Re: Radxa ROCK 4B bwfm

On 2024/07/02 01:17, Lucas Gabriel Vuotto wrote:
> Hello ports@, Kurt, Patrick,
>
> I have a Radxa ROCK 4B [0] lying around. It has a bwfm-compatible WiFi
> but no firmware files. I went ahead and downloaded the files from [1,2]
> (the actual files, not the symlinks, but kept the naming) and the
> network is working in some light testing (tcpdump and ssh). Could it
> be possible to update the firmware to a newer version? I'm not sending
> a patch right away because this ports seems a bit more special than the
> rest. I believe that the relevant files should be added to Kurt's repo.
> Should I send a PR there, get a new release and then update the
> supplemental files version?

I think it would be preferable to fetch them from the armbian repo
rather than copying them to another source.

Unfortunately there are no license files for these so not sure what to
do there.

Also noticed while investigating this (only considering files which
are already in the bwfm-firmware port), linux-firmware has newer files
for 43340 43362 4339 43430 43455 4354 4356-pcie 4356-sdio 43570-pcie
4373 in the cypress (rather than brcm) dir, newer ones in the brcm
dir for 43241b0 4329 4330 4358-pcie, and some fixes for rpi nvram files.

(I can do some light testing for 43143 and whatever's in the pi 3b [chip
not listed in dmesg and it's sdio so pci/usb IDs don't help], the only
other bwfm I have is unsupported plus that's in a MacBook anyway so has
a different firmware fetch mechanism).

