw_node_from_stack::h968bdc8d4cb45866
> 17: 0x73e6375682c - <rctree::Node<librsvg::node::NodeData> as
> librsvg::node::NodeDraw>::draw_children::h577337012aa6739b
> 18: 0x73e636e345f - <librsvg::structure::Svg as
> librsvg::element::Draw>::draw::{{closure}}::hd2b7e984bb510f30
> 19: 0x73e6366bc1e -
> librsvg::drawing_ctx::DrawingCtx::with_discrete_layer::h58cfe8fb5d1cd698
> 20: 0x73e636e2a6b - <librsvg::structure::Svg as
> librsvg::element::Draw>::draw::hc91215d10e333c58
> 21: 0x73e6362d562 - <librsvg::element::Element as
> librsvg::element::Draw>::draw::h7f31faa7a6b15ddc
> 22: 0x73e637565d3 - <rctree::Node<librsvg::node::NodeData> as
> librsvg::node::NodeDraw>::draw::h15e8680f7f666b80
> 23: 0x73e636739cf -
> librsvg::drawing_ctx::DrawingCtx::draw_node_from_stack::h968bdc8d4cb45866
> 24: 0x73e6366814c -
> librsvg::drawing_ctx::draw_tree::h26360e6faacdb1d4
> 25: 0x73e63668576 -
> librsvg::drawing_ctx::with_saved_cr::hbdede00f3cbfa30a
> 26: 0x73e636488c4 -
> librsvg::handle::Handle::render_layer::h20f7d785b7a2df96
> 27: 0x73e636a3efb - rsvg_handle_render_document
> 28: 0x73c545f3961 - <unknown>
> 29: 0x73c545f2882 - <unknown>
> 30: 0x73c545f2329 - <unknown>
> 31: 0x73c545f2201 - <unknown>
> 32: 0x73c545f59f4 - <unknown>
> 33: 0x73c54602c15 - <unknown>
> 34: 0x73c545f5125 - <unknown>
> 35: 0x73c545dd242 - <unknown>
> fatal runtime error: failed to initiate panic, error 5
> Abort trap (core dumped)
>
> OpenBSD 7.1-beta (GENERIC.MP) #393: Mon Feb 28 21:14:35 MST 2022
> deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16031678464 (15289MB)
> avail mem = 15528583168 (14809MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec2f0 (82 entries)
> bios0: vendor American Megatrends Inc. version "1.06" date 03/04/2015
> bios0: Shuttle Inc. DS57U
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT UEFI SSDT ASF! SLIC SSDT SSDT SSDT DMAR
> acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2494.55 MHz, 06-3d-04
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2494.24 MHz, 06-3d-04
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpimadt0: bogus nmi for apid 0
> acpimadt0: bogus nmi for apid 2
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG0)
> acpiprt2 at acpi0: bus -1 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2)
> acpiprt4 at acpi0: bus 1 (RP01)
> acpiprt5 at acpi0: bus -1 (RP02)
> acpiprt6 at acpi0: bus 2 (RP03)
> acpiprt7 at acpi0: bus 3 (RP04)
> acpiprt8 at acpi0: bus -1 (RP05)
> acpiprt9 at acpi0: bus -1 (RP06)
> acpiprt10 at acpi0: bus -1 (RP07)
> acpiprt11 at acpi0: bus -1 (RP08)
> acpiec0 at acpi0: not present
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 3: ns16550a, 16 byte fifo
> com1 at acpi0 UAR2 addr 0x2f8/0x8 irq 4: ns16550a, 16 byte fifo
> acpicmos0 at acpi0
> acpibtn0 at acpi0: SLPB
> acpibtn1 at acpi0: PWRB
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> acpicpu0 at acpi0: C2(500@67 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C2(500@67 mwait.1@0x10), C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PG00, resource for PEG0
> acpipwrres1 at acpi0: PG01, resource for PEG1
> acpipwrres2 at acpi0: PG02, resource for PEG2
> acpipwrres3 at acpi0: FN00, resource for FAN0
> acpipwrres4 at acpi0: FN01, resource for FAN1
> acpipwrres5 at acpi0: FN02, resource for FAN2
> acpipwrres6 at acpi0: FN03, resource for FAN3
> acpipwrres7 at acpi0: FN04, resource for FAN4
> acpitz0 at acpi0: critical temperature is 105 degC
> acpitz1 at acpi0: critical temperature is 105 degC
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2201, 2200, 2100, 2000, 1800, 1700, 1600, 1500, 1300, 1200, 1100, 1000, 900, 700, 600, 500 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi, BROADWELL, gen 8
> azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
> azalia0: No codecs found
> xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address 80:ee:73:ae:e5:56
> azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
> azalia1: codecs: Realtek ALC662
> audio0 at azalia1
> ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi
> pci2 at ppb1 bus 2
> em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 80:ee:73:ae:e5:55
> ppb2 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
> pci3 at ppb2 bus 3
> rtwn0 at pci3 dev 0 function 0 "Realtek 8188EE" rev 0x01: msi
> rtwn0: MAC/BB RTL8188EE, RF 6052 1T1R, address 4c:bb:58:9a:3a:5d
> ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SMS200S, 60AA> naa.50026b726a01e141
> sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
> sd1 at scsibus1 targ 1 lun 0: <ATA, MKNSSDCR120GB-7, 603A> naa.588891410003fc76
> sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa40
> vmm0 at mainbus0: VMX/EPT