> [0]: https://wiki.radxa.com/Rockpi4
> [1]: https://github.com/armbian/firmware/blob/master/brcm/brcmfmac43456-sdio.radxa%2Crockpi4b.bin
> [2]: https://github.com/armbian/firmware/blob/master/brcm/brcmfmac43456-sdio.radxa%2Crockpi4b.txt
> [3]: https://github.com/bsdkurt/brcm-supplemental
>
>
> OpenBSD 7.5-current (GENERIC.MP) #94: Mon Jul 1 06:31:41 MDT 2024
> deraadt@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
> real mem = 4038746112 (3851MB)
> avail mem = 3830820864 (3653MB)
> random: good seed from bootblocks
> mainbus0 at root: Radxa ROCK Pi 4B
> psci0 at mainbus0: PSCI 1.1, SMCCC 1.4, SYSTEM_SUSPEND
> efi0 at mainbus0: UEFI 2.8
> efi0: Das U-Boot rev 0x20211000
> smbios0 at efi0: SMBIOS 3.0
> smbios0: vendor U-Boot version "2021.10" date 10/01/2021
> smbios0: Unknown Unknown Product
> cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
> cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
> cpu0: 512KB 64b/line 16-way L2 cache
> cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
> cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
> cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
> cpu1: 512KB 64b/line 16-way L2 cache
> cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
> cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
> cpu2: 512KB 64b/line 16-way L2 cache
> cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
> cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
> cpu3: 512KB 64b/line 16-way L2 cache
> cpu4 at mainbus0 mpidr 100: ARM Cortex-A72 r0p2
> cpu4: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
> cpu4: 1024KB 64b/line 16-way L2 cache
> cpu4: CRC32,SHA2,SHA1,AES+PMULL,ASID16
> cpu5 at mainbus0 mpidr 101: ARM Cortex-A72 r0p2
> cpu5: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
> cpu5: 1024KB 64b/line 16-way L2 cache
> apm0 at mainbus0
> agintc0 at mainbus0 sec shift 3:3 nirq 288 nredist 6 ipi: 0, 1, 2: "interrupt-controller"
> agintcmsi0 at agintc0
> syscon0 at mainbus0: "qos"
> syscon1 at mainbus0: "qos"
> syscon2 at mainbus0: "qos"
> syscon3 at mainbus0: "qos"
> syscon4 at mainbus0: "qos"
> syscon5 at mainbus0: "qos"
> syscon6 at mainbus0: "qos"
> syscon7 at mainbus0: "qos"
> syscon8 at mainbus0: "qos"
> syscon9 at mainbus0: "qos"
> syscon10 at mainbus0: "qos"
> syscon11 at mainbus0: "qos"
> syscon12 at mainbus0: "qos"
> syscon13 at mainbus0: "qos"
> syscon14 at mainbus0: "qos"
> syscon15 at mainbus0: "qos"
> syscon16 at mainbus0: "qos"
> syscon17 at mainbus0: "qos"
> syscon18 at mainbus0: "qos"
> syscon19 at mainbus0: "qos"
> syscon20 at mainbus0: "qos"
> syscon21 at mainbus0: "qos"
> syscon22 at mainbus0: "qos"
> syscon23 at mainbus0: "qos"
> syscon24 at mainbus0: "qos"
> syscon25 at mainbus0: "power-management"
> "power-controller" at syscon25 not configured
> syscon26 at mainbus0: "syscon"
> "io-domains" at syscon26 not configured
> rkclock0 at mainbus0
> rkclock1 at mainbus0
> syscon27 at mainbus0: "syscon"
> "io-domains" at syscon27 not configured
> "usb2phy" at syscon27 not configured
> "usb2phy" at syscon27 not configured
> rkemmcphy0 at syscon27
> "pcie-phy" at syscon27 not configured
> rktcphy0 at mainbus0
> rktcphy1 at mainbus0
> rkpinctrl0 at mainbus0: "pinctrl"
> rkgpio0 at rkpinctrl0
> rkgpio1 at rkpinctrl0
> rkgpio2 at rkpinctrl0
> rkgpio3 at rkpinctrl0
> rkgpio4 at rkpinctrl0
> pwmreg0 at mainbus0
> syscon28 at mainbus0: "syscon"
> syscon29 at mainbus0: "syscon"
> "fit-images" at mainbus0 not configured
> rkdrm0 at mainbus0
> drm0 at rkdrm0
> "pmu_a53" at mainbus0 not configured
> "pmu_a72" at mainbus0 not configured
> agtimer0 at mainbus0: 24000 kHz
> "xin24m" at mainbus0 not configured
> rkpcie0 at mainbus0
> rkpcie0: link training timeout
> dwge0 at mainbus0: rev 0x35, address f6:d2:37:a3:9f:1b
> rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
> dwmmc0 at mainbus0: 50 MHz base clock
> sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
> dwmmc1 at mainbus0: 50 MHz base clock
> sdmmc1 at dwmmc1: 4-bit, sd high-speed, mmc high-speed, dma
> sdhc0 at mainbus0
> sdhc0: SDHC 3.00, 200 MHz base clock
> sdmmc2 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
> ehci0 at mainbus0
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
> ohci0 at mainbus0: version 1.0
> ehci1 at mainbus0
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
> ohci1 at mainbus0: version 1.0
> rkdwusb0 at mainbus0: "usb"
> xhci0 at rkdwusb0, xHCI 1.10
> usb2 at xhci0: USB revision 3.0
> uhub2 at usb2 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
> rkdwusb1 at mainbus0: "usb"
> xhci1 at rkdwusb1, xHCI 1.10
> usb3 at xhci1: USB revision 3.0
> uhub3 at usb3 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
> "saradc" at mainbus0 not configured
> rkiic0 at mainbus0
> iic0 at rkiic0
> rkiic1 at mainbus0
> iic1 at rkiic1
> com0 at mainbus0: dw16550, 64 byte fifo
> com1 at mainbus0: dw16550, 64 byte fifo
> com1: console
> rktemp0 at mainbus0
> rkiic2 at mainbus0
> iic2 at rkiic2
> rkpmic0 at iic2 addr 0x1b: RK808
> fanpwr0 at iic2 addr 0x40: SYR827, 1.00 VDC
> fanpwr1 at iic2 addr 0x41: SYR828, 1.00 VDC
> rkiic3 at mainbus0
> iic3 at rkiic3
> rkpwm0 at mainbus0
> "video-codec" at mainbus0 not configured
> "iommu" at mainbus0 not configured
> "video-codec" at mainbus0 not configured
> "iommu" at mainbus0 not configured
> "rga" at mainbus0 not configured
> "efuse" at mainbus0 not configured
> "dma-controller" at mainbus0 not configured
> "dma-controller" at mainbus0 not configured
> "watchdog" at mainbus0 not configured
> "rktimer" at mainbus0 not configured
> rkiis0 at mainbus0
> rkiis1 at mainbus0
> rkiis2 at mainbus0
> rkvop0 at mainbus0: RK3399 VOPL
> "iommu" at mainbus0 not configured
> rkvop1 at mainbus0: RK3399 VOPB
> "iommu" at mainbus0 not configured
> "iommu" at mainbus0 not configured
> "iommu" at mainbus0 not configured
> simpleaudio0 at mainbus0
> rkdwhdmi0 at mainbus0: HDMI TX
> rkdwhdmi0: version 2.11a, phytype 0xf3
> "gpu" at mainbus0 not configured
> "opp-table0" at mainbus0 not configured
> "opp-table1" at mainbus0 not configured
> "opp-table2" at mainbus0 not configured
> "external-gmac-clock" at mainbus0 not configured
> "sdio-pwrseq" at mainbus0 not configured
> "dc-12v" at mainbus0 not configured
> "vcc-sys" at mainbus0 not configured
> "vcc-0v9" at mainbus0 not configured
> "vcc3v3-pcie-regulator" at mainbus0 not configured
> "vcc3v3-sys" at mainbus0 not configured
> "vcc5v0-host-regulator" at mainbus0 not configured
> "vcc5v0-typec-regulator" at mainbus0 not configured
> "vcc3v3-phy-regulator" at mainbus0 not configured
> "binman" at mainbus0 not configured
> "dfi" at mainbus0 not configured
> rkrng0 at mainbus0: ver 1
> "dmc" at mainbus0 not configured
> usb4 at ohci0: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
> usb5 at ohci1: USB revision 1.0
> uhub5 at usb5 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
> bwfm0 at sdmmc0 function 1
> manufacturer 0x02d0, product 0xa9bf at sdmmc0 function 2 not configured
> manufacturer 0x02d0, product 0xa9bf at sdmmc0 function 3 not configured
> scsibus0 at sdmmc1: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EE4S5, 0030> removable
> sd0: 244480MB, 512 bytes/sector, 500695040 sectors
> scsibus1 at sdmmc2: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <SD/MMC, SLD32G, 0000> removable
> sd1: 29600MB, 512 bytes/sector, 60620800 sectors
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd2: 244447MB, 512 bytes/sector, 500628976 sectors
> root on sd2a (656793cc3f542ebc.a) swap on sd2b dump on sd2b
> WARNING: bad clock chip time
> WARNING: CHECK AND RESET THE DATE!
> rkvop0: using CRTC 0 for RK3399 VOPL
> rkvop1: using CRTC 1 for RK3399 VOPB
> drm:pid0:drm_fb_helper_find_format *WARNING* [drm] bpp/depth value of 32/24 not supported
> drm:pid0:drm_fb_helper_find_format *WARNING* [drm] bpp/depth value of 32/24 not supported
> drm:pid0:__drm_fb_helper_find_sizes *WARNING* [drm] No compatible format found
> rkdrm0: 1024x768, 32bpp
> wsdisplay0 at rkdrm0 mux 1
> wsdisplay0: screen 0-5 added (std, vt100 emulation)
> bwfm0: address 08:e9:f6:58:d5:f4
>