> uhidev0 at uhub0 port 1 configuration 1 interface 0 "MemsArt MA144 RF Controller" rev 2.00/1.20 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard
> uhidev1 at uhub0 port 1 configuration 1 interface 1 "MemsArt MA144 RF Controller" rev 2.00/1.20 addr 2
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhidev2 at uhub0 port 1 configuration 1 interface 2 "MemsArt MA144 RF Controller" rev 2.00/1.20 addr 2
> uhidev2: iclass 3/1, 2 report ids
> ucc0 at uhidev2 reportid 1: 669 usages, 18 keys, array
> wskbd1 at ucc0 mux 1
> uhid0 at uhidev2 reportid 2: input=2, output=0, feature=0
> uhidev3 at uhub0 port 2 configuration 1 interface 0 "MemsArt MA144 RF Controller" rev 1.10/1.20 addr 3
> uhidev3: iclass 3/1, 4 report ids
> ucc1 at uhidev3 reportid 1: 669 usages, 18 keys, array
> wskbd2 at ucc1 mux 1
> uhid1 at uhidev3 reportid 2: input=2, output=0, feature=0
> ukbd1 at uhidev3 reportid 3: 8 variable keys, 6 key codes
> wskbd3 at ukbd1 mux 1
> ums1 at uhidev3 reportid 4: 3 buttons, Z dir
> wsmouse1 at ums1 mux 0
> uhub2 at uhub0 port 4 configuration 1 interface 0 "Terminus Technology USB 2.0 Hub" rev 2.00/1.11 addr 4
> uhidev4 at uhub2 port 4 configuration 1 interface 0 "Logitech Logitech Dual Action" rev 2.00/4.14 addr 5
> uhidev4: iclass 3/0
> ujoy0 at uhidev4: input=8, output=7, feature=0
> uhub3 at uhub0 port 5 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 6
> umass0 at uhub3 port 2 configuration 1 interface 0 "Generic USB Storage" rev 2.00/94.54 addr 7
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd2 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 9454> removable
> umass1 at uhub0 port 12 configuration 1 interface 0 "Western Digital My Passport 2627" rev 3.10/40.08 addr 8
> umass1: using SCSI over Bulk-Only
> scsibus3 at umass1: 2 targets, initiator 0
> sd3 at scsibus3 targ 1 lun 0: <WD, My Passport 2627, 4008>
> sd3: 4769275MB, 512 bytes/sector, 9767475200 sectors
> ses0 at scsibus3 targ 1 lun 1: <WD, SES Device, 4008>
> ses0: unable to read enclosure configuration
> uhub4 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> root on sd1a (99cc7b789fff8e5c.a) swap on sd1b dump on sd1b
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wskbd2: connecting to wsdisplay0
> wskbd3: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> Automatic boot in progress: starting file system checks.
> /dev/sd1a (99cc7b789fff8e5c.a): file system is clean; not checking
> /dev/sd1j (99cc7b789fff8e5c.j): file system is clean; not checking
> /dev/sd1e (99cc7b789fff8e5c.e): file system is clean; not checking
> /dev/sd1f (99cc7b789fff8e5c.f): file system is clean; not checking
> /dev/sd1m (99cc7b789fff8e5c.m): file system is clean; not checking
> /dev/sd1g (99cc7b789fff8e5c.g): file system is clean; not checking
> /dev/sd1h (99cc7b789fff8e5c.h): file system is clean; not checking
> /dev/sd1i (99cc7b789fff8e5c.i): file system is clean; not checking
> /dev/sd1k (99cc7b789fff8e5c.k): file system is clean; not checking
> /dev/sd1l (99cc7b789fff8e5c.l): file system is clean; not checking
> /dev/sd1n (99cc7b789fff8e5c.n): file system is clean; not checking
> kbd: keyboard mapping set to de
> pf enabled
> starting network
> reordering libraries: done.
> starting early daemons: syslogd pflogd ntpd.
> starting RPC daemons:.
> savecore: no core dump
> checking quotas: done.
> clearing /tmp
> kern.securelevel: 0 -> 1
> creating runtime link editor directory cache.
> preserving editor files.
> running rc.sysmerge
> ---- /etc/login.conf unhandled, re-run sysmerge to merge the new version
> ---- /etc/newsyslog.conf unhandled, re-run sysmerge to merge the new version
> starting network daemons: sshd dhcpd smtpd sndiod.
> running rc.firsttime
> fw_update: added none; updated none; kept intel,inteldrm,vmm
> starting package daemons: messagebus avahi_daemon mpd ympd mixsvr voice.
> starting local daemons: apmd hotplugd cron xenodm.
> Tue Mar 1 07:17:56 CET 2022
> hw.sensors.cpu0.temp0=47.00 degC
> hw.sensors.acpitz0.temp0=27.80 degC (zone temperature)
> hw.sensors.acpitz1.temp0=29.80 degC (zone temperature)
> hw.sensors.it0.temp0=56.00 degC
> hw.sensors.it0.temp1=248.00 degC
> hw.sensors.it0.temp2=248.00 degC
> hw.sensors.it0.fan0=0 RPM
> hw.sensors.it0.fan1=0 RPM
> hw.sensors.it0.fan2=0 RPM
> hw.sensors.it0.volt0=2.08 VDC (VCORE_A)
> hw.sensors.it0.volt1=1.82 VDC (VCORE_B)
> hw.sensors.it0.volt2=2.64 VDC (+3.3V)
> hw.sensors.it0.volt3=4.62 VDC (+5V)
> hw.sensors.it0.volt4=5.63 VDC (+12V)
> hw.sensors.it0.volt5=4.01 VDC (-12V)
> hw.sensors.it0.volt6=0.62 VDC (-5V)
> hw.sensors.it0.volt7=3.68 VDC (+5VSB)
> hw.sensors.it0.volt8=2.16 VDC (VBAT)
>
No comments:
Post a Comment